Search results

  1. K

    swift pilot client looking for developers (unpaid, open source)

    swift pilot client is a free open source pilot client for FSD protocol servers. It supports the following simulators: FSX, FS9, P3D, XPlane, and FlightGear. Further information can be found here: https://dev.swift-project.org/ swift is developed in C++/Qt. Currently we are testing our beta...
  2. K

    FSX Adding AI rotorcraft

    Is there something special to consider when I add rotorcraft as AI objects using: SimConnect_AICreateNonATCAircraft(m_hSimConnect, modelStringBa.constData(), csBa.constData(), initialPosition, requestId); For no obvious reason all aircraft work, but all rotorcraft (like BELL JETRANGER) fail...
  3. K

    P3D v4 COM Unit receiving status (COM TRANSMIT:x COM TEST:1) and volume

    Excellent, that would never had crossed my mind.
  4. K

    P3D v4 COM Unit receiving status (COM TRANSMIT:x COM TEST:1) and volume

    I use the below vars to get the status of my COM UNIT - COM status is pretty well explained in the docu - Transmit as well What I cannot figure out is COM TEST, it is always false in my test cases (??? no idea why, testing P3D standard planes) Q1: How can I get the receiving status of a UNIT...
  5. K

    SIMCONNECT_DATA_INITPOSITION negative Airspeed

    How do I handle negative airspeed? DWORD is unsigned, so what do I do for - pushback? - helicopters/VTOL flying backwards? struct SIMCONNECT_DATA_INITPOSITION { double Latitude; // degrees double Longitude; // degrees double Altitude; // feet double Pitch; //...
  6. K

    SIMCONNECT_EXCEPTION_CREATE_OBJECT_FAILED -> get object id

    When I get an SIMCONNECT_EXCEPTION_CREATE_OBJECT_FAILED exception, is there any direct way to get the object id of the failed object (or the request id)? The only way I have found is via the send id.
  7. K

    P3D v3 Wheels turn for on ground AI aircraft not moving

    If I place my AI aircraft on ground, gear down, on ground flag set, I see sometimes the wheels turning even though the plane is not moving. Sometimes this is not happening (steady wheels). However, since there is not SimConnect parameter (AFAIK) to switch on/off turning wheel, I wonder what the...
  8. K

    FSX Invisible or very small AI object

    Correct, stupid typo, did mean "sim.cfg". Thanks for the hint, will try that
  9. K

    FSX Invisible or very small AI object

    In general yes (that means I would be willing to do that), but I have never created one. I was wondering what a minimal SimConnect.cfg sim.cfg would need to look like and whether I need any textures for that. Or is there a possibility to create one entry with 0 dimensions, speeds etc. and no...
  10. K

    FSX Invisible or very small AI object

    I want to use an invisible (or very small) AI object in order to obtain its ground elevation. Do you have any idea which AI object I can use for that? Or is there any AI object I can download for that? I want this object to be invisible as I just use it as bogus object (terrain probe) and it is...
  11. K

    P3D v4 [solved] Get ground elevation (altitude) at arbitrary coordinates

    Yep, "SimConnect_RequestGroundInfo" works fine
  12. K

    P3D v4 [solved] Get ground elevation (altitude) at arbitrary coordinates

    I have found a function "SimConnect_RequestGroundInfo" which does not require an object placed at that very position. I'll give that a trial.
  13. K

    [FSX] Question on how to get altitude of coordinates

    I have the same question: https://www.fsdeveloper.com/forum/threads/get-ground-elevation-altitude-at-arbitrary-coordinates.442545/ Can I get the code of sim_probe somewhere? The above link is dead. What AI aircraft is used, ideally the AI aircraft / object is invisible?
  14. K

    P3D v4 Change view via simConnect (to AI view)

    In P3D I can follow AI aircraft by changing to a view which follows the plane. Can I open such a view / switch to that view via SimConnect. Ideally I would be able able to retrieve all view names, search them in my code and the select it FSX/P3D.
  15. K

    P3D v4 [solved] Get ground elevation (altitude) at arbitrary coordinates

    I need to obtain the scenery's ground elevation at a given position (latitude/longitude). I found the following thread here: https://www.fsdeveloper.com/forum/threads/fsx-question-on-how-to-get-altitude-of-coordinates.19344/#post-127891 Obviously the only way is to create a dummy AI object and...
  16. K

    P3D v3 Start MCX from external application

    I want to start MCX as viewer from an external application. It works, I pass the aircraft.cfg file path as parameter. However, I do have 2 questions: could I somehow pass the livery which is displayed after startup (as 2nd parameter). The aircraft.cfg contains multiple liveries and I want to...
  17. K

    FSX:SE SimConnect removes my AI object

    I do have the same issue: http://www.fsdeveloper.com/forum/threads/added-ai-aircraft-removed-directly-after-adding-it-why.439356/ I have not yet found a pattern or root cause. However. After the AI failed (added -> removed) I can add it some time later.
  18. K

    SimConnect with P3D, SimConnectP3D confusion

    Coming from FSX/SimConnect I am a bit confused about SimConnect with P3D. I have downloaded the SDK. It contains a SimConnect.lib, but no SimConnect.dll (or do I have miss it?). From friends I know that there is a SimConnectP3D.dll developed by LM/Peter Dowson. I understand this is only needed...
  19. K

    FSXA Added AI aircraft removed directly after adding it - why?

    When I add an AI aircraft, I do sometimes see the same aircraft removed right after. So if I add an aircraft (let`s say with id 10) it is reported as removed instantly. Reading about the reality bubble I understand there might be situations when I cannot add an AI aircraft. However, from my...
  20. K

    FSXA Set TAXI lights for AI traffic

    Yep, works better. Thanks. The clumsy thing is that I have to toggle some lights, other values I can set "absolutely" (0/1). The problem with toggling values is that I have to determine the "is-state" first. I wonder why they support set for some values only.
Top