• Which the release of FS2020 we see an explosition of activity on the forun and of course we are very happy to see this. But having all questions about FS2020 in one forum becomes a bit messy. So therefore we would like to ask you all to use the following guidelines when posting your questions:

    • Tag FS2020 specific questions with the MSFS2020 tag.
    • Questions about making 3D assets can be posted in the 3D asset design forum. Either post them in the subforum of the modelling tool you use or in the general forum if they are general.
    • Questions about aircraft design can be posted in the Aircraft design forum
    • Questions about airport design can be posted in the FS2020 airport design forum. Once airport development tools have been updated for FS2020 you can post tool speciifc questions in the subforums of those tools as well of course.
    • Questions about terrain design can be posted in the FS2020 terrain design forum.
    • Questions about SimConnect can be posted in the SimConnect forum.

    Any other question that is not specific to an aspect of development or tool can be posted in the General chat forum.

    By following these guidelines we make sure that the forums remain easy to read for everybody and also that the right people can find your post to answer it.

Having objects display only during certain months?

Messages
687
Country
us-texas
I am finishing a very popular Aerodrome on the east coast and the request has been made to see if the static aircraft placed as display at this aerodrome can be made to show only from June to October (The months the Aerodrome is open to the public). Ideally having them show on display during those months and then show in their respective hangars the rest of the year. Is this even possible?
 
Hi Ed:

Conditional display of scenery objects can be achieved via (listed by increasing order of FPS hit):

1.) Batch files run from shortcuts on ex: Windows Desktop or Start Button > Programs sub-menu

a.) Rename ex: [Summer placement filename].BGL to [Summer placement filename].OFF

b.) Rename ex: [Winter placement filename].OFF to [Winter placement filename].BGL

c.) Run ex: [Ed's Famous East Coast Airport ICAO].FLT


NOTE: One can use a Saved Flight for each desired RWY, Parking etc. "Start Location" in different *.FLT files

When *.FLT file is run, FS launches directly to that Start Location, bypassing menus


2.) Use of a FSX MDL with a custom "Ed-Flow" Module to control display of objects by date via SimConnect :p

3.) Use of a FS9 MDL with Arno's "MDL Tweaker II" (and not his "CAT2k2") to control display of objects by date

4.) Use of a FSX MDL placed as FS Effect to control display of objects by date


There may of course be other ways to achieve conditional display of scenery objects which others may wish to share. ;)


BTW: I did not mention placing the scenery objects as Autogen with visible and invisible seasonal textures, as IIUC, making the object 'invisible' by season would add to the FPS hit at your airport by having 2 copies of the same complex 3D object(s) rendered (scaled at full size) in the scene: 1 set visible, and 1 set invisible.


Furthermore, the FS Autogen season transition date varies by FS region, and may not occur on the dates you are wanting to swap object placement locations (visibility) at the airport of interest.

However, if SAMM were used to make lower complexity aircraft and the "Crash Box" is disabled for the object MDLs, they might work OK and user pilot-able aircraft would simply pass through them when "invisible". :idea:


Static Aircraft Model Maker (aka "SAMM" ...Thanks Don ! ): http://www.fsdeveloper.com/forum/forumdisplay.php?f=114


Also, I did not mention creating AI traffic flight plans for the aircraft, as IIUC, this requires the aircraft to be flown between the main display airport and another designated airport at least weekly, and only has a "static" parking positional display in between scheduled flights.

FYI: This is the method used by Bill Womack and Holger Sandmann in Misty Fiords / Tongass Fiords, and used either visble or hidden airports as waypoints on AI flight plans for the AI aircraft.

When display of airport names is 'enabled' in the FSX Standard.XML file and set active during a flight, the AI way-point (invisible) airport labels appear at 1000 Ft. AGL along with other (visible) default and 3rd party airports.

Additionally, when AI traffic is enabled, if display of aircraft tail marker IDs is enabled, these are seen above both user-pilot-able aircraft, and AI aircraft which are being displayed during flights ...and in between flights when parked at an airport.


Hope these ideas help ! :)

GaryGB
 
Last edited:
Hi,

Option 3 should be using mdl tweaker tool, not CAT.

For which version of FS is this? For fs2004 it is quite easy to do this. For FSX it is much harder, but if your object has no transparent textures you could still use the fs2004 mdl format.
 
Hi,

Option 3 should be using mdl tweaker tool, not CAT.

For which version of FS is this? For fs2004 it is quite easy to do this. For FSX it is much harder, but if your object has no transparent textures you could still use the fs2004 mdl format.
Arno, this is for FSX and unfortunately it involves about 19 aircraft rendered as 3D objects and many of them do have windshields or canopies.
 
Hi,

Option 3 should be using mdl tweaker tool, not CAT.

Whoops... Sorry for the error; I hadn't had my 2nd cup of coffee yet this morning ! :o

Thanks, Arno, for the heads up to clarify the proper utility to be used (if FS9 MDL transparency displayed in FSX was not an issue). :)

GaryGB
 
Last edited:
Hi Ed:

Now that I've had too much coffee, my mind is pondering new ideas ! :stirthepo :eek:


I haven't tested this, but possibly one can achieve conditional display of scenery objects via a "Living World" method (which uses SimConnect to spawn objects into the FS world at run time), since in FSX, 'static' scenery objects and aircraft are both essentially "SimObjects": :idea:

http://www.fsdeveloper.com/forum/showpost.php?p=339169&postcount=5

In FSX there is no difference between the scenery and aircraft MDL format. So a conversion would not even be needed.


Thus, one might consider use of the Rhinebeck museum's 'static' aircraft scenery objects in question (which, if they are FSX native MDL scenery objects, are IIUC, "SimObjects") ...as Ground Vehicles.

If the static aircraft to be used at Old Rhinebeck are not FSX MDL format, with author permission maybe they could be converted to FSX format 'SimObjects' via ModelConverterX ? :confused:

Perhaps those Ground Vehicles might only be allowed to appear at a specified minimum of way-points based on certain dates, and to not 'move' (not taxi around on the ground like a typical AI traffic object) due to an assigned Speed of "0" knots. ;)


For details on this method, see Ron Haertel's manual for "Living World" v1.1 (or v1.2):

http://library.avsim.net/search.php?SearchTerm=Ron+Haertel&CatID=root&Go=Search


http://www.fsdeveloper.com/forum/forumdisplay.php?f=109


Hope this idea might prove feasible ! :)

GaryGB
 
Last edited:
Definitely worth looking into Gary. I've downloaded and will read it once I'm finished with the project. For now, I plan to go with 2 bgl's. One with the static aircraft on display as they would be during the Summer/Fall Seasons and another will show them in their respective hangers for the remaining time frame. Users can simply choose which bgl to use. It's the quickest and easiest option as my time is almost up to have this to the folks at GAS for final packaging.

Thanks all!!:)
 
Back
Top