Cabin Lighting

#1
I understand that brightness is controlled by the color settings in the [ParticleAttributes] section of the file. My problem is that I need to control the range of the effect. The cabin looks good, but lighting up the landing gear under the wing is not so good. Also, I now have to have a specular set in the material in order to get the effect to show. I don't remember having to do that before.

[Library Effect]
Lifetime=5
Version=2.00
Radius=-1
Priority=0

[Properties]
Cockpit=1
VirtualCockpit=1
Spot=1
Tower=1
Map=1

[Emitter.0]
Lifetime=0.50, 0.50
Delay=0.00, 0.00
Bounce=0.00
Light=1
No Interpolate=1
Rate=1.00, 1.00
X Emitter Velocity=0.00, 0.00
Y Emitter Velocity=0.00, 0.00
Z Emitter Velocity=0.00, 0.00
Drag=0.00, 0.00
X Particle Velocity=0.00, 0.00
Y Particle Velocity=0.00, 0.00
Z Particle Velocity=0.00, 0.00
X Rotation=0.00, 0.00
Y Rotation=0.00, 0.00
Z Rotation=0.00, 0.00
X Offset=0.00, 0.00
Y Offset=0.00, 0.00
Z Offset=0.00, 0.00
Pitch=0.00, 0.00
Bank=0.00, 0.00
Heading=0.00, 0.00

[Particle.0]
Lifetime=0.00, 0.00
Type=25
X Scale=0.5, 0.5
Y Scale=0.5, 0.5
Z Scale=0.0, 0.0
X Scale Rate=0.00, 0.00
Y Scale Rate=0.00, 0.00
Z Scale Rate=0.00, 0.00
Drag=0.00, 0.00
Color Rate=0.00, 0.00
X Offset=0.00, 0.00
Y Offset=0.00, 0.00
Z Offset=0.00, 0.00
Fade In=0.00, 0.00
Fade Out=0.00, 0.00
Rotation=0.00, 0.00
Static=1
Face=1, 1, 1

[ParticleAttributes.0]
Blend Mode=2
Texture=fx_2.bmp
Bounce=0.00
Color Start=50,50,50,255
Color End=50,50,50,0
Jitter Distance=0.00
Jitter Time=0.00
uv1=0.00, 0.00
uv2=0.01, 0.01
X Scale Goal=0.00
Y Scale Goal=0.00
Z Scale Goal=0.00
Extrude Length=0.00
Extrude Pitch Max=0.00
Extrude Heading Max=0.00
 
Top