• Which the release of FS2020 we see an explosition of activity on the forun and of course we are very happy to see this. But having all questions about FS2020 in one forum becomes a bit messy. So therefore we would like to ask you all to use the following guidelines when posting your questions:

    • Tag FS2020 specific questions with the MSFS2020 tag.
    • Questions about making 3D assets can be posted in the 3D asset design forum. Either post them in the subforum of the modelling tool you use or in the general forum if they are general.
    • Questions about aircraft design can be posted in the Aircraft design forum
    • Questions about airport design can be posted in the FS2020 airport design forum. Once airport development tools have been updated for FS2020 you can post tool speciifc questions in the subforums of those tools as well of course.
    • Questions about terrain design can be posted in the FS2020 terrain design forum.
    • Questions about SimConnect can be posted in the SimConnect forum.

    Any other question that is not specific to an aspect of development or tool can be posted in the General chat forum.

    By following these guidelines we make sure that the forums remain easy to read for everybody and also that the right people can find your post to answer it.

FSXA Light issue

Vitus

Resource contributor
Messages
1,480
Country
newzealand
Hello again,

here's the next brain teaser for you. :teacher:

I can't get my vc light to light up my plane properly. It works fine on simple material with only a diffuse map assigned. But whenever the light shines on more complex material with spec map, bump, fresnel, reflection, it "overpowers" everything. Here are examples:

yL7rkhh.jpg

aWMYvZe.jpg


I tried so many things to fix this, but didn't get anywhere. Any ideas how to fix this?
 
Add a light map and set its blend mode to "[something] user controlled"?
 
I assigned a black texture (64x64) too the self-illuminating slot and set the blending mode to "additivenightonlyusercontrolled". Fired up FSX, nighttime, cockpit lights on and BAM! No change.
 
I wonder if your Normals are messed up. Thats what it looks like to me.

Try creating a box, save as editable Poly, scale down, hide behind the part (make copies of it for other parts to test with). Attach this part to your bigger part that has the issue. Rescale if its animated. Test in FS. This should reset all your Normals.

Nutshell:
* Create box
* Resize, reset scale
* Apply Material to it same as other parts material
* Select Other part (with Material issue)
* Turn on Attach, select Box, turn off Select
* Reset scale on part

Test...
 
fx lights tend to have this effect on bump map surfaces...
 
Nutshell:
* Create box
* Resize, reset scale
* Apply Material to it same as other parts material
* Select Other part (with Material issue)
* Turn on Attach, select Box, turn off Select
* Reset scale on part

Test...

I tried your approach, but no luck. But it's unlikely that it is a normal issue since I have multiple parts that are effected. The common thing those parts share is the material though.

fx lights tend to have this effect on bump map surfaces...
Yep, I'm pretty sure this is the issue. The problem goes away as soon s I remove the bum map.

So how to deal with this. I was hoping there's a different solution somewhere, but if not, I have to detach the affected parts and apply a new and simpler material to it. Meh.

I'm open for suggestions though. I'm still hopeful that there must be a way...
 
Why not simply remove the bumpmap from the existing material?

Or, clone the material to a new name, remove the bumpmap, then apply to selected objects...
 
Why not simply remove the bumpmap from the existing material?

Or, clone the material to a new name, remove the bumpmap, then apply to selected objects...

The parts in question are on the same map and using the same material as the fuselage. And I don't want to use the bumpmappinng of my fuselage. But I guess one approach would be the cloning and simplifying of the material for the interior model, rather than implementing a new texture set altogether. :idea:
 
I wonder if you have an odd setting in your Materials. Are you using multiple materials for these parts? IF so... You have some rogue settings in some of the Materials.

What I do is turn on Material Manager and flip down the material management page to a point, open the proper Material, flip down to the same point, and go back and fourth, comparing all settings and sliders, moving a section at a time, going to the other, moving down, checking, until I find the issue.

If that doesnt work, you can hold down Control key or bottom left key on Windows computers (I forget what it is) and drag out a copy of the Material (sphere on the Material Manager, drag it to an open square) and its cloned. Now rename it, put in a new Diffuse texture, continue if you have more parts/materials. Now your settings will be universal. Then see if this is happening. But this is only if you are using more then one Material. If you are using ONE Material with multiple parts, then those parts have an issue.

Maybe you could;
* Change them to a Editable Mesh, then rechange them to an Editable Poly
* Reset scale, then reset X-Form,
* Give them a different texture, then remap their UVW, then flip the texture back to the one you are using.
* Also........ You could pull out a copy of the Polygons of that part, and then detach them from the part. Them move the part to where the other one is and delete the first one, then check in FS.
 
Back
Top