• Which the release of FS2020 we see an explosition of activity on the forun and of course we are very happy to see this. But having all questions about FS2020 in one forum becomes a bit messy. So therefore we would like to ask you all to use the following guidelines when posting your questions:

    • Tag FS2020 specific questions with the MSFS2020 tag.
    • Questions about making 3D assets can be posted in the 3D asset design forum. Either post them in the subforum of the modelling tool you use or in the general forum if they are general.
    • Questions about aircraft design can be posted in the Aircraft design forum
    • Questions about airport design can be posted in the FS2020 airport design forum. Once airport development tools have been updated for FS2020 you can post tool speciifc questions in the subforums of those tools as well of course.
    • Questions about terrain design can be posted in the FS2020 terrain design forum.
    • Questions about SimConnect can be posted in the SimConnect forum.

    Any other question that is not specific to an aspect of development or tool can be posted in the General chat forum.

    By following these guidelines we make sure that the forums remain easy to read for everybody and also that the right people can find your post to answer it.

MSFS Well...It WAS working

Messages
259
Country
ca-ontario
ADE was compiling, but then as I added more stuff, it started throwing up errors. Attached is the output, it seems not to like the REGION, but I can't insert anything into the properties box. I added a VOR which also required an ID, but I deleted it in an effort to troubleshoot this. So now the package is about back to where it was when it was working, but it still gives this error.


project XML: C:\Users\Owner\Documents\ade\work_20\khpf_v0.01\khpf_v0.01.xml
temp dir: C:\Users\Owner\Documents\ade\work_20\khpf_v0.01\_PackageInt
output dir: C:\Users\Owner\Documents\ade\work_20\khpf_v0.01\.
PackageBuilder | Reading C:\Users\Owner\Documents\ade\work_20\khpf_v0.01\khpf_v0.01.xml...
PackageBuilder | Preparing asset groups...
PackageBuilder | Done, 3 asset groups registered.
PackageBuilder | Generating commands for package khpf-he production facility...
PackageBuilder | Preparing commands for asset group khpf-airport...
PackageBuilder | Preparing commands for asset group khpf-models...
PackageBuilder | Ready, 5 commands added.
PackageBuilder | Starting the build...
PackageBuilder | Build package khpf-he production facility ...
PackageBuilder | Building assets for the package khpf-he production facility...
Copying files from source folder C:\Users\Owner\Documents\ade\work_20\khpf_v0.01\PackageSources\-khpf-he production facility-modelLib\...
Compiling BGL file from in-memory data to output file -khpf-he production facility-modelLib.BGL...
Copying files from source folder C:\Users\Owner\Documents\ade\work_20\khpf_v0.01\PackageSources\-khpf-he production facility-modelLib\...
Compiling BGL from file khpf-airport.xml...
INTERNAL COMPILER ERROR: #C2613: Empty REGION tag.
INTERNAL COMPILER ERROR: #C2031: Failed element parse <Approach>
INTERNAL COMPILER ERROR: #C2032: XML Parse Error! Element tree follows:
ERROR: <FSData
ERROR: version = 9.0
ERROR: >
ERROR: <Airport
ERROR: country = United States
ERROR: state = Maine
ERROR: city = South Bangor
ERROR: name = HE Prod Facility
ERROR: lat = 44.518000335
ERROR: lon = -68.729000241
ERROR: alt = 101.998F
ERROR: magvar = 20
ERROR: trafficScalar = 0.7
ERROR: airportTestRadius = 16404.2F
ERROR: altType = GEOID
ERROR: isOnTIN = FALSE
ERROR: onlyAddIfReplace = FALSE
ERROR: applyFlatten = FALSE
ERROR: starAirport = FALSE
ERROR: closed = FALSE
ERROR: groundMergingTransfertBright = 0
ERROR: groundMergingTransfertDark = 0
ERROR: ident = KHPF
ERROR: >
ERROR: <Approach
ERROR: type = ILS
ERROR: runway = 02
ERROR: designator = NONE
ERROR: suffix = 0
ERROR: gpsOverlay = FALSE
ERROR: fixType = TERMINAL_WAYPOINT
ERROR: fixRegion =
ERROR: fixIdent = FF02N
ERROR: altitude = 2200.0F
ERROR: heading = 0
ERROR: missedAltitude = 3200.0F
ERROR: >
ERROR:
INTERNAL COMPILER ERROR: #C2613: Empty REGION tag.
INTERNAL COMPILER ERROR: #C2031: Failed element parse <Leg>
INTERNAL COMPILER ERROR: #C2032: XML Parse Error! Element tree follows:
ERROR: <FSData
ERROR: version = 9.0
ERROR: >
ERROR: <Airport
ERROR: country = United States
ERROR: state = Maine
ERROR: city = South Bangor
ERROR: name = HE Prod Facility
ERROR: lat = 44.518000335
ERROR: lon = -68.729000241
ERROR: alt = 101.998F
ERROR: magvar = 20
ERROR: trafficScalar = 0.7
ERROR: airportTestRadius = 16404.2F
ERROR: altType = GEOID
ERROR: isOnTIN = FALSE
ERROR: onlyAddIfReplace = FALSE
ERROR: applyFlatten = FALSE
ERROR: starAirport = FALSE
ERROR: closed = FALSE
ERROR: groundMergingTransfertBright = 0
ERROR: groundMergingTransfertDark = 0
ERROR: ident = KHPF
ERROR: >
ERROR: <Approach
ERROR: type = ILS
ERROR: runway = 02
ERROR: designator = NONE
ERROR: suffix = 0
ERROR: gpsOverlay = FALSE
ERROR: fixType = TERMINAL_WAYPOINT
ERROR: fixRegion =
ERROR: fixIdent = FF02N
ERROR: altitude = 2200.0F
ERROR: heading = 0
ERROR: missedAltitude = 3200.0F
ERROR: >
ERROR: <ApproachLegs
ERROR: >
ERROR: <Leg
ERROR: type = IF
ERROR: fixType = TERMINAL_WAYPOINT
ERROR: fixRegion =
ERROR: fixIdent = IF02N
ERROR: altitudeDescriptor = +
ERROR: altitude1 = 2200.0F
ERROR: >
ERROR:
INTERNAL COMPILER ERROR: #C2613: Empty REGION tag.
INTERNAL COMPILER ERROR: #C2031: Failed element parse <Leg>
INTERNAL COMPILER ERROR: #C2032: XML Parse Error! Element tree follows:
ERROR: <FSData
ERROR: version = 9.0
ERROR: >
ERROR: <Airport
ERROR: country = United States
ERROR: state = Maine
ERROR: city = South Bangor
ERROR: name = HE Prod Facility
ERROR: lat = 44.518000335
ERROR: lon = -68.729000241
ERROR: alt = 101.998F
ERROR: magvar = 20
ERROR: trafficScalar = 0.7
ERROR: airportTestRadius = 16404.2F
ERROR: altType = GEOID
ERROR: isOnTIN = FALSE
ERROR: onlyAddIfReplace = FALSE
ERROR: applyFlatten = FALSE
ERROR: starAirport = FALSE
ERROR: closed = FALSE
ERROR: groundMergingTransfertBright = 0
ERROR: groundMergingTransfertDark = 0
ERROR: ident = KHPF
ERROR: >
ERROR: <Approach
ERROR: type = ILS
ERROR: runway = 02
ERROR: designator = NONE
ERROR: suffix = 0
ERROR: gpsOverlay = FALSE
ERROR: fixType = TERMINAL_WAYPOINT
ERROR: fixRegion =
ERROR: fixIdent = FF02N
ERROR: altitude = 2200.0F
ERROR: heading = 0
ERROR: missedAltitude = 3200.0F
ERROR: >
ERROR: <ApproachLegs
ERROR: >
ERROR: <Leg
ERROR: type = CF
ERROR: fixType = TERMINAL_WAYPOINT
ERROR: fixRegion =
ERROR: fixIdent = FF02N
ERROR: flyOver = FALSE
ERROR: theta = 0
ERROR: rho = 0.0N
ERROR: magneticCourse = 360
ERROR: distance = 4.0N
ERROR: altitudeDescriptor = +
ERROR: altitude1 = 2200.0F
ERROR: >
ERROR:
INTERNAL COMPILER ERROR: #C2613: Empty REGION tag.
INTERNAL COMPILER ERROR: #C2031: Failed element parse <Leg>
INTERNAL COMPILER ERROR: #C2032: XML Parse Error! Element tree follows:
ERROR: <FSData
ERROR: version = 9.0
ERROR: >
ERROR: <Airport
ERROR: country = United States
ERROR: state = Maine
ERROR: city = South Bangor
ERROR: name = HE Prod Facility
ERROR: lat = 44.518000335
ERROR: lon = -68.729000241
ERROR: alt = 101.998F
ERROR: magvar = 20
ERROR: trafficScalar = 0.7
ERROR: airportTestRadius = 16404.2F
ERROR: altType = GEOID
ERROR: isOnTIN = FALSE
ERROR: onlyAddIfReplace = FALSE
ERROR: applyFlatten = FALSE
ERROR: starAirport = FALSE
ERROR: closed = FALSE
ERROR: groundMergingTransfertBright = 0
ERROR: groundMergingTransfertDark = 0
ERROR: ident = KHPF
ERROR: >
ERROR: <Approach
ERROR: type = ILS
ERROR: runway = 02
ERROR: designator = NONE
ERROR: suffix = 0
ERROR: gpsOverlay = FALSE
ERROR: fixType = TERMINAL_WAYPOINT
ERROR: fixRegion =
ERROR: fixIdent = FF02N
ERROR: altitude = 2200.0F
ERROR: heading = 0
ERROR: missedAltitude = 3200.0F
ERROR: >
ERROR: <ApproachLegs
ERROR: >
ERROR: <Leg
ERROR: type = CF
ERROR: fixType = RUNWAY
ERROR: fixRegion =
ERROR: fixIdent = RW02
ERROR: flyOver = FALSE
ERROR: theta = 0
ERROR: rho = 0.0N
ERROR: magneticCourse = 360
ERROR: distance = 6.0N
ERROR: altitudeDescriptor = A
ERROR: altitude1 = 151.998F
ERROR: >
ERROR:
INTERNAL COMPILER ERROR: #C2613: Empty REGION tag.
INTERNAL COMPILER ERROR: #C2031: Failed element parse <Leg>
INTERNAL COMPILER ERROR: #C2032: XML Parse Error! Element tree follows:
ERROR: <FSData
ERROR: version = 9.0
ERROR: >
ERROR: <Airport
ERROR: country = United States
ERROR: state = Maine
ERROR: city = South Bangor
ERROR: name = HE Prod Facility
ERROR: lat = 44.518000335
ERROR: lon = -68.729000241
ERROR: alt = 101.998F
ERROR: magvar = 20
ERROR: trafficScalar = 0.7
ERROR: airportTestRadius = 16404.2F
ERROR: altType = GEOID
ERROR: isOnTIN = FALSE
ERROR: onlyAddIfReplace = FALSE
ERROR: applyFlatten = FALSE
ERROR: starAirport = FALSE
ERROR: closed = FALSE
ERROR: groundMergingTransfertBright = 0
ERROR: groundMergingTransfertDark = 0
ERROR: ident = KHPF
ERROR: >
ERROR: <Approach
ERROR: type = ILS
ERROR: runway = 02
ERROR: designator = NONE
ERROR: suffix = 0
ERROR: gpsOverlay = FALSE
ERROR: fixType = TERMINAL_WAYPOINT
ERROR: fixRegion =
ERROR: fixIdent = FF02N
ERROR: altitude = 2200.0F
ERROR: heading = 0
ERROR: missedAltitude = 3200.0F
ERROR: >
ERROR: <MissedApproachLegs
ERROR: >
ERROR: <Leg
ERROR: type = CF
ERROR: fixType = TERMINAL_WAYPOINT
ERROR: fixRegion =
ERROR: fixIdent = HH02N
ERROR: flyOver = FALSE
ERROR: theta = 0
ERROR: rho = 0.0N
ERROR: magneticCourse = 360
ERROR: distance = 10.0N
ERROR: >
ERROR:
INTERNAL COMPILER ERROR: #C2613: Empty REGION tag.
INTERNAL COMPILER ERROR: #C2031: Failed element parse <Leg>
INTERNAL COMPILER ERROR: #C2032: XML Parse Error! Element tree follows:
ERROR: <FSData
ERROR: version = 9.0
ERROR: >
ERROR: <Airport
ERROR: country = United States
ERROR: state = Maine
ERROR: city = South Bangor
ERROR: name = HE Prod Facility
ERROR: lat = 44.518000335
ERROR: lon = -68.729000241
ERROR: alt = 101.998F
ERROR: magvar = 20
ERROR: trafficScalar = 0.7
ERROR: airportTestRadius = 16404.2F
ERROR: altType = GEOID
ERROR: isOnTIN = FALSE
ERROR: onlyAddIfReplace = FALSE
ERROR: applyFlatten = FALSE
ERROR: starAirport = FALSE
ERROR: closed = FALSE
ERROR: groundMergingTransfertBright = 0
ERROR: groundMergingTransfertDark = 0
ERROR: ident = KHPF
ERROR: >
ERROR: <Approach
ERROR: type = ILS
ERROR: runway = 02
ERROR: designator = NONE
ERROR: suffix = 0
ERROR: gpsOverlay = FALSE
ERROR: fixType = TERMINAL_WAYPOINT
ERROR: fixRegion =
ERROR: fixIdent = FF02N
ERROR: altitude = 2200.0F
ERROR: heading = 0
ERROR: missedAltitude = 3200.0F
ERROR: >
ERROR: <MissedApproachLegs
ERROR: >
ERROR: <Leg
ERROR: type = HM
ERROR: fixType = TERMINAL_WAYPOINT
ERROR: fixRegion =
ERROR: fixIdent = HH02N
ERROR: turnDirection = R
ERROR: magneticCourse = 360
ERROR: time = 1
ERROR: >
ERROR:
INTERNAL COMPILER ERROR: #C2378: WayPoint keyword MUST have all the following: WayPointType, WayPointRegion, WayPointIdent, Lat and Lon!
INTERNAL COMPILER ERROR: #C2031: Failed element parse <Waypoint>
INTERNAL COMPILER ERROR: #C2032: XML Parse Error! Element tree follows:
ERROR: <FSData
ERROR: version = 9.0
ERROR: >
ERROR: <Airport
ERROR: country = United States
ERROR: state = Maine
ERROR: city = South Bangor
ERROR: name = HE Prod Facility
ERROR: lat = 44.518000335
ERROR: lon = -68.729000241
ERROR: alt = 101.998F
ERROR: magvar = 20
ERROR: trafficScalar = 0.7
ERROR: airportTestRadius = 16404.2F
ERROR: altType = GEOID
ERROR: isOnTIN = FALSE
ERROR: onlyAddIfReplace = FALSE
ERROR: applyFlatten = FALSE
ERROR: starAirport = FALSE
ERROR: closed = FALSE
ERROR: groundMergingTransfertBright = 0
ERROR: groundMergingTransfertDark = 0
ERROR: ident = KHPF
ERROR: >
ERROR: <Waypoint
ERROR: lat = 44.3376185149692
ERROR: lon = -68.7290166666667
ERROR: waypointType = UNNAMED
ERROR: magvar = 0
ERROR: waypointIdent = IF02N
ERROR: >
ERROR:
INTERNAL COMPILER ERROR: #C2378: WayPoint keyword MUST have all the following: WayPointType, WayPointRegion, WayPointIdent, Lat and Lon!
INTERNAL COMPILER ERROR: #C2031: Failed element parse <Waypoint>
INTERNAL COMPILER ERROR: #C2032: XML Parse Error! Element tree follows:
ERROR: <FSData
ERROR: version = 9.0
ERROR: >
ERROR: <Airport
ERROR: country = United States
ERROR: state = Maine
ERROR: city = South Bangor
ERROR: name = HE Prod Facility
ERROR: lat = 44.518000335
ERROR: lon = -68.729000241
ERROR: alt = 101.998F
ERROR: magvar = 20
ERROR: trafficScalar = 0.7
ERROR: airportTestRadius = 16404.2F
ERROR: altType = GEOID
ERROR: isOnTIN = FALSE
ERROR: onlyAddIfReplace = FALSE
ERROR: applyFlatten = FALSE
ERROR: starAirport = FALSE
ERROR: closed = FALSE
ERROR: groundMergingTransfertBright = 0
ERROR: groundMergingTransfertDark = 0
ERROR: ident = KHPF
ERROR: >
ERROR: <Waypoint
ERROR: lat = 44.4042851504266
ERROR: lon = -68.7290166666667
ERROR: waypointType = UNNAMED
ERROR: magvar = 0
ERROR: waypointIdent = FF02N
ERROR: >
ERROR:
INTERNAL COMPILER ERROR: #C2378: WayPoint keyword MUST have all the following: WayPointType, WayPointRegion, WayPointIdent, Lat and Lon!
INTERNAL COMPILER ERROR: #C2031: Failed element parse <Waypoint>
INTERNAL COMPILER ERROR: #C2032: XML Parse Error! Element tree follows:
ERROR: <FSData
ERROR: version = 9.0
ERROR: >
ERROR: <Airport
ERROR: country = United States
ERROR: state = Maine
ERROR: city = South Bangor
ERROR: name = HE Prod Facility
ERROR: lat = 44.518000335
ERROR: lon = -68.729000241
ERROR: alt = 101.998F
ERROR: magvar = 20
ERROR: trafficScalar = 0.7
ERROR: airportTestRadius = 16404.2F
ERROR: altType = GEOID
ERROR: isOnTIN = FALSE
ERROR: onlyAddIfReplace = FALSE
ERROR: applyFlatten = FALSE
ERROR: starAirport = FALSE
ERROR: closed = FALSE
ERROR: groundMergingTransfertBright = 0
ERROR: groundMergingTransfertDark = 0
ERROR: ident = KHPF
ERROR: >
ERROR: <Waypoint
ERROR: lat = 44.6983814850308
ERROR: lon = -68.7290166666667
ERROR: waypointType = UNNAMED
ERROR: magvar = 0
ERROR: waypointIdent = HH02N
ERROR: >
ERROR:
INTERNAL COMPILER ERROR: #C2607: Compilation errors detected, compilation failed!
INTERNAL COMPILER ERROR: #C2006: Parse failed (0x 0)
PackageBuilder | Output path does not exist: C:\Users\Owner\Documents\ade\work_20\khpf_v0.01\Packages\khpf-he production facility\scenery\world\scenery\khpf-airport.bgl
Compiling 1 SHP -> BGL (file KHPF.shp )...
PackageBuilder | Skip mirroring due to command failures.
PackageBuilder | Skip generation of package information due to command failures.
PackageBuilder | Validating Package 'khpf-he production facility'...
[Package Validation] 'khpf-he production facility' - Warning: Invalid Package Name 'khpf-he production facility', package name should be in the form 'aaa-bbb-...-xxx' and only contain lower case letters or digits
[Manifest Validation] 'khpf-he production facility' - Error: Missing or invalid Manifest file 'C:\Users\Owner\Documents\ade\work_20\khpf_v0.01\Packages\khpf-he production facility\manifest.json'
[Layout Validation] khpf-he production facility'- Error: Missing or invalid Layout file 'C:\Users\Owner\Documents\ade\work_20\khpf_v0.01\Packages\khpf-he production facility\layout.json'
Package Validation failed for 'Packages'
PackageBuilder | Finished, 0 skipped, 4 done and 2 failed, took 0s368ms.
Press any key to continue . . .
 
Messages
176
Country
germany
Hey there is the fixRegion=".." missing or the waypointregio=".." which takes the role of regionalization f the 5 letter codes of the waypoints. If you like to use existing waypoint, you need to know in which region it's located. If you like to define new ones, you need to use a region starting with an "X." (just found this out today) example:
<Waypoint lat="53.695489" lon="10.535583" waypointType="NAMED" magvar="0.00000" waypointRegion="X1" waypointIdent="TH221"/>
When you define waypoints thsis way, you can select them in the flight plan section during startup (airport selection).
Regards Guido
 
Messages
176
Country
germany
Could U pls send the xml file as a zip? I had also issues around <ils> inside <runway> but I cannot see your trial here as not all lines are displayed.
 
Messages
219
Country
unitedstates
ADE was compiling, but then as I added more stuff, it started throwing up errors. Attached is the output, it seems not to like the REGION, but I can't insert anything into the properties box. I added a VOR which also required an ID, but I deleted it in an effort to troubleshoot this. So now the package is about back to where it was when it was working, but it still gives this error.


project XML: C:\Users\Owner\Documents\ade\work_20\khpf_v0.01\khpf_v0.01.xml
temp dir: C:\Users\Owner\Documents\ade\work_20\khpf_v0.01\_PackageInt
output dir: C:\Users\Owner\Documents\ade\work_20\khpf_v0.01\.
PackageBuilder | Reading C:\Users\Owner\Documents\ade\work_20\khpf_v0.01\khpf_v0.01.xml...
PackageBuilder | Preparing asset groups...
PackageBuilder | Done, 3 asset groups registered.
PackageBuilder | Generating commands for package khpf-he production facility...
PackageBuilder | Preparing commands for asset group khpf-airport...
PackageBuilder | Preparing commands for asset group khpf-models...
PackageBuilder | Ready, 5 commands added.
PackageBuilder | Starting the build...
PackageBuilder | Build package khpf-he production facility ...
PackageBuilder | Building assets for the package khpf-he production facility...
Copying files from source folder C:\Users\Owner\Documents\ade\work_20\khpf_v0.01\PackageSources\-khpf-he production facility-modelLib\...
Compiling BGL file from in-memory data to output file -khpf-he production facility-modelLib.BGL...
Copying files from source folder C:\Users\Owner\Documents\ade\work_20\khpf_v0.01\PackageSources\-khpf-he production facility-modelLib\...
Compiling BGL from file khpf-airport.xml...
INTERNAL COMPILER ERROR: #C2613: Empty REGION tag.
INTERNAL COMPILER ERROR: #C2031: Failed element parse <Approach>
INTERNAL COMPILER ERROR: #C2032: XML Parse Error! Element tree follows:
ERROR: <FSData
ERROR: version = 9.0
ERROR: >
ERROR: <Airport
ERROR: country = United States
ERROR: state = Maine
ERROR: city = South Bangor
ERROR: name = HE Prod Facility
ERROR: lat = 44.518000335
ERROR: lon = -68.729000241
ERROR: alt = 101.998F
ERROR: magvar = 20
ERROR: trafficScalar = 0.7
ERROR: airportTestRadius = 16404.2F
ERROR: altType = GEOID
ERROR: isOnTIN = FALSE
ERROR: onlyAddIfReplace = FALSE
ERROR: applyFlatten = FALSE
ERROR: starAirport = FALSE
ERROR: closed = FALSE
ERROR: groundMergingTransfertBright = 0
ERROR: groundMergingTransfertDark = 0
ERROR: ident = KHPF
ERROR: >
ERROR: <Approach
ERROR: type = ILS
ERROR: runway = 02
ERROR: designator = NONE
ERROR: suffix = 0
ERROR: gpsOverlay = FALSE
ERROR: fixType = TERMINAL_WAYPOINT
ERROR: fixRegion =
ERROR: fixIdent = FF02N
ERROR: altitude = 2200.0F
ERROR: heading = 0
ERROR: missedAltitude = 3200.0F
ERROR: >
ERROR:
INTERNAL COMPILER ERROR: #C2613: Empty REGION tag.
INTERNAL COMPILER ERROR: #C2031: Failed element parse <Leg>
INTERNAL COMPILER ERROR: #C2032: XML Parse Error! Element tree follows:
ERROR: <FSData
ERROR: version = 9.0
ERROR: >
ERROR: <Airport
ERROR: country = United States
ERROR: state = Maine
ERROR: city = South Bangor
ERROR: name = HE Prod Facility
ERROR: lat = 44.518000335
ERROR: lon = -68.729000241
ERROR: alt = 101.998F
ERROR: magvar = 20
ERROR: trafficScalar = 0.7
ERROR: airportTestRadius = 16404.2F
ERROR: altType = GEOID
ERROR: isOnTIN = FALSE
ERROR: onlyAddIfReplace = FALSE
ERROR: applyFlatten = FALSE
ERROR: starAirport = FALSE
ERROR: closed = FALSE
ERROR: groundMergingTransfertBright = 0
ERROR: groundMergingTransfertDark = 0
ERROR: ident = KHPF
ERROR: >
ERROR: <Approach
ERROR: type = ILS
ERROR: runway = 02
ERROR: designator = NONE
ERROR: suffix = 0
ERROR: gpsOverlay = FALSE
ERROR: fixType = TERMINAL_WAYPOINT
ERROR: fixRegion =
ERROR: fixIdent = FF02N
ERROR: altitude = 2200.0F
ERROR: heading = 0
ERROR: missedAltitude = 3200.0F
ERROR: >
ERROR: <ApproachLegs
ERROR: >
ERROR: <Leg
ERROR: type = IF
ERROR: fixType = TERMINAL_WAYPOINT
ERROR: fixRegion =
ERROR: fixIdent = IF02N
ERROR: altitudeDescriptor = +
ERROR: altitude1 = 2200.0F
ERROR: >
ERROR:
INTERNAL COMPILER ERROR: #C2613: Empty REGION tag.
INTERNAL COMPILER ERROR: #C2031: Failed element parse <Leg>
INTERNAL COMPILER ERROR: #C2032: XML Parse Error! Element tree follows:
ERROR: <FSData
ERROR: version = 9.0
ERROR: >
ERROR: <Airport
ERROR: country = United States
ERROR: state = Maine
ERROR: city = South Bangor
ERROR: name = HE Prod Facility
ERROR: lat = 44.518000335
ERROR: lon = -68.729000241
ERROR: alt = 101.998F
ERROR: magvar = 20
ERROR: trafficScalar = 0.7
ERROR: airportTestRadius = 16404.2F
ERROR: altType = GEOID
ERROR: isOnTIN = FALSE
ERROR: onlyAddIfReplace = FALSE
ERROR: applyFlatten = FALSE
ERROR: starAirport = FALSE
ERROR: closed = FALSE
ERROR: groundMergingTransfertBright = 0
ERROR: groundMergingTransfertDark = 0
ERROR: ident = KHPF
ERROR: >
ERROR: <Approach
ERROR: type = ILS
ERROR: runway = 02
ERROR: designator = NONE
ERROR: suffix = 0
ERROR: gpsOverlay = FALSE
ERROR: fixType = TERMINAL_WAYPOINT
ERROR: fixRegion =
ERROR: fixIdent = FF02N
ERROR: altitude = 2200.0F
ERROR: heading = 0
ERROR: missedAltitude = 3200.0F
ERROR: >
ERROR: <ApproachLegs
ERROR: >
ERROR: <Leg
ERROR: type = CF
ERROR: fixType = TERMINAL_WAYPOINT
ERROR: fixRegion =
ERROR: fixIdent = FF02N
ERROR: flyOver = FALSE
ERROR: theta = 0
ERROR: rho = 0.0N
ERROR: magneticCourse = 360
ERROR: distance = 4.0N
ERROR: altitudeDescriptor = +
ERROR: altitude1 = 2200.0F
ERROR: >
ERROR:
INTERNAL COMPILER ERROR: #C2613: Empty REGION tag.
INTERNAL COMPILER ERROR: #C2031: Failed element parse <Leg>
INTERNAL COMPILER ERROR: #C2032: XML Parse Error! Element tree follows:
ERROR: <FSData
ERROR: version = 9.0
ERROR: >
ERROR: <Airport
ERROR: country = United States
ERROR: state = Maine
ERROR: city = South Bangor
ERROR: name = HE Prod Facility
ERROR: lat = 44.518000335
ERROR: lon = -68.729000241
ERROR: alt = 101.998F
ERROR: magvar = 20
ERROR: trafficScalar = 0.7
ERROR: airportTestRadius = 16404.2F
ERROR: altType = GEOID
ERROR: isOnTIN = FALSE
ERROR: onlyAddIfReplace = FALSE
ERROR: applyFlatten = FALSE
ERROR: starAirport = FALSE
ERROR: closed = FALSE
ERROR: groundMergingTransfertBright = 0
ERROR: groundMergingTransfertDark = 0
ERROR: ident = KHPF
ERROR: >
ERROR: <Approach
ERROR: type = ILS
ERROR: runway = 02
ERROR: designator = NONE
ERROR: suffix = 0
ERROR: gpsOverlay = FALSE
ERROR: fixType = TERMINAL_WAYPOINT
ERROR: fixRegion =
ERROR: fixIdent = FF02N
ERROR: altitude = 2200.0F
ERROR: heading = 0
ERROR: missedAltitude = 3200.0F
ERROR: >
ERROR: <ApproachLegs
ERROR: >
ERROR: <Leg
ERROR: type = CF
ERROR: fixType = RUNWAY
ERROR: fixRegion =
ERROR: fixIdent = RW02
ERROR: flyOver = FALSE
ERROR: theta = 0
ERROR: rho = 0.0N
ERROR: magneticCourse = 360
ERROR: distance = 6.0N
ERROR: altitudeDescriptor = A
ERROR: altitude1 = 151.998F
ERROR: >
ERROR:
INTERNAL COMPILER ERROR: #C2613: Empty REGION tag.
INTERNAL COMPILER ERROR: #C2031: Failed element parse <Leg>
INTERNAL COMPILER ERROR: #C2032: XML Parse Error! Element tree follows:
ERROR: <FSData
ERROR: version = 9.0
ERROR: >
ERROR: <Airport
ERROR: country = United States
ERROR: state = Maine
ERROR: city = South Bangor
ERROR: name = HE Prod Facility
ERROR: lat = 44.518000335
ERROR: lon = -68.729000241
ERROR: alt = 101.998F
ERROR: magvar = 20
ERROR: trafficScalar = 0.7
ERROR: airportTestRadius = 16404.2F
ERROR: altType = GEOID
ERROR: isOnTIN = FALSE
ERROR: onlyAddIfReplace = FALSE
ERROR: applyFlatten = FALSE
ERROR: starAirport = FALSE
ERROR: closed = FALSE
ERROR: groundMergingTransfertBright = 0
ERROR: groundMergingTransfertDark = 0
ERROR: ident = KHPF
ERROR: >
ERROR: <Approach
ERROR: type = ILS
ERROR: runway = 02
ERROR: designator = NONE
ERROR: suffix = 0
ERROR: gpsOverlay = FALSE
ERROR: fixType = TERMINAL_WAYPOINT
ERROR: fixRegion =
ERROR: fixIdent = FF02N
ERROR: altitude = 2200.0F
ERROR: heading = 0
ERROR: missedAltitude = 3200.0F
ERROR: >
ERROR: <MissedApproachLegs
ERROR: >
ERROR: <Leg
ERROR: type = CF
ERROR: fixType = TERMINAL_WAYPOINT
ERROR: fixRegion =
ERROR: fixIdent = HH02N
ERROR: flyOver = FALSE
ERROR: theta = 0
ERROR: rho = 0.0N
ERROR: magneticCourse = 360
ERROR: distance = 10.0N
ERROR: >
ERROR:
INTERNAL COMPILER ERROR: #C2613: Empty REGION tag.
INTERNAL COMPILER ERROR: #C2031: Failed element parse <Leg>
INTERNAL COMPILER ERROR: #C2032: XML Parse Error! Element tree follows:
ERROR: <FSData
ERROR: version = 9.0
ERROR: >
ERROR: <Airport
ERROR: country = United States
ERROR: state = Maine
ERROR: city = South Bangor
ERROR: name = HE Prod Facility
ERROR: lat = 44.518000335
ERROR: lon = -68.729000241
ERROR: alt = 101.998F
ERROR: magvar = 20
ERROR: trafficScalar = 0.7
ERROR: airportTestRadius = 16404.2F
ERROR: altType = GEOID
ERROR: isOnTIN = FALSE
ERROR: onlyAddIfReplace = FALSE
ERROR: applyFlatten = FALSE
ERROR: starAirport = FALSE
ERROR: closed = FALSE
ERROR: groundMergingTransfertBright = 0
ERROR: groundMergingTransfertDark = 0
ERROR: ident = KHPF
ERROR: >
ERROR: <Approach
ERROR: type = ILS
ERROR: runway = 02
ERROR: designator = NONE
ERROR: suffix = 0
ERROR: gpsOverlay = FALSE
ERROR: fixType = TERMINAL_WAYPOINT
ERROR: fixRegion =
ERROR: fixIdent = FF02N
ERROR: altitude = 2200.0F
ERROR: heading = 0
ERROR: missedAltitude = 3200.0F
ERROR: >
ERROR: <MissedApproachLegs
ERROR: >
ERROR: <Leg
ERROR: type = HM
ERROR: fixType = TERMINAL_WAYPOINT
ERROR: fixRegion =
ERROR: fixIdent = HH02N
ERROR: turnDirection = R
ERROR: magneticCourse = 360
ERROR: time = 1
ERROR: >
ERROR:
INTERNAL COMPILER ERROR: #C2378: WayPoint keyword MUST have all the following: WayPointType, WayPointRegion, WayPointIdent, Lat and Lon!
INTERNAL COMPILER ERROR: #C2031: Failed element parse <Waypoint>
INTERNAL COMPILER ERROR: #C2032: XML Parse Error! Element tree follows:
ERROR: <FSData
ERROR: version = 9.0
ERROR: >
ERROR: <Airport
ERROR: country = United States
ERROR: state = Maine
ERROR: city = South Bangor
ERROR: name = HE Prod Facility
ERROR: lat = 44.518000335
ERROR: lon = -68.729000241
ERROR: alt = 101.998F
ERROR: magvar = 20
ERROR: trafficScalar = 0.7
ERROR: airportTestRadius = 16404.2F
ERROR: altType = GEOID
ERROR: isOnTIN = FALSE
ERROR: onlyAddIfReplace = FALSE
ERROR: applyFlatten = FALSE
ERROR: starAirport = FALSE
ERROR: closed = FALSE
ERROR: groundMergingTransfertBright = 0
ERROR: groundMergingTransfertDark = 0
ERROR: ident = KHPF
ERROR: >
ERROR: <Waypoint
ERROR: lat = 44.3376185149692
ERROR: lon = -68.7290166666667
ERROR: waypointType = UNNAMED
ERROR: magvar = 0
ERROR: waypointIdent = IF02N
ERROR: >
ERROR:
INTERNAL COMPILER ERROR: #C2378: WayPoint keyword MUST have all the following: WayPointType, WayPointRegion, WayPointIdent, Lat and Lon!
INTERNAL COMPILER ERROR: #C2031: Failed element parse <Waypoint>
INTERNAL COMPILER ERROR: #C2032: XML Parse Error! Element tree follows:
ERROR: <FSData
ERROR: version = 9.0
ERROR: >
ERROR: <Airport
ERROR: country = United States
ERROR: state = Maine
ERROR: city = South Bangor
ERROR: name = HE Prod Facility
ERROR: lat = 44.518000335
ERROR: lon = -68.729000241
ERROR: alt = 101.998F
ERROR: magvar = 20
ERROR: trafficScalar = 0.7
ERROR: airportTestRadius = 16404.2F
ERROR: altType = GEOID
ERROR: isOnTIN = FALSE
ERROR: onlyAddIfReplace = FALSE
ERROR: applyFlatten = FALSE
ERROR: starAirport = FALSE
ERROR: closed = FALSE
ERROR: groundMergingTransfertBright = 0
ERROR: groundMergingTransfertDark = 0
ERROR: ident = KHPF
ERROR: >
ERROR: <Waypoint
ERROR: lat = 44.4042851504266
ERROR: lon = -68.7290166666667
ERROR: waypointType = UNNAMED
ERROR: magvar = 0
ERROR: waypointIdent = FF02N
ERROR: >
ERROR:
INTERNAL COMPILER ERROR: #C2378: WayPoint keyword MUST have all the following: WayPointType, WayPointRegion, WayPointIdent, Lat and Lon!
INTERNAL COMPILER ERROR: #C2031: Failed element parse <Waypoint>
INTERNAL COMPILER ERROR: #C2032: XML Parse Error! Element tree follows:
ERROR: <FSData
ERROR: version = 9.0
ERROR: >
ERROR: <Airport
ERROR: country = United States
ERROR: state = Maine
ERROR: city = South Bangor
ERROR: name = HE Prod Facility
ERROR: lat = 44.518000335
ERROR: lon = -68.729000241
ERROR: alt = 101.998F
ERROR: magvar = 20
ERROR: trafficScalar = 0.7
ERROR: airportTestRadius = 16404.2F
ERROR: altType = GEOID
ERROR: isOnTIN = FALSE
ERROR: onlyAddIfReplace = FALSE
ERROR: applyFlatten = FALSE
ERROR: starAirport = FALSE
ERROR: closed = FALSE
ERROR: groundMergingTransfertBright = 0
ERROR: groundMergingTransfertDark = 0
ERROR: ident = KHPF
ERROR: >
ERROR: <Waypoint
ERROR: lat = 44.6983814850308
ERROR: lon = -68.7290166666667
ERROR: waypointType = UNNAMED
ERROR: magvar = 0
ERROR: waypointIdent = HH02N
ERROR: >
ERROR:
INTERNAL COMPILER ERROR: #C2607: Compilation errors detected, compilation failed!
INTERNAL COMPILER ERROR: #C2006: Parse failed (0x 0)
PackageBuilder | Output path does not exist: C:\Users\Owner\Documents\ade\work_20\khpf_v0.01\Packages\khpf-he production facility\scenery\world\scenery\khpf-airport.bgl
Compiling 1 SHP -> BGL (file KHPF.shp )...
PackageBuilder | Skip mirroring due to command failures.
PackageBuilder | Skip generation of package information due to command failures.
PackageBuilder | Validating Package 'khpf-he production facility'...
[Package Validation] 'khpf-he production facility' - Warning: Invalid Package Name 'khpf-he production facility', package name should be in the form 'aaa-bbb-...-xxx' and only contain lower case letters or digits
[Manifest Validation] 'khpf-he production facility' - Error: Missing or invalid Manifest file 'C:\Users\Owner\Documents\ade\work_20\khpf_v0.01\Packages\khpf-he production facility\manifest.json'
[Layout Validation] khpf-he production facility'- Error: Missing or invalid Layout file 'C:\Users\Owner\Documents\ade\work_20\khpf_v0.01\Packages\khpf-he production facility\layout.json'
Package Validation failed for 'Packages'
PackageBuilder | Finished, 0 skipped, 4 done and 2 failed, took 0s368ms.
Press any key to continue . . .
Yep Same here i tried adding an ILS to 4wi9 in Wisconsin, US
 

scruffyduck

Administrator
Staff member
FSDevConf team
Resource contributor
Messages
33,822
Country
unitedkingdom
OK - the bottom line is that ADE 2020 may not be working for navaids and approach code. It is untested and I assume that this project was created from something other than a base airport (as I mention ADE does not load navaids and approaches) If you are adding naviads or approaches then your testing is showing they generate errors.
 
Messages
176
Country
germany
Hi Jon, I assume you are one of the more experienced guys here and that's important. But what I realialized is a little different because as an IT expert my experience was telling me to use a kind of flexibility, in standard software develpment environments it's called user exits. In terms of navaids it's a region starting with the letter 'X'. In this case, I was able to add my personal nacaids to MSFS and use it in flight plans and it worked even on my personal, fully fictional handmade airport close to Hamburg. Everything is working: ils, waypoints, coms, and the rest - I'm working on it. Unless it is not fully described anywhere - and that's also a question - I use try and error to reach to a full working virtual airport with arrival, approach and departure procedures. The date are not loaded in little navmap but I'm shure it's only because of this undocumented feature. I hope You also have some informations about this in the still pretty unstable MSFS framework. Regards Guido
 

scruffyduck

Administrator
Staff member
FSDevConf team
Resource contributor
Messages
33,822
Country
unitedkingdom
Thanks Guido - that is very interesting
 
Top