Any other question that is not specific to an aspect of development or tool can be posted in the General chat forum.
By following these guidelines we make sure that the forums remain easy to read for everybody and also that the right people can find your post to answer it.

if the issue is the same described here
http://fsdeveloper.com/forum/showthread.php?t=425456
then its probably a corrupt file and replacing the default with another default will not fix it as the corruption is most likely an add-on file scenery or aircraft.
Either re-install or repair FSX and see if the problem persist.
If it does its a default file corruption, not just the b747 aircraft corruption. A re-install/repair would be required.
If removing all addon aircraft and scenery fixes it, then its an addon corruption. If thats the case, replace the addons 1 at a time until you find the culprit

I thought we had it,but it is just something with that 747. I've removed all the others so far.It appears FSX is having problems with the texture.cfg files.
I have seen issues with the user aircraft where if you select the white livery you can't select another livery until you select another model first.
What I would do if I were you is to copy all of the textures from ...\SimObjects\Airplanes\b747-400\texture to all of the other B747 texture folders and do not allow any overwrites.
This should cause FSX to ignore the texture.cfg and hopefully fix your troubles.
cheers,
Lane

I thought we had it,but it is just something with that 747. I've removed all the others so far.
The texture looked normal when i came in but all the other textures were'nt there...
I guess it looks like a reinstall again....
Reinstall may be your only choice. Its not the model thats the issue. BTW, what SP are you using?

OK I did a clean install of FSX on a new HD. I still don't have textures for the 747's, and this is the stock install without any addons....
Now what???? re-install Windows...
I'm beyond cornfused now


OK I did a clean install of FSX on a new HD. I still don't have textures for the 747's, and this is the stock install without any addons....
Now what???? re-install Windows...
I'm beyond cornfused now
The default textures would have installed with the aircraft. If they are not showing, change your settings for FSX.
Hollywood,
He has a NVidia card from what I gather in his previous post. He also said he has adjusted the sliders but that they are also maxed.
I still maintain its an overload and I still think he should lower the settings to 'low' for scenery and a/c complexity (Reflections turned off). He should also close Yahoo, or any un-needed program while FSX is running.
Beyond that, between the other threads on this issue he has partaken, we have covered all bases with the exception of hardware replacement.
Checked according to his post:
FSX Complexity SettingsI have turned all down to 50%
FSX DirectX 10 on/offOFF
Hardware drivers up to dateYes
Repair of FSX
Re-install of FSXReinstall Yes
Nvidia GeForce GTX550Ti
Quad core (someone said could be a problem)
All the ram it will hold
I understand what you say about sliders, but this all worked with what I have now.
And the question is why only the texture for the stock 747's is affected, while all other planes ,buildings,grass everything I see is not changed.

Nvidia GeForce GTX550Ti
Quad core (someone said could be a problem)
All the ram it will hold
I understand what you say about sliders, but this all worked with what I have now.
And the question is why only the texture for the stock 747's is affected, while all other planes ,buildings,grass everything I see is not changed.
Well, a law of nature states warm air rises. Then why is it colder the higher you go?And the question is why only the texture for the stock 747's is affected, while all other planes ,buildings,grass everything I see is not changed.


Guys I was on the beta for FSX. I can tell you without a doubt that there are no corrupted files, the issue is running out of RAM and FSX falls back to the default white aircraft texture when that happens. This is straight from the ACES team and is designed that way.
I am not one of those .cfg experts, but as I understand it, while FSX itself is a 32bit application, it is compiled so that it may take advantage of 64bit adressing - such that normally, 32bit apps in 32bit systems would never use full 4gigs of addressable memory (since OS needs some, then video RAM needs to be addressed as well), this setting is supposed to allow FS to go to full 4gigs available.