• Which the release of FS2020 we see an explosition of activity on the forun and of course we are very happy to see this. But having all questions about FS2020 in one forum becomes a bit messy. So therefore we would like to ask you all to use the following guidelines when posting your questions:

    • Tag FS2020 specific questions with the MSFS2020 tag.
    • Questions about making 3D assets can be posted in the 3D asset design forum. Either post them in the subforum of the modelling tool you use or in the general forum if they are general.
    • Questions about aircraft design can be posted in the Aircraft design forum
    • Questions about airport design can be posted in the FS2020 airport design forum. Once airport development tools have been updated for FS2020 you can post tool speciifc questions in the subforums of those tools as well of course.
    • Questions about terrain design can be posted in the FS2020 terrain design forum.
    • Questions about SimConnect can be posted in the SimConnect forum.

    Any other question that is not specific to an aspect of development or tool can be posted in the General chat forum.

    By following these guidelines we make sure that the forums remain easy to read for everybody and also that the right people can find your post to answer it.

Rather Stuck

Messages
23
Country
unitedkingdom
:banghead:

Hi guys...

I need some help... Ive been trying to place a carrier, yacht, oil rig, hospital and helipad in Cornwall... But I've ran into a few problems..

ModelConverter X - Spot on BUT I can only find the carrier in the SimObjects file in the FSX directory... I have no idea how to find the hospital, oil rig etc through the wizard or through import

Object Placement in FSX... I load it up but the sim slews and just goes crazy

Whisplacer - Best results yet... BUT.... My helicopters go through the helipads and carriers :\

Can anyone give me some tips on the easiest way (with instructions if you're feeling generous) on how to place these items.

I'm sorry that its probably a noddy question which is asked too many times but I just cant find the answers :(
 
Hi,

And stuck? What else is new? Does not everybody once in a while?
You are probably mixing up two completely different things, namely simobjects (not static) and library objects (static).
If it is a simobject and you have saved your object mdl, you need to place it inside a folder named whatever you want but with subfolders like all the other simobjects. Your mdl then goes into the model folder and you have to point your model.cfg to that mdl.
If on the other hand, it is a static object, then you first have to convert it into a bgl (xml+mdl+compile) and it will be a scenery object that you can place with whisplacer or another program.
Your next comment concerns the fact that apparently your simobject falls through your self made scenery object. And that is because you do not have a hard surface underneath.
So, give us some more info on what exactly you are trying to achieve so that the reply can be narrowed down to your own particular problem if not I will still be explaining by tomorrow morning and still not know if I my reply is relevant or not:).

Roby

PS I have a Saitek Cyborg EVO joystick and everytime I load up FSX, it goes berserk when in slew mode. I have to unplug it, replug it and recalibrate in the FSX menu.
 
Thanks for the response :)

Thats probably my problem, I was using the Saitek yoke then the the X52 and they both went crazy :S

Back to the good stuff...

Basically I want (and I've been asked) to design a mission-type "adventure" for the guys on FSOpen. My aim is to reconstruct a helicopter search and rescue scenario.

I want them to take off from RNAS Culdrose in Cornwall and fly south-west towards the Isles of Scilly where between the coast and the islands, I want to place a Yacht with helipad next to a carrier (That way any helicopter can land on either the yacht of carrier). Then I want them to fly to an oil rig off of Falmouth as they get another call, then to take their casualties to a hospital in Truro.

As this is being used online in multiplayer, It needs to be scenery so I can send it to each individual.

Hope that clears it up :)
 
Hi,

In a way it does. However I am not proficient in missions,
But I do not think that is the problem.
You seem to want to place a static carrier with hardened surface, next to it a yacht with hardened helipad and an oil rig with a hardened surface so that the heli's can land on them.
That would mean, in the first place to make those as scenery objects in which case it is 'simply' a matter of making them scenery object bgl's.
What I do (and there are some other ways as well) is to use the librarycreator.xml program by Arno Gerretsen to make it a libraryobject bgl bearing the library name you want to give for the various objects. I place them in the scenery with the ADE LOM but you can use any other program you like to place them geographically.
Afterwards it is a question of putting them seperately in an addon scenery folder that has to be activated in the FSX scenery library.
There is a big 'but' namely that you have to harden the surface of those objects. And that you can do as well with MCX by adding a platform as an attached object in the 'attached object editor' before exporting the mdl.
In case you want ATC, then it is another story completely but I do not know if you want that?
 
Thanks for the reply.

Where can I find the oil rigs/helipads etc that aren't in the FSX Sim objects finder?
 
This is so confusing. Ive been trying all these bits for bloomin days but I just cant figure it out. All I want to do is place a few objects into the sea and onto some grass... why isnt it bloomin simple?

Could someone please give me an idiots step by step guide to starting a programme, finding the objects and getting them into FSX... I'm starting to get annoyed with my lack of intelligence here :( :banghead:
 
Join the club!

The oilrigs and helipads are not simobjects, they are scenery objects. And a carrier can be a simobject (i.e moving) or a scenery object (in which case it is static).
Please tell me what tools you use because I do not know them all.
I tried to explain how I do it using MCX, LibraryCreatorxXML and ADE. Those tools are free and available on this site.
So, assuming you know how to use those, let us make some static objects if you do not have them already.
Load ADE and open a stock airport close to where your scenery is supposed to come, (suppose it is going to be EGDR) . Then go to the Library object manager in the Tools and just have a look if there is an oilrig in the mission objects library. just to make sure.
Start FSX and go to EGDR. Slew to the place where you want your oilrig. Make sure you connect ADE to FSX and press connect. When your cursor is on the spot where you want your oilrig, right click > add> library object> find your object in the pop up screen and click add. , Save your airport, close FSX, compile and place the airport in your addon scenery/scenery folder.
You will now have an oilrig over there. Try it because I do not know if it has a ghard surface or not. In case it has not I will explain further how to make a hard surface on it using ModelConverterX.
 
The tools I have (Not that I know how to use them are: MCX, Whisplacer and ADE (I know how to use that one) :)
 
Good, so you can already put your oilrig in place the way I explained and check out whether it has a hard surface or not.
 
Okay that works :)

Can you explain to me how I get these specific items (Hospital, oil rigs etc) into Model converter so I can give them a hard base? Although sometimes I am able to land on the items, I still manage to go through them
 
Hi,

Most (if not all) of the default library objects are found in the scenery\global\scenery folder of FSX. E.g. the oilrig in the mission objects bgl and a hospital in the buildings bgl.
You open MCX and load that bgl. As there are many objects in those bgl's, click on list objects and scroll down until you find the one you need. Select it by clicking on it and it will show up in the MCX screen.
Now go to the attached object editor, click on add, choose platform and fill in the dimensions and the x,y coordinates relative to the point of origin where you want the platform.
Click on object information> edit" fill in another name and set a new GUID. Export your object as an mdl.
Now open LibraryCreatorXML, click on 'new' > 'add mdl' > find your mdl and select it > save library (give it a name and specify in which folder you want it to go). You have now created a new library object that you can add to the LOM (library object manager) in ADE and place the object the way it was explained earlier on.
There is a small problem, though, and that is that I think you cannot distribute a default library object that has been changed in some way. That would mean that you would either have to make your own, that you find one that can be freely used or that you make an invisble platform that you put in the same spot.
In the last case, you could 'simply' make it yourself with Google Sketchup (GSU) by making a rectangle or a circle and give it a transparent texture, export it as a collada file (= .dae extension), load that one in MCX, make it hard by adding a platform to in the aformentioned way and repeat the rest of the procedure.
The same procedure can of course be used for the hospital and the helipad when there is no hard surface present.
Make sure that your library bgl (with the objects in it) is placed in a scenery folder that has been added and activated in the scenery library list of FSX.
There are more ways to do it and mine is maybe not the fastest one but it works.
Check this out and we will go on next with the static carrier (in case you want it to be an 'airport' with ATC that shows up in the GPS, that has a start location, etc).
 
Hi,

And stuck? What else is new? Does not everybody once in a while?
You are probably mixing up two completely different things, namely simobjects (not static) and library objects (static).
If it is a simobject and you have saved your object mdl, you need to place it inside a folder named whatever you want but with subfolders like all the other simobjects. Your mdl then goes into the model folder and you have to point your model.cfg to that mdl.
If on the other hand, it is a static object, then you first have to convert it into a bgl (xml+mdl+compile) and it will be a scenery object that you can place with whisplacer or another program.
Your next comment concerns the fact that apparently your simobject falls through your self made scenery object. And that is because you do not have a hard surface underneath.
So, give us some more info on what exactly you are trying to achieve so that the reply can be narrowed down to your own particular problem if not I will still be explaining by tomorrow morning and still not know if I my reply is relevant or not:).

Roby

PS I have a Saitek Cyborg EVO joystick and everytime I load up FSX, it goes berserk when in slew mode. I have to unplug it, replug it and recalibrate in the FSX menu.
Hi,I still a relevant problems,I've installed my model in Whisplacer,and I could put that bgl file into fsx ,and it worked out in the game.but I suppose you know Whisplacer could let you see preview live in FSX ,do you know how to do that for the model people created themselves not the default ones in FSX or Accelaration ? many thanks
 
Back
Top