• Which the release of FS2020 we see an explosition of activity on the forun and of course we are very happy to see this. But having all questions about FS2020 in one forum becomes a bit messy. So therefore we would like to ask you all to use the following guidelines when posting your questions:

    • Tag FS2020 specific questions with the MSFS2020 tag.
    • Questions about making 3D assets can be posted in the 3D asset design forum. Either post them in the subforum of the modelling tool you use or in the general forum if they are general.
    • Questions about aircraft design can be posted in the Aircraft design forum
    • Questions about airport design can be posted in the FS2020 airport design forum. Once airport development tools have been updated for FS2020 you can post tool speciifc questions in the subforums of those tools as well of course.
    • Questions about terrain design can be posted in the FS2020 terrain design forum.
    • Questions about SimConnect can be posted in the SimConnect forum.

    Any other question that is not specific to an aspect of development or tool can be posted in the General chat forum.

    By following these guidelines we make sure that the forums remain easy to read for everybody and also that the right people can find your post to answer it.

Bouncing Airplanes

Messages
19
Country
unitedstates
Hey everyone.
I have posted this question in another thread but haven't heard anything back so I thought I would give this a try here even though it might not be specific to the forum. The problem I have has to do with airplanes jerking and bouncing around while on the ground. I have not seen anything like this before. I have tried adjusting the setting to minimize the computer being overworked but nothing so far has fixed it. Here is a video of the problem. Thanks in advance for any help.

http://tinypic.com/r/15xs3ma/8

Prepar3d v2
 
Are these particular models or a general problem? If just one, please post the contact points section from aircraft.cfg.
 
I noticed this in P3D v2 at PHX two days ago, had a bunch of Mesa CR9's bouncing around, literally rotating in place. I had just recently updated a certain CR9 model (...yes, yes, I know) to the FSX version but kept the FS9 aircraft and air file. After reading your post, I went and replaced the aircraft file with the FSX file and all seems to be well. The air file is still from FS9 as it is one of Jan's FDE enhancements. I haven't seen this elsewhere, but perhaps I will. I hope this helps.
 
If it helps at all, all of these aircraft are from ESP and now being used in Prepar3d. I believe it is only a few types of planes doing it and not all of them. Here is the crj7 .cfg file which has been.
//[contact_points]
//point.0=1, -8.50, 0.00, -6.70, 1600, 0, 0.5625, 46.8, 0.80, 2.5, 0.55, 10.0, 10.0, 0, 260.0, 260.0
//point.1=1, -56.50, -6.76, -8.60, 1600, 1, 1.0, 0.0, 0.90, 2.5, 0.65, 9.0, 9.0, 2, 260.0, 260.0
//point.2=1, -56.50, 6.76, -8.60, 1600, 2, 1.0, 0.0, 0.90, 2.5, 0.65, 9.0, 9.0, 3, 260.0, 260.0
[contact_points]
point.0=1, -8.50, 0.00, -5.70, 1600, 0, 0.5625, 46.8, 0.80, 2.5, 0.55, 10.0, 10.0, 0, 260.0, 260.0
point.1=1, -56.50, -6.76, -8.10, 1600, 1, 1.0, 0.0, 0.90, 2.5, 0.65, 9.0, 9.0, 2, 260.0, 260.0
point.2=1, -56.50, 6.76, -8.10, 1600, 2, 1.0, 0.0, 0.90, 2.5, 0.65, 9.0, 9.0, 3, 260.0, 260.0
point.3=2, -65.00, -39.00, 0.00, 1000, 0, 0.000, 0.00, 0.0, 0.0, 0.0, 0.0, 0.0, 5, 0.0, 0.0
point.4=2, -65.00, 39.00, 0.00, 1000, 0, 0.000, 0.00, 0.0, 0.0, 0.0, 0.0, 0.0, 6, 0.0, 0.0
point.5=2, -43.00, 0.00, -3.80, 1000, 0, 0.000, 0.00, 0.0, 0.0, 0.0, 0.0, 0.0, 9, 0.0, 0.0
point.6=2, -98.00, 0.00, 16.00, 1000, 0, 0.000, 0.00, 0.0, 0.0, 0.0, 0.0, 0.0, 9, 0.0, 0.0
point.7=2, -8.00, 0.00, -2.00, 1000, 0, 0.000, 0.00, 0.0, 0.0, 0.0, 0.0, 0.0, 4, 0.0, 0.0
point.8=2, -80.00, 0.00, -1.50, 1000, 0, 0.000, 0.00, 0.0, 0.0, 0.0, 0.0, 0.0, 4, 0.0, 0.0
 
Thanks Dmiller94, I've placed these in Max and checked: sometimes a scrape point is misplaced and the model teeters on it, but these are all clear of the gear points' plane. Possibly centre of gravity is very close to the rear wheel line and loading the aircraft up will settle it – or the reverse and loading it up brings CoG very close to the rear gear line!
 
Thanks for checking those for me. Does it make any difference that I copied these aircraft form Microsoft ESP and put them directly into Lockheed Prepar3d? They ran fine in the past but now in P3d have started acting up.
 
It ought not to! I'm not aware of any differences between the sims that should affect stability on the ground.
 
Back
Top