• Which the release of FS2020 we see an explosition of activity on the forun and of course we are very happy to see this. But having all questions about FS2020 in one forum becomes a bit messy. So therefore we would like to ask you all to use the following guidelines when posting your questions:

    • Tag FS2020 specific questions with the MSFS2020 tag.
    • Questions about making 3D assets can be posted in the 3D asset design forum. Either post them in the subforum of the modelling tool you use or in the general forum if they are general.
    • Questions about aircraft design can be posted in the Aircraft design forum
    • Questions about airport design can be posted in the FS2020 airport design forum. Once airport development tools have been updated for FS2020 you can post tool speciifc questions in the subforums of those tools as well of course.
    • Questions about terrain design can be posted in the FS2020 terrain design forum.
    • Questions about SimConnect can be posted in the SimConnect forum.

    Any other question that is not specific to an aspect of development or tool can be posted in the General chat forum.

    By following these guidelines we make sure that the forums remain easy to read for everybody and also that the right people can find your post to answer it.

FSX model converter doesn't work

muffo

muffo

Messages
355
Country
italy
Today, I used modelconverter to add an effect on a object. But I made a mistake adding an empty object. By this moment the program doesn't work, when I try to add an attached object. This is the message that appear:
"System.Collections.Generic.KeyNotFoundException: La chiave specificata non era presente nel dizionario.
in System.ThrowHelper.ThrowKeyNotFoundException()
in System.Collections.Generic.Dictionary`2.get_Item(TKey key)
in ASToFra.ObjectRenderer.Renderer3DHandlerType.DrawModelPart(ModelPart mPart, RenderNodes renderNodes)
in ASToFra.ObjectRenderer.Renderer3DHandlerType.RenderSceneGraphNode(SceneGraphNode sn, RenderNodes renderNodes)
in ASToFra.ObjectRenderer.Renderer3DHandlerType.RenderSceneGraphNode(SceneGraphNode sn, RenderNodes renderNodes)
in ASToFra.ObjectRenderer.Renderer3DHandlerType.RenderShadows()
in ASToFra.ObjectRenderer.Renderer3DHandlerType.RenderScene()
in ASToFra.ObjectRenderer.Renderer3DHandlerType.Paint(Object sender, PaintEventArgs e)
in System.Windows.Forms.Control.OnPaint(PaintEventArgs e)
in GRV11.GRControl.OnPaint(PaintEventArgs e)
in System.Windows.Forms.Control.PaintWithErrorHandling(PaintEventArgs e, Int16 layer, Boolean disposeEventArgs)
in System.Windows.Forms.Control.WmPaint(Message& m)
in System.Windows.Forms.Control.WndProc(Message& m)
in System.Windows.Forms.Control.ControlNativeWindow.OnMessage(Message& m)
in System.Windows.Forms.Control.ControlNativeWindow.WndProc(Message& m)
in System.Windows.Forms.NativeWindow.Callback(IntPtr hWnd, Int32 msg, IntPtr wparam, IntPtr lparam)


************** Assembly caricati **************
mscorlib
Versione assembly: 2.0.0.0
Versione Win32: 2.0.50727.5466 (Win7SP1GDR.050727-5400)
Base di codice: file:///C:/Windows/Microsoft.NET/Framework/v2.0.50727/mscorlib.dll
----------------------------------------
Launcher_ModelConverterX
Versione assembly: 1.0.0.0
Versione Win32: 1.3.0.0
Base di codice: file:///C:/programmi%20per%20disegnare%20su%20flightsimulator/modelconverter/ModelConverterX.exe
----------------------------------------
System.Windows.Forms
Versione assembly: 2.0.0.0
Versione Win32: 2.0.50727.5468 (Win7SP1GDR.050727-5400)
Base di codice: file:///C:/Windows/assembly/GAC_MSIL/System.Windows.Forms/2.0.0.0__b77a5c561934e089/System.Windows.Forms.dll
----------------------------------------
System
Versione assembly: 2.0.0.0
Versione Win32: 2.0.50727.5467 (Win7SP1GDR.050727-5400)
Base di codice: file:///C:/Windows/assembly/GAC_MSIL/System/2.0.0.0__b77a5c561934e089/System.dll
----------------------------------------
System.Drawing
Versione assembly: 2.0.0.0
Versione Win32: 2.0.50727.5467 (Win7SP1GDR.050727-5400)
Base di codice: file:///C:/Windows/assembly/GAC_MSIL/System.Drawing/2.0.0.0__b03f5f7f11d50a3a/System.Drawing.dll
----------------------------------------
ModelConverterX
Versione assembly: 1.0.0.0
Versione Win32: 1.3.0.0
Base di codice: file:///C:/programmi%20per%20disegnare%20su%20flightsimulator/modelconverter/ModelConverterX.DLL
----------------------------------------
Interfaces
Versione assembly: 1.0.0.0
Versione Win32: 1.3.0.0
Base di codice: file:///C:/programmi%20per%20disegnare%20su%20flightsimulator/modelconverter/Interfaces.DLL
----------------------------------------
ObjectModel3D
Versione assembly: 1.0.0.0
Versione Win32: 1.3.0.0
Base di codice: file:///C:/programmi%20per%20disegnare%20su%20flightsimulator/modelconverter/ObjectModel3D.DLL
----------------------------------------
ObjectWriter
Versione assembly: 1.0.0.0
Versione Win32: 1.3.0.0
Base di codice: file:///C:/programmi%20per%20disegnare%20su%20flightsimulator/modelconverter/ObjectWriter.DLL
----------------------------------------
ObjectReader
Versione assembly: 1.0.0.0
Versione Win32: 1.3.0.0
Base di codice: file:///C:/programmi%20per%20disegnare%20su%20flightsimulator/modelconverter/ObjectReader.DLL
----------------------------------------
EventLog
Versione assembly: 1.0.0.0
Versione Win32: 1.3.0.0
Base di codice: file:///C:/programmi%20per%20disegnare%20su%20flightsimulator/modelconverter/EventLog.DLL
----------------------------------------
ObjectRenderer
Versione assembly: 1.0.0.0
Versione Win32: 1.3.0.0
Base di codice: file:///C:/programmi%20per%20disegnare%20su%20flightsimulator/modelconverter/ObjectRenderer.DLL
----------------------------------------
GRV11DLL
Versione assembly: 1.0.0.0
Versione Win32: 1.0.0.0
Base di codice: file:///C:/programmi%20per%20disegnare%20su%20flightsimulator/modelconverter/GRV11DLL.DLL
----------------------------------------
ParticleEffects
Versione assembly: 1.0.0.0
Versione Win32: 1.3.0.0
Base di codice: file:///C:/programmi%20per%20disegnare%20su%20flightsimulator/modelconverter/ParticleEffects.DLL
----------------------------------------
System.Configuration
Versione assembly: 2.0.0.0
Versione Win32: 2.0.50727.5420 (Win7SP1.050727-5400)
Base di codice: file:///C:/Windows/assembly/GAC_MSIL/System.Configuration/2.0.0.0__b03f5f7f11d50a3a/System.Configuration.dll
----------------------------------------
System.Xml
Versione assembly: 2.0.0.0
Versione Win32: 2.0.50727.5420 (Win7SP1.050727-5400)
Base di codice: file:///C:/Windows/assembly/GAC_MSIL/System.Xml/2.0.0.0__b77a5c561934e089/System.Xml.dll
----------------------------------------
mscorlib.resources
Versione assembly: 2.0.0.0
Versione Win32: 2.0.50727.5466 (Win7SP1GDR.050727-5400)
Base di codice: file:///C:/Windows/Microsoft.NET/Framework/v2.0.50727/mscorlib.dll
----------------------------------------
System.Windows.Forms.resources
Versione assembly: 2.0.0.0
Versione Win32: 2.0.50727.5420 (Win7SP1.050727-5400)
Base di codice: file:///C:/Windows/assembly/GAC_MSIL/System.Windows.Forms.resources/2.0.0.0_it_b77a5c561934e089/System.Windows.Forms.resources.dll
----------------------------------------
Utils
Versione assembly: 1.0.0.0
Versione Win32: 1.3.0.0
Base di codice: file:///C:/programmi%20per%20disegnare%20su%20flightsimulator/modelconverter/Utils.DLL
----------------------------------------
TextureObject
Versione assembly: 1.0.0.0
Versione Win32: 1.3.0.0
Base di codice: file:///C:/programmi%20per%20disegnare%20su%20flightsimulator/modelconverter/TextureObject.DLL
----------------------------------------
TextureLoader
Versione assembly: 1.0.0.0
Versione Win32: 1.3.0.0
Base di codice: file:///C:/programmi%20per%20disegnare%20su%20flightsimulator/modelconverter/TextureLoader.DLL
----------------------------------------
System.resources
Versione assembly: 2.0.0.0
Versione Win32: 2.0.50727.5420 (Win7SP1.050727-5400)
Base di codice: file:///C:/Windows/assembly/GAC_MSIL/System.resources/2.0.0.0_it_b77a5c561934e089/System.resources.dll
----------------------------------------

************** Debug JIT **************
Per attivare il debug JIT, è necessario impostare il valore
jitDebugging nella sezione system.windows.forms del file di configurazione
dell'applicazione o del computer (machine.config).
L'applicazione inoltre deve essere compilata con il debug
attivato.

Ad esempio:

<configuration>
<system.windows.forms jitDebugging="true" />
</configuration>

Quando il debug JIT è attivato, tutte le eccezioni non gestite
vengono inviate al debugger JIT registrato nel computer,
anziché essere gestite da questa finestra di dialogo."

How Can solve the problem?
What can delete because the program work again?

system windows premium 64 bit

Tks
 
Last edited:
Also to note that in Vista/W7, you must use "Run as Administrator" to get the program working correctly, well at least on both of my machines I have to.
 
Hi,

Run as administrator should not be needed normally. I think that is only needed if you put it in a system folder where the UAC prevents you from control.
 
You must log in or register to reply here.
Back
Top