- Messages
- 55
- Country
Is there a way of making a one way only taxi way, so that you can only enter from one end?
Thanks
Steve
Thanks
Steve
-
Which the release of FS2020 we see an explosition of activity on the forun and of course we are very happy to see this. But having all questions about FS2020 in one forum becomes a bit messy. So therefore we would like to ask you all to use the following guidelines when posting your questions:
- Tag FS2020 specific questions with the MSFS2020 tag.
- Questions about making 3D assets can be posted in the 3D asset design forum. Either post them in the subforum of the modelling tool you use or in the general forum if they are general.
- Questions about aircraft design can be posted in the Aircraft design forum
- Questions about airport design can be posted in the FS2020 airport design forum. Once airport development tools have been updated for FS2020 you can post tool speciifc questions in the subforums of those tools as well of course.
- Questions about terrain design can be posted in the FS2020 terrain design forum.
- Questions about SimConnect can be posted in the SimConnect forum.
Any other question that is not specific to an aspect of development or tool can be posted in the General chat forum.
By following these guidelines we make sure that the forums remain easy to read for everybody and also that the right people can find your post to answer it.
FSX No Entry Taxiway
- Thread starter Steve Harding
- Start date
Not really Steve, if both ends are connected to a taxiway system then both ends will get used, you ask enter to where?
But!! with tricky stuff you can, but may be severely restricted
lets say you have 2 parking spots, A and B, A is connected "only" to the runway ends so will use one way to the runway for take off
what you now need is an exit connected to A or B, one way for landing, so you now need to break the runway black line near each of the start so they cannot get to A if required, so B will not obviously be able to take off
of course if they run over the break in the black line then they're going to use A two way
I seem to remember doing something like this for someone 10yrs ago at a small island airport whether my memory is correct on what i did here i don't know, cant remember
George or Tom have greater experience with the plumbing method than myself here and add something i'm missing...............
But!! with tricky stuff you can, but may be severely restricted
lets say you have 2 parking spots, A and B, A is connected "only" to the runway ends so will use one way to the runway for take off
what you now need is an exit connected to A or B, one way for landing, so you now need to break the runway black line near each of the start so they cannot get to A if required, so B will not obviously be able to take off
of course if they run over the break in the black line then they're going to use A two way
I seem to remember doing something like this for someone 10yrs ago at a small island airport whether my memory is correct on what i did here i don't know, cant remember
George or Tom have greater experience with the plumbing method than myself here and add something i'm missing...............
Last edited: