• Which the release of FS2020 we see an explosition of activity on the forun and of course we are very happy to see this. But having all questions about FS2020 in one forum becomes a bit messy. So therefore we would like to ask you all to use the following guidelines when posting your questions:

    • Tag FS2020 specific questions with the MSFS2020 tag.
    • Questions about making 3D assets can be posted in the 3D asset design forum. Either post them in the subforum of the modelling tool you use or in the general forum if they are general.
    • Questions about aircraft design can be posted in the Aircraft design forum
    • Questions about airport design can be posted in the FS2020 airport design forum. Once airport development tools have been updated for FS2020 you can post tool speciifc questions in the subforums of those tools as well of course.
    • Questions about terrain design can be posted in the FS2020 terrain design forum.
    • Questions about SimConnect can be posted in the SimConnect forum.

    Any other question that is not specific to an aspect of development or tool can be posted in the General chat forum.

    By following these guidelines we make sure that the forums remain easy to read for everybody and also that the right people can find your post to answer it.

DX10 shadows

Messages
20
Country
unitedkingdom
Hi all
I wonder if someone could shed some light on this problem ( pun intended :0)
I have been told my Lightning model does not show VC shadows in DX10 even with the fixer.
I tried double siding the relevant materials, and I have consolidated the inner and outer cockpit skins so it is all one piece and made the canopy and windscreen frames so they are now solid blocks , but still no shadows .
It's an FSX model with FSX materials done in Gmax. Any one know what I might be missing? Do I need to tick volume shadows ? I don't run DX10 so I cant test it out for myself .

Cheers
Dave R
 
Thanks Alexis , I gave it a go and passed on the mdl file with the relevant materials double sided and volume shadow checked , and another with the frames etc made solid and volume shadow , but it still won't work ,
just a message saying "" SMAP section in model.cfg is missing "" .
 
You need to open File / File Properties (USING GMAX)
Then in this new window click the "Custom" tab.

Then type.......
-------------------------------
Name: ShadowMapReady
Type: Text
value: TRUE
-------------------------------
Next click Update before you click ok.....

Not sure if this is your issue but is required:stirthepo Also no double sided check needed.
 
You need to open File / File Properties (USING GMAX)
Then in this new window click the "Custom" tab.

Then type.......
-------------------------------
Name: ShadowMapReady
Type: Text
value: TRUE
-------------------------------
Next click Update before you click ok.....

Not sure if this is your issue but is required:stirthepo Also no double sided check needed.
Hey DG
Nice info there , I did all that , but unfortunately it still hasn't fixed it .:0(
 
Are you clicking the checkbox for "Volume Shadow" as Alexis mention?
It's located at the bottom of the material editor where all the extra option are located.

As long as you have checked this, setup the file properties and make sure DX10 preview is on in FSX it will work!

I am assuming you did not setup the file properties correctly. It is case sensitive!
Another tip, save your scene then re open the file properties to confirm you actually saved the ShadowMapReady in your list...:idea:
 
Hi DG
Yes Volume shadow is checked on all the relevant textures, and I copied+pasted your text .....
file prop.jpg
The cockpit shell is a sealed unit and the canopy frames solid .
The guy says other models he flies cast VC shadows , so I have to presume he knows what he is doing his end !
 
Are you using SP2 or ACC?
The VC does not need to be water tight....Before SP2 you had to have water tight I think?
Any part in the interior model assigned to a material you have turned on will work!
 
Well I have ACC , I'm not sure what the other guy is using... I'll ask .
Of cause the problem doesn't even apply to me , I'm still XP/DX9 :0)
 
Well I have contacted Steve FSX, he says for DX10 shadows in the VC the model needs .....
1. To be Built with fsx sdk and have a vc model
2. Shadowmap flag is set in vc model
3. Exterior surfaces that cast shadows should be defined with material property double sided .
4. Canopy frames need to be drawn as separate objects without any transparency .
5 aircraft cast shadows on self is selected in fsx

I certainly comply with the first four so I guess there is not a lot more I can do .
 
I forgot about step 5....Standard for the aircraft setting page!
And yes it needs to be made with FSX sdk...

Also it must be the interior model. (Which to me means you never need double sided! I don't see why this is an option?)
If someone could clue me in on this exterior surface. I noticed there is exterior shadows already on the interior models exterior surface by default. I never have to set this up!
just works.....
 
I think the point about double sided is because some modellers( I for one) tend to cull any geometry that can not be seen, therefore viewed from the wrong side it is invisible , double sided materials must fix that .
In DX9 there are no exterior surface shadows on the interior model, any ground shadows are cast by the exterior model . So it would appear that DX10 generally allows the interior model to cast its own shadow?
 
Just to close this out , the problem was solved by installing the DirectX SDK, and somewhere along the line it fixed something, so now the shadowmap is automatically produced .
The five steps still apply , but if the end user wishes to use the Biz jets settings HD shadows it might be a good idea to select "no shadow" on all the textures that are not required to cast shadows , this stops any wrap around and false shadowing.

Thanks to all for the assistance :0)
 
Back
Top