• Which the release of FS2020 we see an explosition of activity on the forun and of course we are very happy to see this. But having all questions about FS2020 in one forum becomes a bit messy. So therefore we would like to ask you all to use the following guidelines when posting your questions:

    • Tag FS2020 specific questions with the MSFS2020 tag.
    • Questions about making 3D assets can be posted in the 3D asset design forum. Either post them in the subforum of the modelling tool you use or in the general forum if they are general.
    • Questions about aircraft design can be posted in the Aircraft design forum
    • Questions about airport design can be posted in the FS2020 airport design forum. Once airport development tools have been updated for FS2020 you can post tool speciifc questions in the subforums of those tools as well of course.
    • Questions about terrain design can be posted in the FS2020 terrain design forum.
    • Questions about SimConnect can be posted in the SimConnect forum.

    Any other question that is not specific to an aspect of development or tool can be posted in the General chat forum.

    By following these guidelines we make sure that the forums remain easy to read for everybody and also that the right people can find your post to answer it.

Max to Gmax export problems

Messages
54
Country
unitedstates
Hi everybody,

I just finished making my model in Max 2012 and exported it to Gmax (as a .3ds file). Everything is the same except for the flap, which is much larger than in the Max model, plus it is slightly rotated and skewed, which means that it is basically impossible to get it back into place. I want to know why this is happening.

Oh, and before you ask- the reason that I am exporting to Gmax is to do the texture mapping (I already have the md3 exporter for Gmax) and to export it to fs.
 
You're building for FS9 then? If not, the Prepar3D tools will export an FSX-compatible model from Max 2012 ... plus the mapping tools in Max are way better than gmax, so better do that in Max first.
 
Last edited:
You may need to reset the scale on your oversized flap in Max prior to exporting to .3ds format.
 
Well I tried to reset the scale and it didn't help.

The main reason that I was trying to export to gmax was that I knew how the whole process worked.

I would tex map then export as md3. Then open md3 in lithunwrap and build my tex map that way. Then I would pull it back into gmax and use the fsx gamepack plugin to export to fsx.

Problem now is that I can't go this route (because of the export issues), and would like to do the entire creation process in Max.

I don't want to spend any money (like on prepar3d), so how exactly should I go about doing this.
 
Hmm...odd that it is doing it to that one part.I have yet to experience something like this with my exports of .3ds to gmax...
 
Last edited:
Well I tried to reset the scale and it didn't help....I don't want to spend any money (like on prepar3d), so how exactly should I go about doing this.

Create a Dummy helper object and use Align to position it and align its pivot to match your flap. Next use Reset Xform on the misbehaving flap and collapse the stack when done: this can't be undone, so save a copy first. Finally use Align on the flap's pivot only to realign it with the dummy helper. The part should export fine now.

BTW the Prepar3D exporter and SDK are free downloads from Prepar3D. ;)
 
I would tex map then export as md3. Then open md3 in lithunwrap and build my tex map that way. Then I would pull it back into gmax and use the fsx gamepack plugin to export to fsx.

You don't need to buy a license to use the FREE Prepar3D SDK's export tools. Simply download and install them.

Then, you could simply use Max 2012's UVW Editor and export the bloody mesh directly to a mesh bitmap? :confused:

Tools/Render UVW Template, pick a filename and voila!
 

Attachments

  • MaxRenderUVW_01.jpg
    MaxRenderUVW_01.jpg
    99.8 KB · Views: 577
Create a Dummy helper object and use Align to position it and align its pivot to match your flap. Next use Reset Xform on the misbehaving flap and collapse the stack when done: this can't be undone, so save a copy first. Finally use Align on the flap's pivot only to realign it with the dummy helper. The part should export fine now.

Well I have to admit that I am sort of new to Max/gmax and have no idea how to do any of what you are talking about, so could you walk me through it?

BTW: I didn't take enough time to look at the prepar3d website before, but I went back and did find the SDK, which I have now downloaded.
 
If you set up the export tools for Max2012, then there's no need for GMax or LithUnwrap any longer.

Max's own UVW Templates are so much easier to create and use... :D
 
Hey Bill, could you be so kind as to explain that? I tried using the UVW unwrap in 3dsMax 2012, but for some reason or another I could never get it to line up correctly...
 
One of the (sometimes) useful things is to allow Max to automatically UVW Map your object for you. Simply add a UVW Unwrap modifier to the stack, open the Editor and then select Tools/Pack UVs.... :cool:
 
I haven't tried this yet, but if the object is mapped in 3dsMax, will it be also mapped when importing into Gmax?
 
Yes.

(Damn - "The message you have entered is too short. Please enter at least ten characters.")

Affirmative then.

Perhaps we should have a thread for "best ten-character posts".
 
Thanks....Too bad Makemdl cannot export directly from 3dsmax...

Makemdl.exe doesn't "export" from anything. It is a compiler, not an exporter!

The exporter is named FSModelExp.dle for FS9. For FSX it is named gmax_FSModelExp.dle (for GMax) and Max9_FSModelExp.dle (for Max9).

This is the veritable "fly in the ointment" because the only way to code a new export module requires the (expensive and now unobtainable) Autodesk Licensed Export SDK... :mad:
 
Well I have to admit that I am sort of new to Max/gmax and have no idea how to do any of what you are talking about, so could you walk me through it?

Okay. This crummy mockup has two flaps and I'm going to assume the red l_flap object has the same problem you describe. Watch all the settings outlined in red when you try this yourself, but make sure you save a copy before trying this - it's irreversible!

snap078.jpg


snap079.jpg


snap080.jpg



The dummy object is now a placemarker for the flap's pivot.


snap081w.jpg


snap082.jpg



That's the scale problem sorted, so all that remains is to realign the flap's pivot as it was before - the dummy object still retains that original alignment:-


snap083.jpg



The flap's scaling problem has been fixed and any animations applied to it should still work properly


Could I also recommend you try some of the tutorials supplied with Max. If you don't have them, you may have to download them from Autodesk, but they're worth their weight in chocolate biscuits - make use of them!
 
Now I am having another problem...

I got everything into Gmax alright (I had to Reset Xform on all of the parts of the wing). I then tried to export it as an mdl and I got an error message along with a failed export message. I spent a couple of hours messing around with it and found that I could successfully export an untextured model that I had made in Max, but then it would not work on the half textured model. I have attached a picture of the error message.

Any insight into this is greatly appreciated.
 

Attachments

  • Untitled-1.jpg
    Untitled-1.jpg
    94.7 KB · Views: 565
Back
Top