• Which the release of FS2020 we see an explosition of activity on the forun and of course we are very happy to see this. But having all questions about FS2020 in one forum becomes a bit messy. So therefore we would like to ask you all to use the following guidelines when posting your questions:

    • Tag FS2020 specific questions with the MSFS2020 tag.
    • Questions about making 3D assets can be posted in the 3D asset design forum. Either post them in the subforum of the modelling tool you use or in the general forum if they are general.
    • Questions about aircraft design can be posted in the Aircraft design forum
    • Questions about airport design can be posted in the FS2020 airport design forum. Once airport development tools have been updated for FS2020 you can post tool speciifc questions in the subforums of those tools as well of course.
    • Questions about terrain design can be posted in the FS2020 terrain design forum.
    • Questions about SimConnect can be posted in the SimConnect forum.

    Any other question that is not specific to an aspect of development or tool can be posted in the General chat forum.

    By following these guidelines we make sure that the forums remain easy to read for everybody and also that the right people can find your post to answer it.

FSX Cockpit modelling question.

Messages
42
Country
australia
Hi everyone, I am starting to make freeware 737-300 for FSX, I am about to start modelling the cockpit but have a few questions. First of all when creating the cockpit should my units be 1 unit=1 Meter in 3ds Max? Second question, how I create switches which move, I understand how to model but do switches have to be attached with a joint or not attached at all? Third of all should the VC be created in a different 3DS Max project to the exterior?

Thanks in advance.
 
Hi everyone, I am starting to make freeware 737-300 for FSX, I am about to start modelling the cockpit but have a few questions. First of all when creating the cockpit should my units be 1 unit=1 Meter in 3ds Max? Second question, how I create switches which move, I understand how to model but do switches have to be attached with a joint or not attached at all? Third of all should the VC be created in a different 3DS Max project to the exterior?

Thanks in advance.

Hi DatPlanGuy!

I have made a video that address the questions that you are asking. The video is for Blender but that should not make much difference, because the principle is the same for making switches. If you watch video 23 (Working On Mouse Rects) I address creating a switch with animations and mouse rects.

Yes, the VC model is a separate model file. In FSX you have an exterior model and an interior model. Now if you want to be able to see inside of your plane and see the cockpit when viewing the exterior model in FSX. You will need to create a VC for the exterior model as well. Usually when viewing the cockpit from the exterior of your plane in FSX you do not need to go very detailed in the cockpit.

Here is a link to the page for Video 23. The video will be at the bottom of the page.
http://www.fsdeveloper.com/forum/th...ender2fsx-tools-video-tutorials.430998/page-3


I hope this helps you.

Krispy1001 :)
 
Thanks Krispy1001, I understand most of it now but when creating a switch or button, for example landing light switch. Do I have the switch as a separate component to the overhead panel?
 
If you are adding a landing light switch to an overhead panel. The moving part of the switch or the animated part of the switch needs to be a separate object from the overhead panel. Now the base of the switch can be modeled into the overhead panel. I hope that makes sense.

I hope that helps!

Krispy1001:)
 
I use Imperial for units, and you always want to keep your scale 1. So that means x=1, y=1, z=1. If you do not keep a scale of one your animations will not work correctly in FSX.

Krispy1001:)
 
I don't know which version of Max you're using (I use 2008) but in the Units Setup dialogue there are Display Units which can be anything you like, and there is a button for System Unit Setup which absolutely must be set at 1 unit = 1.0 metre (System Unit Scale).
 
For scale, just 'Reset Scale'. Right control panel, Hierarchy tab, 'Scale' button.

This is for parts that have a 'scale error' when exporting. If you scaled a part that will be animated or is clickable, you have to reset the scale. If not, it will not work in FS and it may not export either.

This (above in this post) has nothing to do with how you measure, only with 'scaling' of a part, Scale tool in the toolbar in Max. (not measure).
 
Under System Unit Setup I have it set to 1 unit = 1.0 cm, will I have to restart modelling?

No! Start a new scene with File/New... and set your System Unit to 1 unit = 1 metre. Make sure the box for Respect System Unit in Files is ticked.

Now merge the model you have made with this new scene: File/Merge... and select your model. You'll get a box with all the objects in your model so far listed: select all and click OK. You'll now have your model in all its glory with the System Unit correct but the bits correctly sized too.

Then immediately save this new scene. You can now carry on working!
 
So it won't matter if the scale is 1 unit=1 meter or 1 unit=1 foot, as long as it's 1?

HI DatPlaneGuy!

Sorry I did not answer again last night! It was late here and I needed to sign off.

But you got all the help you needed when Mr. LionHeart , Mr. Hairyspin answered your question. They use 3ds max. So they are the one's to answer your questions for 3ds max.

Krispy1001:)
 
I understand that the only countries haven't adopted SI (metres) are Burma, Liberia and United States.
 
You can do the same Merge trick with Gmax models if, next to the System Unit, you tick Automatic Unit Conversion.
 
Back
Top