• Which the release of FS2020 we see an explosition of activity on the forun and of course we are very happy to see this. But having all questions about FS2020 in one forum becomes a bit messy. So therefore we would like to ask you all to use the following guidelines when posting your questions:

    • Tag FS2020 specific questions with the MSFS2020 tag.
    • Questions about making 3D assets can be posted in the 3D asset design forum. Either post them in the subforum of the modelling tool you use or in the general forum if they are general.
    • Questions about aircraft design can be posted in the Aircraft design forum
    • Questions about airport design can be posted in the FS2020 airport design forum. Once airport development tools have been updated for FS2020 you can post tool speciifc questions in the subforums of those tools as well of course.
    • Questions about terrain design can be posted in the FS2020 terrain design forum.
    • Questions about SimConnect can be posted in the SimConnect forum.

    Any other question that is not specific to an aspect of development or tool can be posted in the General chat forum.

    By following these guidelines we make sure that the forums remain easy to read for everybody and also that the right people can find your post to answer it.

Suspension

S

Southwest

Messages
1,101
Country
unitedkingdom
Hi All,

if i wish to add suspension to my aircraft say, when it lands. In my ''Contact Points'' section what is it that has to be changed or modified. I have attached the contact points lines:

[contact_points]
point.0= 1.000, 12.110, 0.000, -4.650, 1600.000, 0.000, 0.595, 55.000, 0.200, 6.000, 0.650, 9.500, 8.000, 0.000, 0.000, 0.000
point.1= 1.000, -2.166, -9.984, -5.325, 1600.000, 1.000, 1.202, 0.000, 0.675, 2.000, 0.800, 8.500, 9.000, 2.000, 0.000, 0.000
point.2= 1.000, -2.166, 9.984, -5.325, 1600.000, 2.000, 1.202, 0.000, 0.675, 2.000, 0.800, 10.000, 7.250, 3.000, 160.000, 2462701986.053
point.3= 2.000, 18.054, 0.000, -1.073, 800.000, 0.000, 0.000, 0.000, 0.000, 0.000, 0.000, 0.000, 0.000, 5.000, 0.000, 0.000
point.4= 2.000, -22.713, 25.833, -0.521, 800.000, 0.000, 0.000, 0.000, 0.000, 0.000, 0.000, 0.000, 0.000, 5.000, 0.000, 0.000
point.5= 2.000, -0.849, -25.705, -0.849, 800.000, 0.000, 0.000, 0.000, 0.000, 0.000, 0.000, 0.000, 0.000, 5.000, 0.000, 0.000
point.6= 2.000, -0.849, 25.705, -0.849, 800.000, 0.000, 0.000, 0.000, 0.000, 0.000, 0.000, 0.000, 0.000, 5.000, 0.000, 0.000
point.7= 2.000, 0.890, -8.985, -0.941, 800.000, 0.000, 0.000, 0.000, 0.000, 0.000, 0.000, 0.000, 0.000, 5.000, 0.000, 0.000
point.8= 2.000, 0.890, 8.985, -0.941, 800.000, 0.000, 0.000, 0.000, 0.000, 0.000, 0.000, 0.000, 0.000, 5.000, 0.000, 0.000
point.9= 2.000, 1.211, 0.000, -1.595, 800.000, 0.000, 0.000, 0.000, 0.000, 0.000, 0.000, 0.000, 0.000, 5.000, 0.000, 0.000
static_pitch= -0.655
static_cg_height= 4.433
gear_system_type=0

Many thanks for any help.....
 
Hi,

For more info check the Sim Object SDK aircraft configuration files.
Modify entries 9 and/or 10 and/or 11, being in your case 0.200, 6.000, 0.650 for point=0 etc.

Roby
 
Firstly, many thanks for the reply....

Im not quite sure i follow though, were exactly is the Sim Objects SDK you mentioned?

So what yor saying is ''0.200, 6.000, 0.650'' is waht i edit?

Many Thanks once again...
 
You must log in or register to reply here.
Back
Top