• Which the release of FS2020 we see an explosition of activity on the forun and of course we are very happy to see this. But having all questions about FS2020 in one forum becomes a bit messy. So therefore we would like to ask you all to use the following guidelines when posting your questions:

    • Tag FS2020 specific questions with the MSFS2020 tag.
    • Questions about making 3D assets can be posted in the 3D asset design forum. Either post them in the subforum of the modelling tool you use or in the general forum if they are general.
    • Questions about aircraft design can be posted in the Aircraft design forum
    • Questions about airport design can be posted in the FS2020 airport design forum. Once airport development tools have been updated for FS2020 you can post tool speciifc questions in the subforums of those tools as well of course.
    • Questions about terrain design can be posted in the FS2020 terrain design forum.
    • Questions about SimConnect can be posted in the SimConnect forum.

    Any other question that is not specific to an aspect of development or tool can be posted in the General chat forum.

    By following these guidelines we make sure that the forums remain easy to read for everybody and also that the right people can find your post to answer it.

Search results

  1. Mameni

    P3D v5 ICAO change

    Forgot to mention that Flight Plans have been creates with AI Flight Planner
  2. Mameni

    P3D v5 ICAO change

    Hello guys, Jorge Chavez Airport in Lima Peru has changed its ICAO from SPIM to SPJC. I have a lot of Flight Plans created with SPIM I am using P3Dv5 and I am wondering if my old Flight Plans will be recognized if I delete SPIM from the list of Airports with ADE and create the new one SPJC which...
  3. Mameni

    P3D v4 HAAB AIRPORT

    Edited the default HAAB of Ethiopia, adding a few buildings and when placed on P3Dv4.5 part of the airport shows below ground level & part of it is correct ie both runways. Have tried to correct this by using an Exclusion rectangle Flattening Mask Class Map Exclude autogen without achieving...
  4. Mameni

    P3D v4 Reverse Thrust on 4 engines

    Hi guys been away for a while, sorry about that. See that on which 4 engine aircraft I have the problem, and the answer is on all that I have ie B747, A340 Forgot to tell you that I am using Spad.next to configure all regards
  5. Mameni

    P3D v4 Reverse Thrust on 4 engines

    Hi guys no luck till today, lot of views to my post but unfortunately no ideas as to how to get reverse thrust on a 4 engine aircraft. Will keep waiting for someone brighter than me Regards
  6. Mameni

    P3D v4 Reverse Thrust on 4 engines

    Hello guys, wonder if someone can help me out on this matter. I have 2 Proquadrants already configured for a 2 engine airpane working perfectly: The right lever of the USB Quadrant is configured as follows Event button pressed, Action Send Throttle1 DECR Parameter 16383 Event button released...
  7. Mameni

    2 runways on same path stock airport

    Hi guys did the same and ADE kept the two eeal ILSs, thanks for the help
  8. Mameni

    2 runways on same path stock airport

    Chris sorry for replying so late, but was away from home. So you deleted R26L/08R running underneath R07R/25L and what happend with the stock ILS for R07/25L? does ADE show this ILS? or was it deleted also? by the way I’m using P3Dv4.5
  9. Mameni

    2 runways on same path stock airport

    Hi guys, wonder if somebody can help me understand and correct what the Stock for Frankfort Main EDDF shows: Under Runway R07R/25L runs another Runway R26L/R08R listed as a separate runway, which is wrong and I can not delete, both run following the same path? one under the other one? This...
  10. Mameni

    P3D v4 No sound,no vehicle nor aircraft movement

    Hello guys, After updating to P3Dv4.5 last hotfix 3 & using WIN10 & Spad.next I have the following problems: Let me start by saying that all of my instruments have been set up at Spad.next, but at the cockpit, although they move accordingly, ie the throttles at full thrust, the aircraft does not...
  11. Mameni

    P3D v4 No Sound, Aircraft not responding

    In addition to the explained problem I have now realized that right after exiting P3Dv4.5 a message pops up saying : “ content problems have found” & the path to see them, & there are really quite a few. This is also something new which I have never had before.
  12. Mameni

    P3D v4 No Sound, Aircraft not responding

    Tough luck guys still have the problem can’t figure out what’s happening? Note sure if its a P3D or Spad.next problem. Hope to have some idea as of tomorrow Regards
  13. Mameni

    P3D v4 No Sound, Aircraft not responding

    Hello guys, After updating to P3Dv4.5 & using WIN10 & Spad.next I have the following problems: Let me start by saying that all of my instruments have been set up at Spad.next, but at the cockpit, although they move accordingly, ie the throttles at full thrust, the aircraft does not move at all...
  14. Mameni

    MSFS FS2020 & Spad.next

    Hi guys hope someone helps me understand what's going on: I have Spad.next Complete Edition installed and the following Saitek instruments set: Saitek Quadrant(USB), Saitek Quad(Yoke),Saitek Pro Flight Yoke,Saitek Rudder Pedals ,Saitek Radio Panel, Saitek BiP Panel, Saitek Multi Panel, Saitek...
  15. Mameni

    ADE Shp2 compiler

    Hello Guys, Changed my PC and in doing so, had to re install my P3Dv4.5 and its SDK Installed them and all seems OK However when I opened ADE version 1.78, and all of my previous airport where correctly found, I tried to Save As one of the airports, and the path that I had placed was correct and...
  16. Mameni

    FSX MSFS2020 Simobjects Airplane Folder

    I am still studying the Official One Store page and noticed thar everyeach of the folders there, airplanes, airports, have 3 locks, 2 inside the folder, 1 outside. does this means that they are in effect locked? and if so what is there to do? unlock them? please advice, and sorry for my lack of...
  17. Mameni

    FSX MSFS2020 Simobjects Airplane Folder

    Thanks for the information A31 will take a closer look at the Asobo-aircraft folders
  18. Mameni

    FSX MSFS2020 Simobjects Airplane Folder

    Thanks for the info about ADE for MSFS 2020 beta, guess that the problem to find the paths for the Scenery Folder, the Main FS Folder & the bglcomp & ShpZvec, will be the same, I mean where are there in MSFS2020?
  19. Mameni

    FSX MSFS2020 Simobjects Airplane Folder

    Took a look and still can't manage to get hold of the aircraft folder. I use fsrepaint to paint airplanes and it needs the Flight Simulator to locate the installed airplanes, so I gave the following path...
  20. Mameni

    FSX MSFS2020 Simobjects Airplane Folder

    OK guys thanks a lot you really have been very helpfull. Will try all suggestions
Top