• Which the release of FS2020 we see an explosition of activity on the forun and of course we are very happy to see this. But having all questions about FS2020 in one forum becomes a bit messy. So therefore we would like to ask you all to use the following guidelines when posting your questions:

    • Tag FS2020 specific questions with the MSFS2020 tag.
    • Questions about making 3D assets can be posted in the 3D asset design forum. Either post them in the subforum of the modelling tool you use or in the general forum if they are general.
    • Questions about aircraft design can be posted in the Aircraft design forum
    • Questions about airport design can be posted in the FS2020 airport design forum. Once airport development tools have been updated for FS2020 you can post tool speciifc questions in the subforums of those tools as well of course.
    • Questions about terrain design can be posted in the FS2020 terrain design forum.
    • Questions about SimConnect can be posted in the SimConnect forum.

    Any other question that is not specific to an aspect of development or tool can be posted in the General chat forum.

    By following these guidelines we make sure that the forums remain easy to read for everybody and also that the right people can find your post to answer it.

FSX Smoothing & Welding

Messages
1,101
Country
unitedkingdom
Hi guys,

I'm currently modelling an AN-140 as in the image below;

http://ivmp.files.wordpress.com/2007/11/1271654.jpg

Everything is working out well and am at a stage where I want both halfs of the fuselage to be welded togeather and smoothed out.

I've been working on just one side and have now mirrored the other.

From what I understand, the procedure is to take the left hand side fuselage, attach the right in the polygon sub menu, then weld the center vertices togeather. Simple enough as it sounds, i've attached the two, but when it comes to welding, i'm just getting "No weldable vertices within threshold"

I've adjusted the size of the threshold to 25m and even higher but still no joy and the mirrored object has been coverted to a editable poly.

At the moment there is a crease down the center for the windshield, but in reality the entire wieldshield is one big curved poly;

http://southwestdesign.org.uk/Progress6.jpg

http://southwestdesign.org.uk/Progress7.jpg

http://southwestdesign.org.uk/Progress8.jpg

http://southwestdesign.org.uk/Progress9.jpg

http://southwestdesign.org.uk/Progress10.jpg

I also need to weld the fuselage to the windsheild but that's not allowing it either!

The export test showed the windows horrid, despite being smooth in GMAX;

http://southwestdesign.org.uk/Progress11.jpg

Where'as it should look like this;

http://ram-home.com/ram-old/an-140-andy-b.jpg

http://3.bp.blogspot.com/_rUHyHq68ak0/SQ0nIv1lRtI/AAAAAAAAU6Q/JY4tId-6Yh4/s1600-h/An-140-6b.jpg

I'm quite pleased with what i've done so far, but any help or opinions are appreciated please.

Thanks.
 
Last edited:
How did you Mirror the other half? If you used the Mirror icon on the top toolbar, that was a Big Mistake.

You must clone the modeled half, then add a "Mirror Modifier" to the stack of the cloned object, then collapse to e-mesh or e-poly.
 
Did the later there Bill, clone, mirror modifier then edit poly.

If I convert both to an edit mesh then they weld OK, but it also adds alot of horrid edges in the windows :mad:
 
Okay.

Use Top Down View, then very carefully select ONLY the common vertices along the seam...

Set the Weld Threshold to 0.01, then click on Weld.

This way you won't collapse/weld any other vertices that're at or below that threshold distance (such as around your windows).
 
Hey Piran,

You can be in either Editable Poly or Editable Mesh model type, and go to Vertice mode, select the inner strip of Vertices along the join seam, weld those.


Your model is coming along nicely.
 
Threshold set to 0.01m, vertices on the windshield selected, but still no joy!

I've just rebuilt the entire fuselage and windows. It's taken 2 hours!
 
It can be time consuming, but the fun comes later and is worth it.


With Editable Poly models, you usually will have issues welding Vertices. But with changing it to a Editable Mesh, the issues go away and Vertices weld up fine.


Remember, forwards to rearwards welding of Vertices will usually not work. Vertices face a direction. Trying to weld back to front will not work. Must be face to face, not face to rear Polygons.

Adding Edges into the middle of large Polygons that have many many edge sides will help to keep it from having 'hang over' sides when you have arcs that are inward into the model. (Hard to explain).



Bill
 
Your progress shots show the two halves together but this hides anything that's in between.

Hide the right side of the fuselage and look at the left side - from the Right viewport view. Is there a big poly or set of polys closing off the right hand side of this half of the model? That will stop vertices welding - you can only weld together open-ended geometry.

It's like welding together two 45-gallon oil drums. Butt the ends together and weld 'em and you still have two 45-gallon oil drums. Cut an end out of each, butt the open ends together and weld 'em and you have one 90-gallon oil drum.

Hope this helps.
 
About this cloning method

one of the most important things i have found is that before i delete or cloned the sides i make double sure i have the pivot point set EXACTLY on the axis i am gointo to mirror from. For instance on the fuselage i hit "affect pivot point only" click the "move" modifier and type ZERO (0) in the x window at the bottom of the page. Then after i clone and mirror i go to vertex mode and select all the vertexes on the x axis and set weld to .004. If i see a set of top polies that are not smooth i go to max zoom and see whats up. sometimes i have a vertex that i missed. always have to clean up those vertexes because sometimes you get isolated vetexes. That is what this sounds like. Maybe you cut down the center or used slice plane? instead of just outright deleting the polies in editable mesh or editable poly. You can delete vertices too which works better sometimes.that way you can only delete whats on the south side of the lins and see what vertices are messed up along the bottoms and tops. After i complete deleting a side i also go back and make sure all my vertexes are aligned perfectly on the axis line. This always helps maintaining the shapes on top/bottom. And it gives me a chance to look for back facing polies from where i might have moved a vertici inadvertently.
 
Last edited:
Back
Top