• Which the release of FS2020 we see an explosition of activity on the forun and of course we are very happy to see this. But having all questions about FS2020 in one forum becomes a bit messy. So therefore we would like to ask you all to use the following guidelines when posting your questions:

    • Tag FS2020 specific questions with the MSFS2020 tag.
    • Questions about making 3D assets can be posted in the 3D asset design forum. Either post them in the subforum of the modelling tool you use or in the general forum if they are general.
    • Questions about aircraft design can be posted in the Aircraft design forum
    • Questions about airport design can be posted in the FS2020 airport design forum. Once airport development tools have been updated for FS2020 you can post tool speciifc questions in the subforums of those tools as well of course.
    • Questions about terrain design can be posted in the FS2020 terrain design forum.
    • Questions about SimConnect can be posted in the SimConnect forum.

    Any other question that is not specific to an aspect of development or tool can be posted in the General chat forum.

    By following these guidelines we make sure that the forums remain easy to read for everybody and also that the right people can find your post to answer it.

FSXA Error with LOD's

Angelus1971

Resource contributor
Messages
195
Country
scotland
Good Morning Arno

I have come across an error when clicking the seperate LOD numbers in the level Of Detail Creator.

It says

Unhandled exception has occurred in your application. If you click
Continue, the application will ignore this error and attempt to continue. If
yu click Quit, the application will close immediately.

InvalidArguement=Value of '0' is ot valid for 'index'.
Parameter name: index.



The details are as follows
See the end of this message for details on invoking
just-in-time (JIT) debugging instead of this dialog box.

************** Exception Text **************
System.ArgumentOutOfRangeException: InvalidArgument=Value of '0' is not valid for 'index'.
Parameter name: index
at System.Windows.Forms.ListView.SelectedListViewItemCollection.get_Item(Int32 index)
at ASToFra.LODCreator.lstStats_SelectedIndexChanged(Object sender, EventArgs e)
at System.Windows.Forms.ListView.OnSelectedIndexChanged(EventArgs e)
at System.Windows.Forms.ListView.WmReflectNotify(Message& m)
at System.Windows.Forms.ListView.WndProc(Message& m)
at System.Windows.Forms.Control.ControlNativeWindow.OnMessage(Message& m)
at System.Windows.Forms.Control.ControlNativeWindow.WndProc(Message& m)
at System.Windows.Forms.NativeWindow.Callback(IntPtr hWnd, Int32 msg, IntPtr wparam, IntPtr lparam)


************** Loaded Assemblies **************
mscorlib
Assembly Version: 2.0.0.0
Win32 Version: 2.0.50727.4927 (NetFXspW7.050727-4900)
CodeBase: file:///C:/Windows/Microsoft.NET/Framework/v2.0.50727/mscorlib.dll
----------------------------------------
ModelConverterX
Assembly Version: 1.0.0.0
Win32 Version: 1.2.0.0
CodeBase: file:///D:/FSX%20Tools/Model%20Converter%20X/ModelConverterX.exe
----------------------------------------
System.Windows.Forms
Assembly Version: 2.0.0.0
Win32 Version: 2.0.50727.4927 (NetFXspW7.050727-4900)
CodeBase: file:///C:/Windows/assembly/GAC_MSIL/System.Windows.Forms/2.0.0.0__b77a5c561934e089/System.Windows.Forms.dll
----------------------------------------
System
Assembly Version: 2.0.0.0
Win32 Version: 2.0.50727.4927 (NetFXspW7.050727-4900)
CodeBase: file:///C:/Windows/assembly/GAC_MSIL/System/2.0.0.0__b77a5c561934e089/System.dll
----------------------------------------
System.Drawing
Assembly Version: 2.0.0.0
Win32 Version: 2.0.50727.4927 (NetFXspW7.050727-4900)
CodeBase: file:///C:/Windows/assembly/GAC_MSIL/System.Drawing/2.0.0.0__b03f5f7f11d50a3a/System.Drawing.dll
----------------------------------------
System.Configuration
Assembly Version: 2.0.0.0
Win32 Version: 2.0.50727.4927 (NetFXspW7.050727-4900)
CodeBase: file:///C:/Windows/assembly/GAC_MSIL/System.Configuration/2.0.0.0__b03f5f7f11d50a3a/System.Configuration.dll
----------------------------------------
System.Xml
Assembly Version: 2.0.0.0
Win32 Version: 2.0.50727.4927 (NetFXspW7.050727-4900)
CodeBase: file:///C:/Windows/assembly/GAC_MSIL/System.Xml/2.0.0.0__b77a5c561934e089/System.Xml.dll
----------------------------------------
ObjectWriter
Assembly Version: 1.0.0.0
Win32 Version: 1.2.0.0
CodeBase: file:///D:/FSX%20Tools/Model%20Converter%20X/ObjectWriter.DLL
----------------------------------------
TextureObject
Assembly Version: 1.0.0.0
Win32 Version: 1.2.0.0
CodeBase: file:///D:/FSX%20Tools/Model%20Converter%20X/TextureObject.DLL
----------------------------------------
ObjectModel3D
Assembly Version: 1.0.0.0
Win32 Version: 1.2.0.0
CodeBase: file:///D:/FSX%20Tools/Model%20Converter%20X/ObjectModel3D.DLL
----------------------------------------
ObjectRenderer
Assembly Version: 1.0.0.0
Win32 Version: 1.2.0.0
CodeBase: file:///D:/FSX%20Tools/Model%20Converter%20X/ObjectRenderer.DLL
----------------------------------------
GRV11DLL
Assembly Version: 1.0.0.0
Win32 Version: 1.0.0.0
CodeBase: file:///D:/FSX%20Tools/Model%20Converter%20X/GRV11DLL.DLL
----------------------------------------
ObjectReader
Assembly Version: 1.0.0.0
Win32 Version: 1.2.0.0
CodeBase: file:///D:/FSX%20Tools/Model%20Converter%20X/ObjectReader.DLL
----------------------------------------
TextureLoader
Assembly Version: 1.0.0.0
Win32 Version: 1.2.0.0
CodeBase: file:///D:/FSX%20Tools/Model%20Converter%20X/TextureLoader.DLL
----------------------------------------
ObjectEditor
Assembly Version: 1.0.0.0
Win32 Version: 1.2.0.0
CodeBase: file:///D:/FSX%20Tools/Model%20Converter%20X/ObjectEditor.DLL
----------------------------------------

************** JIT Debugging **************
To enable just-in-time (JIT) debugging, the .config file for this
application or computer (machine.config) must have the
jitDebugging value set in the system.windows.forms section.
The application must also be compiled with debugging
enabled.

For example:

<configuration>
<system.windows.forms jitDebugging="true" />
</configuration>

When JIT debugging is enabled, any unhandled exception
will be sent to the JIT debugger registered on the computer
rather than be handled by this dialog box.


My OS is Win 7 x64 Enterprise

I hope i've given you enough details to go on. If not, just shout with what you need.


And one silly question, Can you delete a LOD level? I cant seem to find a way.


Thanks


Rory
 

arno

Administrator
Staff member
FSDevConf team
Resource contributor
Messages
32,859
Country
netherlands
Hi Rory,

I will try to reproduce this error.

About removing a LOD, if you select it in the LOD Creator you can use the backspace button to remove the LOD.
 

arno

Administrator
Staff member
FSDevConf team
Resource contributor
Messages
32,859
Country
netherlands
Hi,

Are you using the stable version 1.1 or the latest development release? I can not yet reproduce the problem here on my PC. Does it happen with any LOD you select or only with some objects?
 

Angelus1971

Resource contributor
Messages
195
Country
scotland
Hi,

Are you using the stable version 1.1 or the latest development release? I can not yet reproduce the problem here on my PC. Does it happen with any LOD you select or only with some objects?

Hi

I'm using your latest development release - .exe build 1.2.0.0 13/01/2010 02:00

I was using the FSXA B737_800 and the error happens on al LOD's.

Thanks


Just checked - It does it with default Bell 206B as well, on ay LOD change.
 
Last edited:

arno

Administrator
Staff member
FSDevConf team
Resource contributor
Messages
32,859
Country
netherlands
Thanks for the feedback, I'll give it another try to see if I can reproduce.
 
Top