Aircraft floating above tarmac

#1
I noticed that my Opensky CRJ 700 is floating a few feet above the tarmac when parked. See my picture.
This can't be normal. Science hasn't found an anti-gravity solution yet.
So, is there a way to put her with het wheels on the ground?

OpenskyCRJ7.jpg


Thanks.
 

gfxpilot

Resource contributor
#2
Is this a default airport?
have you checked the so altitude against charts?
Have you checked in a range of other airports as well to see if it's the aircraft or airport.

is this a remodel aircraft or is it out of the box. Remodels are notorious for not being grounded when
 
#4
You can forget a possible altitude problem. I checked it with other aircraft and other airports.
The default FSX CRJ 700 grounds OK. But the Opensky CRJ 700 doesn't. While they have the same values in contact points.

However, which contact point are involved?
 
#5
I had the same problem with a DHC3 (vertical position).
The colored values should be lower:
point.0=1, -27.390, 0.000, -2.100, 1200, 0, 0.480, 90.000, 0.400, 2.500, 0.800, 0.000, 0.000, 0

point.1= 1, 1.920, -5.800, -6.350, 1600, 1, 0.950, 0.000, 0.400, 2.500, 0.800, 0.000, 0.000, 0

point.2= 1, 1.920, 5.800, -6.350, 1600, 2, 0.950, 0.000, 0.400, 2.500, 0.800, 0.000, 0.000, 0
 
#6
Solved! I lowered the corresponding contactpoints by 2 each. And that did the trick.
Thanks very much Flatterman, much appriciated.
 

Heretic

Resource contributor
#8
The default FSX CRJ 700 grounds OK. But the Opensky CRJ 700 doesn't. While they have the same values in contact points.
You might have to models of the exact same aircraft, but that doesn't mean that their reference point matches exactly. Hence the discrepancy.
 
Top