P3D v4 Deep ditch between LOD11 & LOD13

#1
I compiled with Resample 4.4 an terrain mesh with LOD11 and a terrain mesh portion to LOD 13 at a higher priority level. The source files are all TIFF wgs84. I tried to set the parameter LOD (Auto, 13, ... 3, 13) in all the ways but the result is always the same with FractionsBits I tried first with 2, 3 and 6.
MiG_022.jpg
MiG_027.jpg
MiG_020.jpg
MiG_021.jpg

Where am I doing wrong?
Thanks for the attention!

[Source]
Type = GeoTiff
Layer = Elevation
SourceDir = "I:\MeshAngola_QGIS\MESH_ETM12"
SourceFile = "RocceNereW_01.tif"
nCols = 1168
nRows = 626
xDim = 0.000113116
yDim = 0.000113116
PixelIsPoint = 1
SampleType = UINT32
NullValue = 255

[Destination]
DestDir = "K:\SBuilderX315\P3D\RocceNere\scenery"
DestBaseFileName = "RocceNereW_LOD12_125"
DestFileType = BGL
FractionsBits = 3
LOD = Auto,13
 

rhumbaflappy

Moderator
Staff member
Resource contributor
#2
You could try this INF:
Code:
[Source]
Type = GeoTiff
Layer = Elevation
SourceDir = "I:\MeshAngola_QGIS\MESH_ETM12"
SourceFile = "RocceNereW_01.tif"

[Destination]
DestDir = "K:\SBuilderX315\P3D\RocceNere\scenery"
DestBaseFileName = "RocceNereW_LOD12_125"
DestFileType = BGL
FractionsBits = 3
LOD = 5,13
If the data is GeoTiff, you don't need nCols, etc...

Also, The LOD definition may be causing a problem, so you may want to play with that.
 
Top