• Which the release of FS2020 we see an explosition of activity on the forun and of course we are very happy to see this. But having all questions about FS2020 in one forum becomes a bit messy. So therefore we would like to ask you all to use the following guidelines when posting your questions:

    • Tag FS2020 specific questions with the MSFS2020 tag.
    • Questions about making 3D assets can be posted in the 3D asset design forum. Either post them in the subforum of the modelling tool you use or in the general forum if they are general.
    • Questions about aircraft design can be posted in the Aircraft design forum
    • Questions about airport design can be posted in the FS2020 airport design forum. Once airport development tools have been updated for FS2020 you can post tool speciifc questions in the subforums of those tools as well of course.
    • Questions about terrain design can be posted in the FS2020 terrain design forum.
    • Questions about SimConnect can be posted in the SimConnect forum.

    Any other question that is not specific to an aspect of development or tool can be posted in the General chat forum.

    By following these guidelines we make sure that the forums remain easy to read for everybody and also that the right people can find your post to answer it.

Does someone what to take over EGLW project

Messages
17
VATSIM UK needs your help

I have made an heliport for the vatsim UK community in FSX SP2. However, I have reached a stage where I cannot go any further. I am looking for scenery designers to add a helipad over the river Thames in London and some ground textures. Most is already done. If you interested in helping to get this finished so we can have a heli community on the UK vatsim please please please message me. Thanks



[/

[URL=http://imageshack.us]


From the screen shots you can see what i have done so far. However as you can see the main pad is on stilts and this needs to be remodelled
 
Last edited:
What is asked?

It is very poor at English, and it isn't understood well what is asked to it as for it.
I think whether it has almost and already been completed to me.
If it is a problem on the river of the report, one sheet of plane is added in the surface
Will I only have to take concrete with AttachPointTool?
I am sorry if it is wrong.

bXtx9AFP2zm6G-gBnQn2Gg
 
Hello

Thanks for the reply. but i am finding it hard to understand what you mean. If any one could translate for me that would be great. Again thanks for your advice.
 
It appears to my eyes that the chief problem you're running up against is that the "water" and the "shoreline" are effectively the exact same elevation, which means of course that there's no room for the support pilings underneath the heliport pier landing pad!

You will likely need to raise the elevation of the river bank some six feet or so in order to accomplish your goal.
 
Is this all right?

It was made easily though it couldn't be understood yet.
Is this all right?
If so, a base is made, in Top on the base, Plane (Length Seg=1 Width Seg= 1)is put, and you only have to make Plane Concrete with FS Tool>AtachPointTool. :confused:

CAeAbZSIHpE9pIwlZZJx2g
 
Last edited:
hello

guys this is amazing advice. but would one of you guys like to do it for me if i can send you all the files. This would be a massive help.
 
Easy Explane

The base of Heripod is made with usual Gmax.
Then, a concrete number is put as a working example of the rest.
1.Length Segs=1 Width Segs=1
2.Length=19.0 Width=19.0
3.Make Plane01
4.The Heght of Plane01 is just less than a base.
5.AttachPointTool of FS TOOL is choen.
6.Platform chek
7.Surface Type=CONCRETE sellect
8.Attach to selected geometry click
9.Then name change from Plane01 to platform_CONCRETE_1.
10.This Plane01 is arrenged right onto the base later.
11.Ithink Texture to be unnecessary in Plane01
12.With Lod and GUID tool Create new GUID for this click.

ZmHEnBqt5Hz4kXoL472_zg

qyJSPlEESQEUMJM56H7UEw

JjohPpxKUulXsRhHntD7JQ

MJcnM2WITi30JJkpr-6QOw
 
Hello and thanks again

I see your detailed explination and again i thank you. to be honest thou it think the trerrain needs to be lowered on the river or the helibase rasied. And as for GMAX i have no idea how to use that programe!!! I have tried in the past and failed. If i sent you the files that i have from what i have made some far do you think you could raise or lower the terrain for more and add the helipad in.

Again i thank you for your input.
 
makes a big box

Is it a matter of step of the surface of the water and the riverbank?
If it makes a big box in the easy method and takes a step with the surface of the water and all the buildings are put on the big box.
Isn't it good? But, it causes a trouble where to make it in this method.
As for the one to make the part of the passage of the helicopter pad oblique and to dissolve a step when it thinks about harmony with other parts.
It is easy, and doesn't think that there is sense of incongruity.
Advice any further is impossible by my talent. :)
 
Back
Top