• Which the release of FS2020 we see an explosition of activity on the forun and of course we are very happy to see this. But having all questions about FS2020 in one forum becomes a bit messy. So therefore we would like to ask you all to use the following guidelines when posting your questions:

    • Tag FS2020 specific questions with the MSFS2020 tag.
    • Questions about making 3D assets can be posted in the 3D asset design forum. Either post them in the subforum of the modelling tool you use or in the general forum if they are general.
    • Questions about aircraft design can be posted in the Aircraft design forum
    • Questions about airport design can be posted in the FS2020 airport design forum. Once airport development tools have been updated for FS2020 you can post tool speciifc questions in the subforums of those tools as well of course.
    • Questions about terrain design can be posted in the FS2020 terrain design forum.
    • Questions about SimConnect can be posted in the SimConnect forum.

    Any other question that is not specific to an aspect of development or tool can be posted in the General chat forum.

    By following these guidelines we make sure that the forums remain easy to read for everybody and also that the right people can find your post to answer it.

GMAX mesh problem

F747fly

Resource contributor
Messages
1,713
Country
netherlands
Hi,
I don't know if anyone here at FSdeveloper has ever come across this before or it's my incompetence with GMAX, but for some or other reason when I finished modeling the right wing on my IL-76 project and wanted to start on the left wing, the mesh for the leftwing had disappeared....

Knipsel6_zps0074e326.png


So what am I doing wron here? should I have modeld the wing differently? because I assumed I could use a simple bevel-scale-possistion technique for it...
Would there be any way to make the mesh that was in what now is a hole where the left wing would come back?

Thanks for the help in advance!
 
Did you use the Mirror modifier? If you did, you have to either tick the box marked Copy, or clone the left wing first. Or have you hidden the left wing? Hit 5 and you'll get a list of things hidden that can be unhidden.
 
Did you use the Mirror modifier? If you did, you have to either tick the box marked Copy, or clone the left wing first. Or have you hidden the left wing? Hit 5 and you'll get a list of things hidden that can be unhidden.

I checked but no hidden objects where found. I also haven't yet modeled the left wing, I had modeled the right wing and then when I got to modeling the left wing the surface from witch I was going gto create it was gone (see the image above). I think it's kind of a peculiar problem.
Seems like if there was a way to get the surface back in that hole where the left wings should be, the problem would be solved.
 
Why are you modelling the wings separately? it would be easier to model one wing then clone it & mirror it to the other side.
 
Hello f747fly,

This is just a thought - Mouse up to Your Top Menu Bar - and click on the " Select by name button " - Select Your Object - if it is there - Then Mouse on down to the bottom right section of the screen - and press the little square box that says " Zoom Extents " - Also - If that was a " No Luck Deal " - Go into Your Layers Dialog - and make sure All Your Layers are turned on - the Little Black Blob in the Listing.- Click it off !

If none of this works - then You Probably Accidentally deleted it - Go up to the main tool Bar and " Right Click " on the Undo Arrow - and see if there is a delete in the listing - if there is - You can undo back to that point - and recover Your Wing Thing.

If You Still have that Dazed Look in Your Eyes - and No Wing - You can check out Your Autoback file Which should be in Your Modeling Directory.

I know - I know - Some days we Just have More FUN Than others !!

Let us know how You make out ??

Johnman :) ;):cool:
 
Hello f747fly,

This is just a thought - Mouse up to Your Top Menu Bar - and click on the " Select by name button " - Select Your Object - if it is there - Then Mouse on down to the bottom right section of the screen - and press the little square box that says " Zoom Extents " - Also - If that was a " No Luck Deal " - Go into Your Layers Dialog - and make sure All Your Layers are turned on - the Little Black Blob in the Listing.- Click it off !

If none of this works - then You Probably Accidentally deleted it - Go up to the main tool Bar and " Right Click " on the Undo Arrow - and see if there is a delete in the listing - if there is - You can undo back to that point - and recover Your Wing Thing.

If You Still have that Dazed Look in Your Eyes - and No Wing - You can check out Your Autoback file Which should be in Your Modeling Directory.

I know - I know - Some days we Just have More FUN Than others !!

Let us know how You make out ??

Johnman :) ;):cool:

Thanks! none of it worked though. luckely I still have a save from before adding the right wing. I'll rework from there and see if this happens again. ;)
 
By going back to that file where you have your left wing, you will loose all the work you have done on the right wing, you could just merge the left wing from this old file.
 
By going back to that file where you have your left wing, you will loose all the work you have done on the right wing, you could just merge the left wing from this old file.

No worries. The right wing wasn't that much effort yet anyway... I still had to add the details. Right now I've got it modeld back again and the problem seems to not have accured again...

Time to get the smooth the slats-edge though ;)

Knipsel8_zps8f05996d.png


Still thinking of a plan on how to do that.... :)
 
Last edited:
Hello F747fly,

I would Suggest going into Your Preferences - and Setting Your undo's up to a Hundred or so - and setting Your autobacks to every 10 minuets - and maybe a maximum of 10 or twenty - If You are anything like Me - Your Little fingers are not always where they are supposed to be - or doing what they are supposed to be doing !! :)

Good Luck - HAVE FUN - letusknowhowyerdoin !!

Johnman :cool:
 
Psssstttt,

A little hint - FSX/P3D get Really Squirrely - When You use modifiers like - MIRROR !!

ALSO - Set up and use the Process to move Your Model into the Flight Sim NOW - DON'T wait until You are all finished - Modeling - Animating - Texturing - CockPitting - Interioring - and then expect to just Slip it in and Go Flying :laughing: :laughing: - Don't work that way - start with a Sphere or a Cube - and get more complex - and get the system set up !! CHECK YOUR MODEL IN THE SIM - OOOFFFTENNN !! - When You get Your files and Programs set up - It takes about a Minuet - To Export - Compile - Load Your Model - and Get back to modeling !!

And MOST Important - HAVE FUN - and Enjoy OUR Incredible Hobby !

Johnman
 
Psssstttt,

A little hint - FSX/P3D get Really Squirrely - When You use modifiers like - MIRROR !!

Horsefeathers! o_O The problem starts when using the Mirror BUTTON on the toolbar, the Mirror modifier does what it says on the tin and doesn't of itself cause problems.


ALSO - Set up and use the Process to move Your Model into the Flight Sim NOW - DON'T wait until You are all finished...

I couldn't agree with you more! Export early, export often, test your work in the sim as you go along. :teacher:
 
Psssstttt,

A little hint - FSX/P3D get Really Squirrely - When You use modifiers like - MIRROR !!

ALSO - Set up and use the Process to move Your Model into the Flight Sim NOW - DON'T wait until You are all finished - Modeling - Animating - Texturing - CockPitting - Interioring - and then expect to just Slip it in and Go Flying :laughing: :laughing: - Don't work that way - start with a Sphere or a Cube - and get more complex - and get the system set up !! CHECK YOUR MODEL IN THE SIM - OOOFFFTENNN !! - When You get Your files and Programs set up - It takes about a Minuet - To Export - Compile - Load Your Model - and Get back to modeling !!

And MOST Important - HAVE FUN - and Enjoy OUR Incredible Hobby !

Johnman

Okay thanks! I'll export it first time tomorow! :) I also said my settings to the way you discribed earlier, but I didn't use mirror. I modeled the left and right sepperatly.
Anyway thanks for the tips! Thusfar I'm really enjoying it! I can't wait to take it just for a little spin tomorow! :)
 
Hey Hairyspin,
Thanks I'll have to try Mirror from the Modifier List - I have been Just Leaving the Dog Sleep !!

Johnman
 
Last edited:
And on another note, you should read up on how to work with Splines with Bezier Vertices (for adjusting, with handles) and learn to make shapes with them (like wind airfoils). You can create a Spline of a side Wing profile, then turn it into a Editable Poly, then extrude it several times. Then use a FFD to bring it to shape, wide at the root, thin at the tip. You can even make the sections seperately, then join them. For instance, make the aileron profile, then the wing profile, join them, then extrude the unit. Your ailerons/flaps are already built into the shape and will not be required to be cut out, only detached.

For simplicity, you can also make a tube for the leading edge, cut away the back half, then extrude the edges along the top and bottom to make the rest of the surfaces of the wing.

And like the guys said, never create both sides. Make one, clone it (from the tools menu, Edit/Clone), then add a Mirror to it from the tools flyout, flip it, then collapse stack and you have your other wing side. Same with fuselages. Do one side, then mirror and weld it on.
 
And on another note, you should read up on how to work with Splines with Bezier Vertices (for adjusting, with handles) and learn to make shapes with them (like wind airfoils). You can create a Spline of a side Wing profile, then turn it into a Editable Poly, then extrude it several times. Then use a FFD to bring it to shape, wide at the root, thin at the tip. You can even make the sections seperately, then join them. For instance, make the aileron profile, then the wing profile, join them, then extrude the unit. Your ailerons/flaps are already built into the shape and will not be required to be cut out, only detached.

For simplicity, you can also make a tube for the leading edge, cut away the back half, then extrude the edges along the top and bottom to make the rest of the surfaces of the wing.

And like the guys said, never create both sides. Make one, clone it (from the tools menu, Edit/Clone), then add a Mirror to it from the tools flyout, flip it, then collapse stack and you have your other wing side. Same with fuselages. Do one side, then mirror and weld it on.

That's actually also an interresting way to do it. Now I'm stuck with a square wing without airfoils because I draw it from the top, then extruded it and put in an FFD. I'll try the way you discibe it (it sound more logical coming to think of it). And you mean only clone the wings or the entire aircraft?
 
Also why does the FFD work on the wingtip but not on the aileron/flap edge when I aply it?

Knipsel9_zps3a2110e9.png


(also I must still possistion it a bit more to the top, can anyone tell me if scaping poly really works?)

I know this is not within this topics subject anymore, but I felt like I would be wasting a lot of people's time when I would open a new topic for this.
 
Back
Top