1. This site uses cookies. By continuing to use this site, you are agreeing to our use of cookies. Learn More.

Map Tutorial

Discussion in 'Ground2k4, SBuilder, SBuilderX' started by Shamir, 5/4/07.

  1. Shamir

    Shamir

    Joined:
    18/1/07
    Messages:
    93
    Country:
    dominicanrepublic
    Is there any tutorial on how to get a Map to the Sbuilder, as REFERENCE!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!
    from taking the pic, to calibrating it, to adding the polys:)
  2. scruffyduck

    scruffyduck Administrator Staff Member FSDevConf team Resource contributor

    Joined:
    17/9/05
    Messages:
    25,483
    Country:
    wales
    Try checking over at www.fs-freeflow.com in the Shop Talk Forum. I think Scott may have made a tutorial for something similar to what you want
  3. José

    José

    Joined:
    10/11/06
    Messages:
    490
    Country:
    brazil
    Whichversion?

    Hi,

    Which Sbuilder's version are you talking about, Sbuilder v.2.05 or Sbuilder for FSX?

    Regards,

    José
  4. Shamir

    Shamir

    Joined:
    18/1/07
    Messages:
    93
    Country:
    dominicanrepublic
    Sbuilder for FS9 2.06
  5. Shamir

    Shamir

    Joined:
    18/1/07
    Messages:
    93
    Country:
    dominicanrepublic
    ok, i did my Landclass, but when i export : well watch the picture
    [​IMG]
  6. scruffyduck

    scruffyduck Administrator Staff Member FSDevConf team Resource contributor

    Joined:
    17/9/05
    Messages:
    25,483
    Country:
    wales
    That is because you have not selected anything before you tried to compile it. Make sure to use Select > Select All before trying to make a Bgl
  7. José

    José

    Joined:
    10/11/06
    Messages:
    490
    Country:
    brazil
    Hi, Shamir

    You can get your map in the below address:

    http://www.ptsim.com/sbuilder/gmaps.htm

    Take note of its coordinates (example) as displayed:

    [GEOGRAPHIC]
    North=41.59663816589289
    South=41.57737908284747
    West=-8.462176322937011
    East=-8.427844047546386

    Use those coordinates to register your map in SBuilder V2.06

    Sbuilder for FSX doesn't need that kind of background, but can automattically register background tiles from Manifold Toolbar.

    Regards,

    José

Share This Page