• Which the release of FS2020 we see an explosition of activity on the forun and of course we are very happy to see this. But having all questions about FS2020 in one forum becomes a bit messy. So therefore we would like to ask you all to use the following guidelines when posting your questions:

    • Tag FS2020 specific questions with the MSFS2020 tag.
    • Questions about making 3D assets can be posted in the 3D asset design forum. Either post them in the subforum of the modelling tool you use or in the general forum if they are general.
    • Questions about aircraft design can be posted in the Aircraft design forum
    • Questions about airport design can be posted in the FS2020 airport design forum. Once airport development tools have been updated for FS2020 you can post tool speciifc questions in the subforums of those tools as well of course.
    • Questions about terrain design can be posted in the FS2020 terrain design forum.
    • Questions about SimConnect can be posted in the SimConnect forum.

    Any other question that is not specific to an aspect of development or tool can be posted in the General chat forum.

    By following these guidelines we make sure that the forums remain easy to read for everybody and also that the right people can find your post to answer it.

FSXA Basic Bump map settings

Messages
246
Country
southafrica
Good morning,

I am looking for basic bump map guide for Gmax. FS9 didnt use bump maps, and with the FSX Materials system, I am way confused! :)

Best regards,

Jakes
 
In the Gmax material editor, bump maps go in the "bump" slot under "maps". To actually make a bump map, you'll need a normal map filter for your paint program (i.e. GIMP or Photoshop), then use ImageTool to convert it to DXT5 DDS. There is a guide in the SDK for making bump maps so you might want to look in there. ;)
 
Bill Leaming taught me the basics on compiling a Normal 'Bump' map. Just place this info on a TXT file somewhere on your computer.

When you create one (through the tool you have), go to Channels, copy/paste the Red to Alpha channel. Then use Fill and make Red pure Black, and make Blue pure White. Green will appear Gray, so will the Alpha. Top will be blue.

When you turn on the Alpha and all the other Channels, the copy color should appear Purple looking.

Basically, you can create a bump map in quick order by re-using a regular texture that has rivets and lines on it.

All bumps will be lite colored, all depressions will be dark gray. More extreme shades for extreme heights. For instance, tall rivets will be white, holes, black. Slight rivets will be bright gray, etc....

So... Take a wing texture with rivets and lines on it. Save as wing_bump.psd. Create a half gray layer at the top that blocks out all paint, etc. Drag and drop all your 'bumpie things' up there; lines, rivets, fuel cap gizmo's, all of those layers. Make sure that all bumps are light, all recesses are dark. Done.

Save, save as a Bitmap also.

Close the PSD, open the BMP version. Convert that to a Normal/Bump. Copy the Red channel to Alpha layer/channel (create the Alpha, drop the Red in it, which is probably gray). Fill Red channel with pure black RGB 0,0,0. Fill Blue with pure white. Save as DDS. After saving, flip vertically and save again.



NOTE1: I create a copy, usually in BMP, and turn 'that' into a Normal/Bump so that I do not damage the original. Perhaps I do not need to do this, but I do. I have messed up master PSD files before in the past, so I take no chances.

NOTE2: I make the Normal/Bump 'before' I flip the material vertically. If you do not, I think the shadings will be off. Not sure, but makes sense.

NOTE3: In the gaming industry, they call a bump map a 'Normal' map. Here, we call them bump maps. So, if you hear Normals and Bumps, just remember they are the same.

NOTE4: With reversed surfaces that were 'Mirrored', your indentions will be reversed, rivets will be in's and holes will be outs. Everyones right wings in FS are like this. To reverse it, reverse the grays on your bump maps, (quickly done, not a big issue). For your fuselage though, if you really want high detail, you'll need to reverse things on the right side that was mirrored, if you mirrored one side of it.

NOTE5: If you have Photoshop, you can get the free nVidia tools that work in Photoshop. They have the best Bumpmap creator.

For nVidia tool settings, I use this, attached... Now, I use both Photoshop 6.0 and PS CS6. My 6.0 still has the proper bump map settings. I do not know the settings yet for CS6, I havent set them up yet, but they should be close to this pictured. If there are better setttings, please, someone chime in and let us know.

And THAT....!!!! is Bump Maps 101. Class is over. Hope you took notes..
 
Last edited:
WOW!! Tutorial 101~
Thanks for the big effort in helping! It is much appreciated, and in my opinion the heart of this community. Not the help one get, but the willingness to help others! Big hearted, Thanks!
 
Most welcome.

If no one helped me, I wouldnt be where I am. Glad to help out when I can.

Just remember to pass it on when others need help. It helps you to not get rusty as well. ;)
 
Back
Top