• Which the release of FS2020 we see an explosition of activity on the forun and of course we are very happy to see this. But having all questions about FS2020 in one forum becomes a bit messy. So therefore we would like to ask you all to use the following guidelines when posting your questions:

    • Tag FS2020 specific questions with the MSFS2020 tag.
    • Questions about making 3D assets can be posted in the 3D asset design forum. Either post them in the subforum of the modelling tool you use or in the general forum if they are general.
    • Questions about aircraft design can be posted in the Aircraft design forum
    • Questions about airport design can be posted in the FS2020 airport design forum. Once airport development tools have been updated for FS2020 you can post tool speciifc questions in the subforums of those tools as well of course.
    • Questions about terrain design can be posted in the FS2020 terrain design forum.
    • Questions about SimConnect can be posted in the SimConnect forum.

    Any other question that is not specific to an aspect of development or tool can be posted in the General chat forum.

    By following these guidelines we make sure that the forums remain easy to read for everybody and also that the right people can find your post to answer it.

FSX Basic Multi Channel Setup Tutorial

Messages
64
Country
australia
Hi Guys,

im really struggling with this one...i guess its because im really not sure where to look for answers...or even what to call the damn setup in the first place!

whilst im not a computer programmer, i do have a basic knowledge and understanding of html and am in the process of building my own website. im still mucking around trying to decide whether to publish it using a CMS like joomla or go the whole hog and build it from scratch using Microsoft Web Expression (since i cant make up my mind at present im doing both as i find the Web Expression option provides far greater control, however, it also requires far greater knowledge).

Anyway, back to the important stuff

In terms of hardware and networking... i build all my own systems at home, and whilst not an expert...i have them networked using tcp-ivp4 with a dlink router/modem also acting as the default gateway to the internet...and am also using a static ip address from my internet service provider.

The current system i run is struggling to produce reasonable framerates, particularly when;

1. running more complex aircraft instrument panels (such as garmin glass cockpits)
2. using custom created airports (for example ORBX Brisbane Int'l airport is a real bad one)

I see lots of sims that have multiple pc's sharing resources in order to run.

What i dont seem to be able to find, is a tutorial that explains in very basic lingo how on earth one goes about setting the thing up (hardware and software tutorials. videos would be ideal)

I have 2 pc's. (1 x amd fx6100 Bulldozer, and 1 x Intel I7 2700k)

3 monitors (amd eyefinity on a radeon 6970 gpu)

I intend to setup the Intel machine as my main system on which the sim runs using the amd pc for secondary stuff that chews up my Intels CPU resources.

Im thinking the following

Intel - main scenery display across multiple monitors (would my ORBX scenery need to run on this machine too???)

AMD - gauges, AI, Addons, Sound etc

Now how do i set them up to share resources running fsx and what resources are best run on each of the pc's.


cheers Adam
 
From my experience, there is no "one way fits all" on how to set up multiple PC's for FSX so no one tutorial on the subject. But there is a lot of good info out there if you are willing to put in the time to research.

Planning your setup first I think is key. For me it was deciding how many displays on my main PC (three 27" using Nvidia Surround). How many on my 2nd PC (one or two depending on what I end up using). I also have a laptop that I use as a weather generator, GPS, Flight planner, and even as a flight board to track/plan spot with.

PC clients for FSX are good to run such programs as weather generators, flight planners, and external instruments such as an aircraft displays. These are usually interfaced by three different means:

1) Simconnect (comes with FSX)
2) FSUIPC (external 3rd party program - comes in a freebie or payware flavor)
3) Custom interface that comes with the program.

As far as I know scenery such as orbx cannot use a 2nd pc to help the workload. The only way I could see this is if you plan to have a wrap around setup and have each screen set up to a dedicated pc using a program like WidevieW.

Each program should provide instructions on how to set up on a client pc if it is indeed possible. Again research before you buy to make sure.

A couple of websites have dedicated sections in their forums specifically for hardware/software/graphics cards and the like. There are avsim.com and flightsim.com. Also there are some dedicated "cockpit" type forums which dig even deeper into interconnections and the like. YouTube is good for research if you put in a good subject title to search with.

Hope that helps,

Clutch
 
hi clutch,
it sort of helps...prompts me to ask more questions though.

I guess I am simply wanting to start out simple and small.

Intel machine

running main scenery and aircraft model/animation

using eyefinity with 3 monitors for the moment

AMD machine two monitors at this stage
running instruments
simulator sound effects and,
AI traffic (woah! hang on a minute...on second thought, that might have to go on main scenery machine)

How do I go about setting that up? I haven't a clue where to start...You tube isn't very forthcoming as im not really sure what keywords I should be searching for, and the videos I have seen are very poor quality and aren't very well structured (in fact some are downright pathetic!)

I assumed that im trying to search for "fsx multichannel". Not really finding any wiki stuff under that!

what i'm after is a simple well structured tutorial (or tutorials) that takes me through the programming for a multichannel configuration like the one I have mentioned above.

The hardware isn't really a problem for me ...the "grease and oil" part of a simulator sits within my comfort zone, however, the programing does not!
 
Last edited:
Couldn't tell ya. I was about where you were several months ago. Gonna have a 3 27" display Nvidia Surround on one machine and a small 10" touchscreen for loading some gauges on the second. But I ripped up my arm so all progress stopped. This is the first week I can actually use my "mouse hand" again, ha!
 
Not really sure what you mean by 'Multi Channel'?

However, I see that you are trying to get several PC's to run FSX at one time. Correct? :confused:

I think you are looking for something like Pete Dowson's WideFS for multiple software running for FSX over different machines, and either Maxtor's TripleHead2Go or video cards like Matrox.

As far as I know( I have been an IT/IS professional for the last 25+ years ), 'linking' multiple PC's is not readily available to the public.

Hope that helps! ;)
 
Back
Top