• Which the release of FS2020 we see an explosition of activity on the forun and of course we are very happy to see this. But having all questions about FS2020 in one forum becomes a bit messy. So therefore we would like to ask you all to use the following guidelines when posting your questions:

    • Tag FS2020 specific questions with the MSFS2020 tag.
    • Questions about making 3D assets can be posted in the 3D asset design forum. Either post them in the subforum of the modelling tool you use or in the general forum if they are general.
    • Questions about aircraft design can be posted in the Aircraft design forum
    • Questions about airport design can be posted in the FS2020 airport design forum. Once airport development tools have been updated for FS2020 you can post tool speciifc questions in the subforums of those tools as well of course.
    • Questions about terrain design can be posted in the FS2020 terrain design forum.
    • Questions about SimConnect can be posted in the SimConnect forum.

    Any other question that is not specific to an aspect of development or tool can be posted in the General chat forum.

    By following these guidelines we make sure that the forums remain easy to read for everybody and also that the right people can find your post to answer it.

Creating simple 3D object by selecting texture faces

Messages
402
Hi,

I do not know if this is possible in a known 3D software but let's say I have prepared many texture/images and on it I have placed the front, side and roof of buildings extracted from real photos.

Now is it possible in a known 3D program to load the texture (bitmap) and by making for example a selection in the bitmap around the front part of the building, the 3D cube created, would adjust its selected face proportions to match the prorportions of the texture front part and allow the texture to be maped on it without distortions? Same for the side and roof?

I do not know if this is science fiction or if it exists. It would make my life easier to create a big set of buildings and be able to have the building sides prorportions match the variations of facades proportions in the textures

Cheers
MK
 
Hi,

You can do it with Google Sketchup. But you would have to position the relevant part of your texture bitmap for each face.
 
Thanks for the info I will try it in Sketchup.

I thought in Gmax there was some kind of option in the mapping but could not find any

Cheers
 
I probably don't fully understand what you're trying to do but in gmax if you use UVW map "planar" and then set the plane size to the number of feet your 1024 bmp should cover in both directions, you can drag the gizmo to texture your face much the same way it works in Sketchup without distorting the texture or needing any UVW unwrap. Trouble is, as with Sketchup, you'll need to do that for every face of the building. In gmax however, if you make every face of the building a seperate plane, you can drag the uvw map off the stack and onto another face to give it identical mapping.

Jim
 
Hi Jim,

Thanks for the info, actually if I over simplify what I am looking to do: I want to generate a 3D building from a texture :)

In the same way Google Building maker works with satellite isometric images, you select a facade and a roof and then the back side and you get a 3D building done in the same proportions of the selection you made and the selections are mapped on it

I thought a 3D program can do this but I think there is none

I look to make a big bunch of custom buildings for FS and the classic modeling method of Gmax is time consuming so I was looking for a Google Building maker equivalent option somewhere in a 3D program

Cheers!
 
Last edited:
If you're not looking for a lot of modelling detail, the Sketchup isn't that bad.

You already know your proportions/measurments from the textures - side, front, etc. so you create a box, slap the textures and you should be all right. For slanted roofs, almost the same thing.

This is not the simple "click on the textures and make the box" but it is a lot easier than mapping in gmax/etc.

One thing that I like to do from time to time is create sketchup objects from paper card models. (fiddlersgreen.net)

The images are already flat and proportioned. I create the polygons off the images, and then "fold" them into place.
 
Hi Felix,

I actualy use Sketchup now, I created the series of facades, sides and roofs in seperate textures and then by importing my facade texture as an image, I place it verticaly and extrude the box of the building from that image, then create a unique texture for the side and roof

This is the fastest method I found to date.

Your paper folding idea is interesting too :)

Cheers
 
Hi,

Google Building Maker might be quick, but often I feel the resulting buildings are not really nice. To use them in FS I think the textures would need a lot of rework, to make them better.

I am not sure if the output of Google Building Maker can be saved a COLLADA file, then they could be converted to FS. But since they heavily rely on the Google imagery you would probably not be allowed to use them.

SketchUp also has a way to model using a photo setup as reference. You can then just draw the shape of your building on this photo. It takes some time to set it up, but drawing the shape is quite easy then. I have explained this in my SketchUp tutorial. I should have a video of it as well, not sure if I ever uploaded that.

If you want really quick buildings in FS, I think using XML GenericBuildings or using autogen is probably quicker. Making a custom 3D model always takes more time, but they look much better as well of course.
 
Thanks for the feedback Arno, you are right about Building Maker, also the area I am designing building for (Beirut / Middle East) is not covered by the Building Maker areas.

The reason I want to design custom buildings is to create a structured and dense city that autogen does not create and also to make the buildings give the impression of the real ones. I am using real photos to create my various facades... With my custom buildings I will create libraries that I will use Whisplacer polygon filling to create the areas with variable densities and building types.

Also I got approval from many 3D modelers for Google Earth to use their landmark buildings in my scenery. these will be placed among the generic ones...

All in all, I am looking to make a city similar to the Fly Tampa Kai Tak (Hong Kong) with its custom and dense area.

Good luck for me :)
 
Last edited:
Back
Top