• Which the release of FS2020 we see an explosition of activity on the forun and of course we are very happy to see this. But having all questions about FS2020 in one forum becomes a bit messy. So therefore we would like to ask you all to use the following guidelines when posting your questions:

    • Tag FS2020 specific questions with the MSFS2020 tag.
    • Questions about making 3D assets can be posted in the 3D asset design forum. Either post them in the subforum of the modelling tool you use or in the general forum if they are general.
    • Questions about aircraft design can be posted in the Aircraft design forum
    • Questions about airport design can be posted in the FS2020 airport design forum. Once airport development tools have been updated for FS2020 you can post tool speciifc questions in the subforums of those tools as well of course.
    • Questions about terrain design can be posted in the FS2020 terrain design forum.
    • Questions about SimConnect can be posted in the SimConnect forum.

    Any other question that is not specific to an aspect of development or tool can be posted in the General chat forum.

    By following these guidelines we make sure that the forums remain easy to read for everybody and also that the right people can find your post to answer it.

FSXA Dummies and attachpoints?

Heretic

Resource contributor
Messages
6,830
Country
germany
Quick question:

Can you attach aircraft lights (say effects) to dummies or does it have to be "real" geometry (a small triangle/box)?
 
FS9 must be real geometry*, otherwise the exporter will "strip" all animation code.

FSX can be either real geometry or the ubiquitious "Dummy Node" of Max/GMax. EDIT: most of the time...

Because I typically use the same basic mesh for both sim versions, my long-established habit is to use a very tiny tri-poly, face down, as my "dummy objects."

In point of fact, I have a separate Max/GMax file with precisely that one, single object at 0,0,0 that I can Merge as needed for any new project. Once I have one, I simply clone as needed... ;)

*Nota bene: FS9 only support Attach Points for scenery objects. No aircraft need apply!
 
Last edited:
Quick question:

Can you attach aircraft lights (say effects) to dummies or does it have to be "real" geometry (a small triangle/box)?

Something that I discovered this evening, much to my dismay is that you can NOT Attach an effect that has built-in offsets...

...as FSX will cheerfully collapse all of the offsets to the origin.

As an example, I created a custom landing/taxi light effect (similar to the Shockwave .fx files) that is a series of gradually increasing "balls of light" that are offset forward on the y axis, that rotate in opposite directions, and are progressively dimmer...

...the idea being to create a forward pointing "beam of light."

It looked terrific in the FX Tool, but the one's I'd Attached to dummy mesh nodes simply wouldn't "expand" like the one in the FX Tool...

Then I tried adding the same .fx via the aircraft.cfg file...

BINGO! They worked perfectly, as designed.

RATS!!! :banghead::banghead:
 
*Bump*

Effects do *not* work on dummies! They *have* to be attached to a mesh!

I've tried it the "dummy way" (haha!) and couldn't make the lights show up one dang bit in FSX.
I then created 0.01*0.01*0m boxes, attached the light effects via the AttachPoint Manager to them et voilà, a stroke on the "L" key in FSX and my aircraft lit up like a Christmas tree!


FSX - not for dummies. :rolleyes: (:D)
 
*Bump*

Effects do *not* work on dummies! They *have* to be attached to a mesh!

Well not always, but which is why I have made it a habit to use "mesh dummies" and not just "dummies..." :duck:
 
Last edited:
Well not always...

So far, FSX has consequently ignored any dummies I've used for relevant stuff, like lights and bone arrays...


And since this thread is about lights et al...

The SDK contradicts itself in terms of pivot point orientation of landing lights. In the help file under "New Aircraft Procedures" -> "Landing Lights", the description says:
Center the pivot point of the object and rotate the pivot so Y is pointing in the direction of the light beam, X is toward the ground and Z is pointing starboard. This will ensure the ‘cast’ light is shining forward. (see image below)

The image 'though has Z pointing towards the ground and X pointing to port...

So...which of those two is right?
 
The one that actually works, obviously... :D

Here's how I keep it straight in my primitive brain... :rotfl:

Blue up (points to the blue sky!)
Red (right)
Green forward (Go forward!)
 
Last edited:
The one that actually works, obviously... :D

Here's how I keep it straight in my primitive brain... :rotfl:

Blue up (points to the blue sky!)
Red right
Green forward (Go forward!)

Me too, should be burned into our brains before using gmax! :duck:
 
Ancient post, but I thought I put in my $0.02 ;)

RE: Bill's cone of light with balls and effects effect approach, I HAVE been successful in adding these, and they do not collapse (I can post my FX file if anyone is interested). I've been attaching these to small mesh objects (Just like bill) and they are showing up correctly. The problem I have is, I'd like to have them aimed at different angles. So, I rotate my small mesh to where I want it aimed at, and the effect gets rotated, but not by the angle/direction I wanted it in. I have not found a correlation between geometry angle and the FSX effect angle (yet). Does anyone have any insight into this?

Also, what I noticed is that when the aircraft rotates (banks, pitches, yaws) my effect pivots by a small amount, it is not locked relative to the object.

There ARE other ways to do this, which would probably work, and I will resort to it if there is no solution to the above: Instead of building a cone effect with sprites and offsets in one fx file, I could resort to placing several single sprites in the geometry itself, effectively building a cone out of several attachpoint objects.
 
Back
Top