1. This site uses cookies. By continuing to use this site, you are agreeing to our use of cookies. Learn More.

Gmax Exporter Problem

Discussion in 'Modeling' started by Robert Benning, 19/2/08.

  1. Robert Benning

    Robert Benning

    Joined:
    19/2/08
    Messages:
    5
    Country:
    germany
    Hi @ all

    I have a big problem with makemdl Exporting. I´m working actually on my bk117 final edition and makemdl shows the following error message:

    Generate crash tree 1 (920 bytes)
    Assembling: C:\gmax\meshes\bk117FV.azm
    C:\gmax\meshes\bk117FV_1.asm(65534) : error A2071: initializer magnitude too large for specified size
    DRAW_TRI_BEGIN(2): Macro Called From
    C:\gmax\meshes\bk117FV_1.asm(65534): Include File
    C:\gmax\meshes\bk117FV_0.asm(65534) : error A2071: initializer magnitude too large for specified size
    DRAW_TRI_BEGIN(2): Macro Called From
    C:\gmax\meshes\bk117FV_0.asm(65534): Include File
    C:\gmax\meshes\bk117FV_0.asm(65534) : error A2071: initializer magnitude too large for specified size
    DRAW_TRI_BEGIN(2): Macro Called From
    C:\gmax\meshes\bk117FV_0.asm(65534): Include File
    C:\gmax\meshes\bk117FV_0.asm(65534) : error A2071: initializer magnitude too large for specified size
    DRAW_TRI_BEGIN(2): Macro Called From
    C:\gmax\meshes\bk117FV_0.asm(65534): Include File
    C:\gmax\meshes\bk117FV_0.asm(65534) : error A2071: initializer magnitude too large for specified size
    DRAW_TRI_BEGIN(2): Macro Called From
    C:\gmax\meshes\bk117FV_0.asm(65534): Include File
    C:\gmax\meshes\bk117FV_0.asm(65534) : error A2071: initializer magnitude too large for specified size
    DRAW_TRI_BEGIN(2): Macro Called From
    C:\gmax\meshes\bk117FV_0.asm(65534): Include File
    Error!


    Can somone help me with this problem? That would be very nice!
    I have no idea what it is!

    Thanx

    Robert Benning

    ICARO Development Team
  2. Robert Benning

    Robert Benning

    Joined:
    19/2/08
    Messages:
    5
    Country:
    germany
    So and there´s a second error message which is:

    Generate crash tree 1 (912 bytes)
    Assembling: C:\gmax\meshes\bk117fv5.azm
    Error!


    What does this mean?

    Thanks a lot!

    Robert Benning
  3. CharlyT

    CharlyT

    Joined:
    15/2/08
    Messages:
    6
    Country:
    germany
    Hi Robert,

    please set the language settings in Windows to english (USA). The point will be interpreted as a comma!

    I had nearly the same issue and with this trick it worked!

    Best regards und Grüße aus Hamburg,

    Charly
  4. Robert Benning

    Robert Benning

    Joined:
    19/2/08
    Messages:
    5
    Country:
    germany
    Thanx a lot!

    It really worked!

    Schöne grüsse aus münchen


    Robert Benning

Share This Page