FSX Landing lights placement...

[Skyways 1142]

I have installed a HP67 - Hastings aircraft that was initially designed for FS2002.

After an issue over the spinning props (black discs - now rectified) everything works as it should but I have one outstanding issue to do with placement of the landing lights.

They appear to be "behind" the wing!!!

The aircraft.cfg file gives the light data as:

HP67-Hastings
[LIGHTS]
//Types: 1=beacon, 2=strobe, 3=navigation, 4=cockpit
light.0=3, -4.4, -56.80, 0.60, fx_navred
light.1=3, -4.4, 56.80, 0.60, fx_navgre
light.2=3, -50.70, -0.05, 2.50, fx_navwhi
light.3=1, -41.00, 0.00, 20.45, fx_beacon

If 1 = beacon etc ..... what about landing lights? Only "beacon" and "navigation" modeled.

I note in the FSX default 737-800 cfg:

Def_737-800
[LIGHTS]
//Types: 1=beacon, 2=strobe, 3=navigation, 4=cockpit, 5=landing
light.0 = 3, -24.20, -56.60, 3.90, fx_navredm ,
light.1 = 3, -24.20, 56.60, 3.90, fx_navgrem ,
light.2 = 2, -71.32, 0.00, 5.92, fx_strobeh ,
light.3 = 2, -25.00, -57.20, 4.20, fx_strobe ,
light.4 = 2, -25.00, 57.20, 4.20, fx_strobe ,
light.5 = 2, -7.55, 0.00, -5.50, fx_beaconb ,
light.6 = 1, 2.00, 0.00, 8.70, fx_beaconh ,
light.7 = 4, 47.60, 0.00, 3.00, fx_vclighth ,
light.8 = 3, -29.50, -56.60, 3.70, fx_navwhih ,
light.9 = 3, -29.50, 56.60, 3.70, fx_navwhih ,

5=landing but NO landing lights are indicated through 0 - 9

Can anybody tell me where the landing lights details are given in text???

What I would like to do is bring the landing lights into their correct position.

It has to be quite straightforward I just can't see it right now.

OR - is it built into the model-file, perhaps?

Ken.

 

[n4gix]

Landing and Taxi lights are built into the model file. They cannot be moved or edited without the original source code.

 

[Skyways 1142]

Landing and Taxi lights are built into the model file. They cannot be moved or edited without the original source code.

Thanks,

my hunch was correct

I will learn to live with it

Ken.