• Which the release of FS2020 we see an explosition of activity on the forun and of course we are very happy to see this. But having all questions about FS2020 in one forum becomes a bit messy. So therefore we would like to ask you all to use the following guidelines when posting your questions:

    • Tag FS2020 specific questions with the MSFS2020 tag.
    • Questions about making 3D assets can be posted in the 3D asset design forum. Either post them in the subforum of the modelling tool you use or in the general forum if they are general.
    • Questions about aircraft design can be posted in the Aircraft design forum
    • Questions about airport design can be posted in the FS2020 airport design forum. Once airport development tools have been updated for FS2020 you can post tool speciifc questions in the subforums of those tools as well of course.
    • Questions about terrain design can be posted in the FS2020 terrain design forum.
    • Questions about SimConnect can be posted in the SimConnect forum.

    Any other question that is not specific to an aspect of development or tool can be posted in the General chat forum.

    By following these guidelines we make sure that the forums remain easy to read for everybody and also that the right people can find your post to answer it.

FSXA Multiparts mapping

Messages
44
Country
france
Hello Gentlemens.
-
I usually only "read" here.
Collecting practices and apply (as many I think ;-) ).
-
This one "stuck" me a little.

-

-
I'm working on a plane ... I don't know in english ;)
Something like "tube and fabric".
-
The "Out" is a loft.
"In" are two polygons to make the "fabric".
And somes tubes to rigidify the all.
Loft and polys are the same part, Ok.
But for the tubes...
I' ve made "attach".
But it's seem to be "insuffisant" to map all this in one time.
-
Is there a "recipe" to do that ?
-
Perhaps it's a "basic one ", but I'm not able to find a answer.
-
I appologise for my English.
-
Thanking all in advance.
-
Daniel.
-
The plane is a german "Kiebitz", an "ultra ligth" for European rule.
But with the look of "vintage" one.
Just "google" Kiebitz".
You 'll see.
 
Hi Daniel,

nice to see that you are making a Kiebitz. A friend of mine has a "real" one and I got the chance to fly it. :)

The tailplane doesn't have any profile, if I remember right?

That's what I have done with my Fokker (it's basically the same construction):
I made the outline as a line and gave it the desired thickness. Basically what you have, only without the rips. Then I converted it to Epoly and deleted the ones which were facing "inside". In poly mode you can create new ones (scroll a bit down, there is the "create" button). With vertex snap it's quite easy to go from vertex to vertex to "fill" the hole between the half tubes.

Unfortunately I'm not at home and I have only my laptop, so I can't post any screenshots. Hope it helps anyway.

Kai
 
Hi,
if i understand correctly you are trying to map a texture to your parts.
Maybe you know this already, but i made some images and text to try to help you.

These parts have been attached, you say.
So essentially it should be one part now.

I made a small example with some primitives, 3 cilinders and 1 box (image 1)
These are converted to editable poly and then the box was selected and clicked ATTACH.
Next the cilinders are to be selected, so they are attached to the box. You can see the colors matching up as they are attached.
See image 2, one cilinder still to be attached.

Then a material was applied to the part (image 3).

Then a UVW map modifier was applied, this one had to be rotated 90 degrees (click on the little + sign, select gizmo and rotate as you wish).(again see image 3, the yellowish square is the UVW mapping square prior to being rotated 90 degrees)

Then a bitmap was inserted into the material. Don't forget to click on (Lionheart's :rotfl:) blue&white checkered box to make the texture visible on the part (image 5).

As you can see, the entire part now has the texture applied.

One of the benefits of using the UVW map modifier is that you are able to map more parts to one texture sheet, for that you need to apply an Unwrap UVW modifier.
Now you can select EDIT and an editor will open. In there you have control of the position of the UVW map in relation to (a section of) the bitmap.

Next step could also be the use of a multi-material to be able to have more control over which (sections) of parts should receive the texture.
But you should be able to find more info on Unwrapping UVW's and Multi-materials on the forum. Plenty has been written on the subjects.

Also, this tutorial really got me started on the subject years ago:
http://www.fsalpha.com/cgi-bin/file...alpha.com/tutorials/zip/+FSA_wing_mapping+zip

Hope this helps!
grt
Willem
 

Attachments

  • mapping01.jpg
    mapping01.jpg
    152.5 KB · Views: 442
  • mapping03.jpg
    mapping03.jpg
    152.9 KB · Views: 388
  • mapping04.jpg
    mapping04.jpg
    182.6 KB · Views: 384
  • mapping05.jpg
    mapping05.jpg
    228.3 KB · Views: 388
Last edited:
Resolved

For Kai503:
You're right, no profil, but somes tubes ...
That's them I try to make appear.
For the thickness I've work with editable mesh / points.
Hide all but keep these wich will be used to create two polys.
So I've the thickness too.
The "hide" function is really usfull in this case.
-
For Willem :
Thank's a lot for the time you pass.
I've applied your "recipe" without success ...
The mistake was elsewhere ...
Just "old" materials previously applied to my tubes...
-
So many hours passed on such a basic error !! ;-))
-
And a lot of work ahead ...
In any case, thank you.


Daniel.
 
For Kai503:
The mistake was elsewhere ...
Just "old" materials previously applied to my tubes...
-
So many hours passed on such a basic error !! ;-))

Ahh well, that's the story of building aircraft for FS... :duck::coffee:

Nice looking model!

grt
Willem
 
Back
Top