• Which the release of FS2020 we see an explosition of activity on the forun and of course we are very happy to see this. But having all questions about FS2020 in one forum becomes a bit messy. So therefore we would like to ask you all to use the following guidelines when posting your questions:

    • Tag FS2020 specific questions with the MSFS2020 tag.
    • Questions about making 3D assets can be posted in the 3D asset design forum. Either post them in the subforum of the modelling tool you use or in the general forum if they are general.
    • Questions about aircraft design can be posted in the Aircraft design forum
    • Questions about airport design can be posted in the FS2020 airport design forum. Once airport development tools have been updated for FS2020 you can post tool speciifc questions in the subforums of those tools as well of course.
    • Questions about terrain design can be posted in the FS2020 terrain design forum.
    • Questions about SimConnect can be posted in the SimConnect forum.

    Any other question that is not specific to an aspect of development or tool can be posted in the General chat forum.

    By following these guidelines we make sure that the forums remain easy to read for everybody and also that the right people can find your post to answer it.

Resample tool not working

Tekica123

Tekica123

Messages
994
Country
macedonia
Hey there,

Im working with Resample tool for first time, so im getting a bit confused.

Resample Info File: 'D:\Igri\Lockheed Martin\Prepar3D v4 SDK 4.5.13.32097\World\Terrain\ICAO_PR.inf'
[Source] Type = 'MultiSource'
[Source] NumberOfSources = 4
[Source1] Type = 'TIFF'
[Source1] SourceDir = '.'
[Source1] SourceFile = 'ICAO_50cm_PR.tif'
[Source1] Layer = 'Imagery'
[Source1] SamplingMethod = 'Gaussian'
[Source1] Channel_BlendMask = '6.0'
[Source1] NullValue = ',,,,0'
[Source1] ULXMAP = 25.514000
[Source1] ULYMAP = 35.036000
[Source1] XDIM = 0.000006
[Source1] YDIM = 0.000004
[Source1] Variation = 'March, April, May, June, July, August'
TIFFReadDirectory: Warning, D:\Igri\Lockheed Martin\Prepar3D v4 SDK 4.5.13.32097\World\Terrain\ICAO_50cm_PR.tif: wrong data type 1 for "XMLPacket"; tag ignored.
TIFFReadDirectory: Warning, D:\Igri\Lockheed Martin\Prepar3D v4 SDK 4.5.13.32097\World\Terrain\ICAO_50cm_PR.tif: wrong data type 7 for "RichTIFFIPTC"; tag ignored.
TIFFReadDirectory: Warning, D:\Igri\Lockheed Martin\Prepar3D v4 SDK 4.5.13.32097\World\Terrain\ICAO_50cm_PR.tif: unknown field with tag 34665 (0x8769) encountered.
[Source2] Type = 'TIFF'
[Source2] SourceDir = '.'
[Source2] SourceFile = 'ICAO_50cm_PR_wi.tif'
[Source2] Layer = 'Imagery'
[Source2] SamplingMethod = 'Gaussian'
[Source2] Channel_BlendMask = '6.0'
[Source2] NullValue = ',,,,0'
[Source2] ULXMAP = 25.514000
[Source2] ULYMAP = 35.036000
[Source2] XDIM = 0.000006
[Source2] YDIM = 0.000004
[Source2] Variation = 'September, October, November'
TIFFReadDirectory: Warning, D:\Igri\Lockheed Martin\Prepar3D v4 SDK 4.5.13.32097\World\Terrain\ICAO_50cm_PR_wi.tif: wrong data type 1 for "XMLPacket"; tag ignored.
TIFFReadDirectory: Warning, D:\Igri\Lockheed Martin\Prepar3D v4 SDK 4.5.13.32097\World\Terrain\ICAO_50cm_PR_wi.tif: wrong data type 7 for "RichTIFFIPTC"; tag ignored.
TIFFReadDirectory: Warning, D:\Igri\Lockheed Martin\Prepar3D v4 SDK 4.5.13.32097\World\Terrain\ICAO_50cm_PR_wi.tif: unknown field with tag 34665 (0x8769) encountered.
[Source3] Type = 'TIFF'
[Source3] SourceDir = '.'
[Source3] SourceFile = 'ICAO_50cm_PR_hw.tif'
[Source3] Layer = 'Imagery'
[Source3] SamplingMethod = 'Gaussian'
[Source3] Channel_BlendMask = '6.0'
[Source3] NullValue = ',,,,0'
[Source3] ULXMAP = 25.514000
[Source3] ULYMAP = 35.036000
[Source3] XDIM = 0.000006
[Source3] YDIM = 0.000004
[Source3] Variation = 'December, January, February'
TIFFReadDirectory: Warning, D:\Igri\Lockheed Martin\Prepar3D v4 SDK 4.5.13.32097\World\Terrain\ICAO_50cm_PR_hw.tif: wrong data type 1 for "XMLPacket"; tag ignored.
TIFFReadDirectory: Warning, D:\Igri\Lockheed Martin\Prepar3D v4 SDK 4.5.13.32097\World\Terrain\ICAO_50cm_PR_hw.tif: wrong data type 7 for "RichTIFFIPTC"; tag ignored.
TIFFReadDirectory: Warning, D:\Igri\Lockheed Martin\Prepar3D v4 SDK 4.5.13.32097\World\Terrain\ICAO_50cm_PR_hw.tif: unknown field with tag 34665 (0x8769) encountered.
[Source4] Type = 'TIFF'
[Source4] SourceDir = '.'
[Source4] SourceFile = 'ICAO_50cm_PR_lm.tif'
[Source4] Layer = 'Imagery'
[Source4] SamplingMethod = 'Gaussian'
[Source4] Channel_BlendMask = '6.0'
[Source4] NullValue = ',,,,0'
[Source4] ULXMAP = 25.514000
[Source4] ULYMAP = 35.036000
[Source4] XDIM = 0.000006
[Source4] YDIM = 0.000004
[Source4] Variation = 'Night'
TIFFReadDirectory: Warning, D:\Igri\Lockheed Martin\Prepar3D v4 SDK 4.5.13.32097\World\Terrain\ICAO_50cm_PR_lm.tif: wrong data type 1 for "XMLPacket"; tag ignored.
TIFFReadDirectory: Warning, D:\Igri\Lockheed Martin\Prepar3D v4 SDK 4.5.13.32097\World\Terrain\ICAO_50cm_PR_lm.tif: wrong data type 7 for "RichTIFFIPTC"; tag ignored.
TIFFReadDirectory: Warning, D:\Igri\Lockheed Martin\Prepar3D v4 SDK 4.5.13.32097\World\Terrain\ICAO_50cm_PR_lm.tif: unknown field with tag 34665 (0x8769) encountered.
Error: Channel source number 5 is out of bounds.
Error: Channel source number 5 is out of bounds.
Error: Channel source number 5 is out of bounds.
Error: Channel source number 5 is out of bounds.
[Destination] DestDir = '.'
[Destination] DestBaseFileName = 'ICAO_PR.bgl'
[Destination] LOD = 'Auto'
[Destination] UseSourceDimensions = 1
[Destination] CompressionQuality = 85
D:\Igri\Lockheed Martin\Prepar3D v4 SDK 4.5.13.32097\World\Terrain\ICAO_50cm_PR_hw.tif: 2453509887: Invalid strip byte count, strip 0.
GeoTIFF: read error.
D:\Igri\Lockheed Martin\Prepar3D v4 SDK 4.5.13.32097\World\Terrain\ICAO_50cm_PR_hw.tif: 2453509887: Invalid strip byte count, strip 0.
GeoTIFF: read error.
D:\Igri\Lockheed Martin\Prepar3D v4 SDK 4.5.13.32097\World\Terrain\ICAO_50cm_PR_hw.tif: 2453509887: Invalid strip byte count, strip 0.
GeoTIFF: read error.

And here is the INF file

[Source]
Type = MultiSource
NumberOfSources = 4

[Source1]
SourceDir = "."
SourceFile = "ICAO_50cm_PR.tif"
Type = TIFF
Layer = Imagery
ulxMap = 25.5140000000
ulyMap = 35.0360000000
xDim = 0.000006041995097961624
yDim = 0.00000449157642059756
NullValue = ,,,,0
SamplingMethod = Gaussian
Channel_BlendMask = 6.0
Variation = March, April, May, June, July, August

[Source2]
SourceDir = "."
SourceFile = "ICAO_50cm_PR_wi.tif"
Type = TIFF
Layer = Imagery
ulxMap = 25.5140000000
ulyMap = 35.0360000000
xDim = 0.000006041995097961624
yDim = 0.00000449157642059756
NullValue = ,,,,0
SamplingMethod = Gaussian
Channel_BlendMask = 6.0
Variation = September, October, November

[Source3]
SourceDir = "."
SourceFile = "ICAO_50cm_PR_hw.tif"
Type = TIFF
Layer = Imagery
ulxMap = 25.5140000000
ulyMap = 35.0360000000
xDim = 0.000006041995097961624
yDim = 0.00000449157642059756
NullValue = ,,,,0
SamplingMethod = Gaussian
Channel_BlendMask = 6.0
Variation = December, January, February

[Source4]
SourceDir = "."
SourceFile = "ICAO_50cm_PR_lm.tif"
Type = TIFF
Layer = Imagery
ulxMap = 25.5140000000
ulyMap = 35.0360000000
xDim = 0.000006041995097961624
yDim = 0.00000449157642059756
NullValue = ,,,,0
SamplingMethod = Gaussian
Channel_BlendMask = 6.0
Variation = Night


[Destination]
DestDir = "."
DestBaseFileName = "ICAO_PR.bgl"
LOD = Auto
CompressionQuality = 85
UseSourceDimensions = 1

Any help will be really appreciated.

Thanks in advance!

Cheers
 
Channel_BlendMask = 6.0 means [Source6] band 0 (the red channel) should be used as the blend mask. You only have 4 sources, resample can't find [Source6].
 
ount, strip 0.
GeoTIFF: read error.
D:\Igri\Lockheed Martin\Prepar3D v4 SDK 4.5.13.32097\World\Terrain\ICAO_50cm_PR_hw.tif: 2453509887: Invalid strip byte count, strip 0.
GeoTIFF: read error.
D:\Igri\Lockheed Martin\Prepar3D v4 SDK 4.5.13.32097\World\Terrain\ICAO_50cm_PR_hw.tif: 2453509887: Invalid strip byte count, strip 0.
GeoTIFF: read error.
D:\Igri\Lockheed Martin\Prepar3D v4 SDK 4.5.13.32097\World\Terrain\ICAO_50cm_PR_hw.tif: 2453509887: Invalid strip byte count, strip 0.
GeoTIFF: read error.
D:\Igri\Lockheed Martin\Prepar3D v4 SDK 4.5.13.32097\World\Terrain\ICAO_50cm_PR_hw.tif: 2453509887: Invalid strip byte count, strip 0.
GeoTIFF: read error.
D:\Igri\Lockheed Martin\Prepar3D v4 SDK 4.5.13.32097\World\Terrain\ICAO_50cm_PR_hw.tif: 2453509887: Invalid strip byte count, strip 0.
GeoTIFF: read error.
D:\Igri\Lockheed Martin\Prepar3D v4 SDK 4.5.13.32097\World\Terrain\ICAO_50cm_PR_hw.tif: 2453509887: Invalid strip byte count, strip 0.
GeoTIFF: read error.
D:\Igri\Lockheed Martin\Prepar3D v4 SDK 4.5.13.32097\World\Terrain\ICAO_50cm_PR_hw.tif: 2453509887: Invalid strip byte count, strip 0.
GeoTIFF: read error.
D:\Igri\Lockheed Martin\Prepar3D v4 SDK 4.5.13.32097\World\Terrain\ICAO_50cm_PR_hw.tif: 2453509887: Invalid strip byte count, strip 0.
GeoTIFF: read error.
D:\Igri\Lockheed Martin\Prepar3D v4 SDK 4.5.13.32097\World\Terrain\ICAO_50cm_PR_hw.tif: 2453509887: Invalid strip byte count, strip 0.
GeoTIFF: read error.
D:\Igri\Lockheed Martin\Prepar3D v4 SDK 4.5.13.32097\World\Terrain\ICAO_50cm_PR_hw.tif: 2453509887: Invalid strip byte count, strip 0.
GeoTIFF: read error.
D:\Igri\Lockheed Martin\Prepar3D v4 SDK 4.5.13.32097\World\Terrain\ICAO_50cm_PR_hw.tif: 2453509887: Invalid strip byte count, strip 0.
GeoTIFF: read error.
D:\Igri\Lockheed Martin\Prepar3D v4 SDK 4.5.13.32097\World\Terrain\ICAO_50cm_PR_hw.tif: 2453509887: Invalid strip byte count, strip 0.
GeoTIFF: read error.
D:\Igri\Lockheed Martin\Prepar3D v4 SDK 4.5.13.32097\World\Terrain\ICAO_50cm_PR_hw.tif: 2453509887: Invalid strip byte count, strip 0.
GeoTIFF: read error.
D:\Igri\Lockheed Martin\Prepar3D v4 SDK 4.5.13.32097\World\Terrain\ICAO_50cm_PR_hw.tif: 2453509887: Invalid strip byte count, strip 0.
GeoTIFF: read error.
D:\Igri\Lockheed Martin\Prepar3D v4 SDK 4.5.13.32097\World\Terrain\ICAO_50cm_PR_hw.tif: 2453509887: Invalid strip byte count, strip 0.
GeoTIFF: read error.
D:\Igri\Lockheed Martin\Prepar3D v4 SDK 4.5.13.32097\World\Terrain\ICAO_50cm_PR_hw.tif: 2453509887: Invalid strip byte count, strip 0.
GeoTIFF: read error.
D:\Igri\Lockheed Martin\Prepar3D v4 SDK 4.5.13.32097\World\Terrain\ICAO_50cm_PR_hw.tif: 2453509887: Invalid strip byte count, strip 0.
GeoTIFF: read error.
D:\Igri\Lockheed Martin\Prepar3D v4 SDK 4.5.13.32097\World\Terrain\ICAO_50cm_PR_hw.tif: 2453509887: Invalid strip byte count, strip 0.
GeoTIFF: read error.
D:\Igri\Lockheed Martin\Prepar3D v4 SDK 4.5.13.32097\World\Terrain\ICAO_50cm_PR_hw.tif: 2453509887: Invalid strip byte count, strip 0.
GeoTIFF: read error.
D:\Igri\Lockheed Martin\Prepar3D v4 SDK 4.5.13.32097\World\Terrain\ICAO_50cm_PR_hw.tif: 2453509887: Invalid strip byte count, strip 0.
GeoTIFF: read error.

This is spamming right now, and nothing else happens.
 
How was ICAO_50cm_PR_hw.tif last saved? Do you get any errors/warnings if you open it in PhotoShop, Photo Viewer, etc.? Do you have a ICAO_50cm_PR_hw.psd that you could export another ICAO_50cm_PR_hw.tif from?

What happens if you make a copy of your .inf and remove [Source3], will it compile now?
 
Im saving the files with default settings of TIF, I tried to discard the layers (there was no layers actually they were merged together), and now im trying as default settings, including the layers.

I dont have HW.psd Im working on the default psd, and just add the effects.

I tried to remove the source3, but source2 started doing the same thing, as the other sources.
 
1593347294052.png


Including the layer compression RLE
 
Hello:

Jim previously alerted us to not only the availability of an earlier version of PhotoShop for free download, but also some of the quirks of how it outputs certain file formats; what version are you using ? :scratchch


Here's a summary I put together regarding options seen in recent versions of GIMP: :pushpin:


FYI: Older and current versions of PhotoShop and GIMP can output *.BMP / *.TIF files which are not fully compatible with SDK Resample.


For SDK Resample compatibility in source images output by PhotoShop and GIMP, ensure 'output' options meet the following criteria: :pushpin:


When Day / Seasonal variation "visible" source images are 'Saved' as a 24-Bit color *.BMP, configure the file format with:

* "Run Length Encoded" (aka "RLE") NOT checked

* "Do NOT write color space information" checked

* "24-Bits" (R8 G8 B8) 'ticked'


When Blend and Water Mask 'data' source images are 'Saved' as a 8-Bit gray-scale '(256)-color-step' *.TIF, configure the file format with:

* NO compression, whether FAX - CCITT 3, Huffman Encoding, LZW, PackBits etc.

* RGB NOT CMYK

* NO ICC sRGB Color Space Profile Embedded

* Optimized NOT Custom Palette


Hope this helps a bit more. :)

GaryGB
 
Last edited:
Actually, I cant find a option to save my photoreal as BMP, there are only few items like TIF, PSB ...
 
What version of PhotoShop are you using ? :scratchch

Perhaps Jim may be able help you further if you answer his questions. ;)

I do not personally use PhotoShop (I use Corel PhotoPaint instead).

GaryGB
 
I'm using a much older version of PS, CS2, circa 2005 but it appears the .tif export settings are the same

CS2_tiff_settings.jpg


I just ran resample on one of mine, I always see the wrong data type 1 for "XMLPacket"; tag ignored and the unknown field with tag 34665 (0x8769) encountered warnings but I've never seen the "wrong data type 7 for "RichTIFFIPTC" warning. No idea if it's causing the actual problem you're experiencing though.

Code: 
D:\Projects\Mosquito_Island\PR\uscan1ftsources>"D:\Lockheed Martin SDK\Prepar3D
v4 SDK 4.5.13.32097\World\Terrain\resample.exe" mosquito_island_city_WGS84.inf
Lockheed Martin(R) api_strings 4.5.13.32097
(C) Lockheed Martin. All rights reserved.

Resample Info File: 'mosquito_island_city_WGS84.inf'
[Source] Type = 'MultiSource'
[Source] NumberOfSources = 3
[Source1] Type = 'TIFF'
[Source1] SourceDir = '.'
[Source1] SourceFile = 'mosquito_island_city_WGS84.tif'
[Source1] Layer = 'Imagery'
[Source1] Channel_LandWaterMask = '3.0'
[Source1] Channel_BlendMask = '2.0'
[Source1] NullValue = '0,0,0'
[Source1] ULXMAP = -127.175055
[Source1] ULYMAP = 48.277237
[Source1] XDIM = 0.000003
[Source1] YDIM = 0.000003
[Source1] Variation = 'Day'
TIFFReadDirectory: Warning, D:\Projects\Mosquito_Island\PR\uscan1ftsources\mosqu
ito_island_city_WGS84.tif: wrong data type 1 for "XMLPacket"; tag ignored.
TIFFReadDirectory: Warning, D:\Projects\Mosquito_Island\PR\uscan1ftsources\mosqu
ito_island_city_WGS84.tif: unknown field with tag 34665 (0x8769) encountered.
[Source2] Type = 'TIFF'
[Source2] SourceDir = '.'
[Source2] SourceFile = 'mosquito_city_blend_mask.tif'
[Source2] Layer = 'None'
[Source2] SamplingMethod = 'Gaussian'
[Source2] NullValue = ',,,,0'
[Source2] ULXMAP = -127.175055
[Source2] ULYMAP = 48.277237
[Source2] XDIM = 0.000003
[Source2] YDIM = 0.000003
TIFFReadDirectory: Warning, D:\Projects\Mosquito_Island\PR\uscan1ftsources\mosqu
ito_city_blend_mask.tif: wrong data type 1 for "XMLPacket"; tag ignored.
TIFFReadDirectory: Warning, D:\Projects\Mosquito_Island\PR\uscan1ftsources\mosqu
ito_city_blend_mask.tif: unknown field with tag 34665 (0x8769) encountered.
[Source3] Type = 'TIFF'
[Source3] SourceDir = '.'
[Source3] SourceFile = 'mosquito_city_water_mask.tif'
[Source3] Layer = 'None'
[Source3] SamplingMethod = 'Gaussian'
[Source3] NullValue = ',,,,0'
[Source3] ULXMAP = -127.175055
[Source3] ULYMAP = 48.277237
[Source3] XDIM = 0.000003
[Source3] YDIM = 0.000003
TIFFReadDirectory: Warning, D:\Projects\Mosquito_Island\PR\uscan1ftsources\mosqu
ito_city_water_mask.tif: wrong data type 1 for "XMLPacket"; tag ignored.
TIFFReadDirectory: Warning, D:\Projects\Mosquito_Island\PR\uscan1ftsources\mosqu
ito_city_water_mask.tif: unknown field with tag 34665 (0x8769) encountered.
[Destination] DestDir = 'D:\P3D v4 Addons\Mosquito Island\Scenery'
[Destination] DestBaseFileName = 'mosquito_island_photo_LOD17'
[Destination] LOD = 'Auto'
[Destination] DestFileType = 'BGL'
[Destination] UseSourceDimensions = 1
[Destination] CompressionQuality = 90
Cell 2603 of 2603 (100.00%); 0:00:51 elapsed, 0:00:00 remaining...

Elapsed time: 00:00:51

Compression statistics:

Method:  LZ1 Compressed
Blocks:  2
Ratio:   30.9 : 1

Method:  Delta And LZ1 Compressed
Blocks:  9
Ratio:   64.2 : 1

Method:  BitPack Compressed
Blocks:  1
Ratio:   58.5 : 1

Method:  BitPack And LZ1
Blocks:  13
Ratio:   69.5 : 1

Method:  PTC
Blocks:  764
Ratio:   7.0 : 1

Totals:
Blocks: 789
Ratio:  7.1 : 1

Resample completed successfully.

I did a quick google search and found this thread, specifically the last post:

https://www.imagemagick.org/discour...&sid=a143b0b5436aa7841be0cc273201033f#p159196

...so I'm wondering if you were to open your .tif in PS (or something else maybe) and save a copy as .bmp, then open the .bmp and save it back to .tif if it would strip the RichTIFFIPTC BS and allow it to compile?
 
I'm not sure if this may prove useful, but considering where the error message Jim cited immediately above occurs within the ASCII strings one sees in SDK Resample program code, it seems TIFF file related.

https://www.fsdeveloper.com/forum/threads/what-does-resample-exe-do.436204/post-733113


One might wonder if a proprietary file and/or compression format such as "BigTIFF" or "JPEG-in-TIFF" is being used by the OP for working with very large images ...which is incompatible with SDK Resample ? :scratchch

TIFF - Wikipedia

en.wikipedia.org en.wikipedia.org

TIFF File Format FAQ

TIFF File Format FAQ
www.awaresystems.be

GaryGB
 
Last edited:
Actually, I tried to export the same photoreal as my mate did, but didnt succeed, he also don't know what is the problem.Im wondering if I can export the 30000x2px image as BMP, but seems like I cant.
 
Tekica123 said:
Im wondering if I can export the 30000x2px image as BMP, but seems like I cant.
Click to expand...
30000x2px? How big is it really? I did one that was 21368x24077px and usually I embed the blend and water masks as alpha channels in the .tif but at that size it was way beyond 2 Gb which if I'm not mistaken is the limit on .tif.

I couldn't remember the exact error so I just exported the above with both alpha channels intact and reproduced your errors above:

Code: 
E:\_Orbx\1S1 Porthill\PR\2_orthoimage_USGS2009_CAJ3_Rykerts_60cm\Rykerts_60cm_pr
ocessed.tif: 2572386680: Invalid strip byte count, strip 0.
GeoTIFF: read error.
E:\_Orbx\1S1 Porthill\PR\2_orthoimage_USGS2009_CAJ3_Rykerts_60cm\Rykerts_60cm_pr
ocessed.tif: 2572386680: Invalid strip byte count, strip 0.
GeoTIFF: read error.
E:\_Orbx\1S1 Porthill\PR\2_orthoimage_USGS2009_CAJ3_Rykerts_60cm\Rykerts_60cm_pr
ocessed.tif: 2572386680: Invalid strip byte count, strip 0.
GeoTIFF: read error.
E:\_Orbx\1S1 Porthill\PR\2_orthoimage_USGS2009_CAJ3_Rykerts_60cm\Rykerts_60cm_pr
ocessed.tif: 2572386680: Invalid strip byte count, strip 0.
GeoTIFF: read error.
E:\_Orbx\1S1 Porthill\PR\2_orthoimage_USGS2009_CAJ3_Rykerts_60cm\Rykerts_60cm_pr
ocessed.tif: 2572386680: Invalid strip byte count, strip 0.
GeoTIFF: read error.
E:\_Orbx\1S1 Porthill\PR\2_orthoimage_USGS2009_CAJ3_Rykerts_60cm\Rykerts_60cm_pr
ocessed.tif: 2572386680: Invalid strip byte count, strip 0.

Do you get a warning like this from PS when you export it as .tif?

CS2_tiff_size_warning.jpg


I think it's simply too big, you'll need to crop it down or split into smaller parts. ...and redo your .inf.
 
You're absolutely exceeding the size limit. I get 2.28 Gb out of a file that size. You'll never be able to export it to anything resample can use for less than 2Gb. You have no choice but to cut it down or split it up.
 
How did you come up with the imagery in the first place? And how did you come up with ulxMap, ulyMap, xDim, and yDim for your .inf? Whatever you did there you'll need to do it again except this time either cut it down to a smaller piece or split it up into multiple images. I use OSGeo4W/gdalwarp to do that, and then GeoTiffToInf to get the numbers for the .inf.
 
You must log in or register to reply here.
Back
Top