• Which the release of FS2020 we see an explosition of activity on the forun and of course we are very happy to see this. But having all questions about FS2020 in one forum becomes a bit messy. So therefore we would like to ask you all to use the following guidelines when posting your questions:

    • Tag FS2020 specific questions with the MSFS2020 tag.
    • Questions about making 3D assets can be posted in the 3D asset design forum. Either post them in the subforum of the modelling tool you use or in the general forum if they are general.
    • Questions about aircraft design can be posted in the Aircraft design forum
    • Questions about airport design can be posted in the FS2020 airport design forum. Once airport development tools have been updated for FS2020 you can post tool speciifc questions in the subforums of those tools as well of course.
    • Questions about terrain design can be posted in the FS2020 terrain design forum.
    • Questions about SimConnect can be posted in the SimConnect forum.

    Any other question that is not specific to an aspect of development or tool can be posted in the General chat forum.

    By following these guidelines we make sure that the forums remain easy to read for everybody and also that the right people can find your post to answer it.

FSXA Tailhook

Messages
466
Country
us-california
Hi,

I've been having trouble getting a tailhook to animate. I've done some research and have found very little solid information on the system. I see that two attach points are needed, tailhook_hook and tailhook_pivot. I started off trying to get the tailhook_pivot to work. According to what I've read, you have to open the attach point tool, check Empty, and fill in the name of the attach point (in this case tailhook_pivot). After that, it states to open the Object Properties and remove the _n (any number added to the end). I've done all of this, yet during compilation, get the following error:

Code:
crash tree calculation failed

  at ManagedCrashTree.CalculateTree() 
  at ModelProcessingContext.BuildCrashTree() 
  at ModelProcessingContext.Optimize() 
  at <GetFileProcessor>d__0.MoveNext() 
  at FileExporter.OutputModels(IEnumerable ProcessedModels) 
  at XToXmlLib.OutputModels(IEnumerable`1 processedModels) 
  at XToXmlLib.ProcessAllFiles() 
  at XToXmlLib.Process(ModelFile[] InputFiles, Hashtable[] AnimationLinkage, String[] AnimationFileRef, XPartDict PartDictionary) 
  at XToMDL.ProcessInputs() 
  at XToMDL.RealMain(String[] args) 
  at XToMDL.Main(String[] args)

Is what I read wrong/missing a step?

Thanks,
Brandon
 
If you're using Max I can send you a file with the two attachpoints all set up. If you're using gMax I might be able to if I can find the files still...
 
Hey Guys,

I understand the PM'ing thing - but what happens is that any body else who is interested in the subject is left out of any solution - Please let the rest of us know what is going on !!

Johnman
 
I think I know what the problem is. The tailhook has 'settings' in contact points. If you are on the ground and it doesnt work, but in the air, it is fine, then raise up the contact points in the aircraft config.
 
Relevant xkcd.

wisdom_of_the_ancients.png
 
I think I know what the problem is. The tailhook has 'settings' in contact points. If you are on the ground and it doesnt work, but in the air, it is fine, then raise up the contact points in the aircraft config.

Bill, if you use the attach points the contact points are irrelevant, as long as you comment them out in the aircraft.cfg. Oddly if you use contact points the hook end won't go below the surface the aircraft is on, whereas if you use contact point the hook just uses the full animation range.

Brandon's compilation problem seemed to be related to having just the attachpoints in the file when exporting. If anyone else wants the attachpoints in a max file let me know!

DenverCoder9 saw things man...
 
Oddly if you use contact points the hook end won't go below the surface the aircraft is on, whereas if you use contact point the hook just uses the full animation range.
You said contact points both times -- did you mean attach points for the former instance (i.e. where the hook doesn't go below the surface)?
 
Skippy is right in that my export issue was related to there being too few/small parts in the export (as I was just exporting the tailhook and attach points.

I've not worked with attach points in a long time. I forgot that what ever object has the attach point does not show up in-sim. So my issue was that I tagged the tailhook object itself with the pivot attach point. After exporting more parts and creating a dummy object for the tailhook pivot attach point, everything worked just fine.

Thanks for your help, Skippy!
 
You said contact points both times -- did you mean attach points for the former instance (i.e. where the hook doesn't go below the surface)?

Yes, yes I did....

Honestly you can never check your posts enough times before pressing 'Post Reply'!
 
Back
Top