• Which the release of FS2020 we see an explosition of activity on the forun and of course we are very happy to see this. But having all questions about FS2020 in one forum becomes a bit messy. So therefore we would like to ask you all to use the following guidelines when posting your questions:

    • Tag FS2020 specific questions with the MSFS2020 tag.
    • Questions about making 3D assets can be posted in the 3D asset design forum. Either post them in the subforum of the modelling tool you use or in the general forum if they are general.
    • Questions about aircraft design can be posted in the Aircraft design forum
    • Questions about airport design can be posted in the FS2020 airport design forum. Once airport development tools have been updated for FS2020 you can post tool speciifc questions in the subforums of those tools as well of course.
    • Questions about terrain design can be posted in the FS2020 terrain design forum.
    • Questions about SimConnect can be posted in the SimConnect forum.

    Any other question that is not specific to an aspect of development or tool can be posted in the General chat forum.

    By following these guidelines we make sure that the forums remain easy to read for everybody and also that the right people can find your post to answer it.

FSX Make rounded nose

Messages
53
Country
hongkong
I'm stuck in this situation, anyone can help me out?

I am using 3Ds Max 2014.

lqrh.png


cheers.
 
Select the front poly and choose inset.
Shrink the poly and move it forward.

Then do the same to the front poly again and again till the nose is round enough.
 
I'm not a student and cannot afford any new version of Max so just have to hang on to an old version so the layout are a bit different.

Point 1.
First select the front poly.


You need off course to be in "polygon mode" (see point 2)


Inset have two choices.

See point 3.
Selecting the first box you have to maually move the mouse to select amount of inset.
The second box with the "window symbol" on it you can enter any value you want to.
 

Attachments

  • Inset.jpg
    Inset.jpg
    163.5 KB · Views: 478
I'm not a student and cannot afford any new version of Max so just have to hang on to an old version so the layout are a bit different.

Point 1.
First select the front poly.


You need off course to be in "polygon mode" (see point 2)


Inset have two choices.

See point 3.
Selecting the first box you have to maually move the mouse to select amount of inset.
The second box with the "window symbol" on it you can enter any value you want to.

I got this student version for free because my school is registered in autodesk's school list :D Also i cant find the polygon mode :(
 
Pressing "4" on your keyboard toggles polygon mode, and you should see it highlight itself over on the edit poly panel. There are 5 sub-object modes on the edit poly panel: Vertex (1), edge (2), border (3), obviously polygon (4), and element (5). ;)
 
Pressing "4" on your keyboard toggles polygon mode, and you should see it highlight itself over on the edit poly panel. There are 5 sub-object modes on the edit poly panel: Vertex (1), edge (2), border (3), obviously polygon (4), and element (5). ;)

thanks. found it. However I dont know how to use inset tool.
 
Here's what I do.

Cap the front with a Polygon.
Select Poly (front Cap)
Extrude
Scale down
Repeat, Repeat, Repeat until you have a nice, rounded front.

If you only have one side, then select the front Edges and do the same; Extrude, Scale, Extrude, Scale, till done.

You can create a sphere, set count to match the fuselage, delete the back half, move into place, and Attach and then Weld the vertices together, but that can be a pain. Extrude/Scale is much faster.



Bill
 
You can also delete the front polygon, go into "Border" mode (The icon that looks like a Lima bean :laughing:) and hold down the Shift key while dragging it towards the nose tip. Then scale down, repeat, etc., then when you get to the very tip of the nose that you want to have closed off, just hit the "Collapse" button in the Edit Poly panel and it will form a point.
 
Both sides are not equal...

Thanks, I have solved the round surface :D but when I see the front, the lines are not symmetrical :(
a8v.png
 
First, in your case, you would select the top view, select a bulkhead of Vertices and squash them width wise until they are the proper width and go along the model adjusting the width till the fuselage is proper, front to rear.

Here is something I have learned to do. I make the fuselage in 'one side' only. I get all the way through the windows (cutouts and making of windows from the cutout pieces), then I make a copy of the fuselage and flip it (Mirror). I then Attach, Weld Vertices, Smooth, and done. One fuselage. You will have to wait to cut doors if doors are not on both sides. (Wait to cut them after you have both sides done with windows).

I also have the top and bottom edges of the fuselage (when in one half side only) to where they line up on the center line of the plane.


Bill
 
Bill is the master here! :D Make sure you have the model adjusted in the top view as well so you can see if there are any mistakes. Another thing you can do to center the object, so you don't have to worry about it being asymmetrycal, is when you create the part of your fuselage, (cylinder, sphere, whatever), is right-click either of the up and down arrows next to the box labeled "X" toward the bottom of the screen. It's the first of three boxes right under the animation time slider. That's what I do, and I don't have to fret about getting the fuselage on 0,0,0 for the mirror operation to work properly. ;) Makes modeling easier in that aspect.
 
Back
Top