- Messages
- 10,158
- Country

Hey all,
On my present project with a turboprop engine, I suddenly cannot get the plane to start. It started fine before, last week, but now, for some reason, it just will not ignite during the spoolup.
I usually have 50% on condition lever, about 10% throttle, battery on, ignition swith on either 'on' or 'auto' (I try both), fuel selector to 'all',
Nothing in Behaviors / Systems shows an issue. Things that should turn green turn green. I wonder what it could be?
This is my Apron flt file engine section;
[Engine Parameters.1.0]
ThrottleLeverPct=0
PropellerLeverPct=0
MixtureLeverPct=0
Pct Engine RPM=0
MaxReachedEngineRPM=2454.7394303494743326
LeftMagneto=False
RightMagneto=False
GeneratorSwitch=False
FuelValveOpen=True
CowlFlapPct=0
FuelPumpSwitch=False
FuelPumpSwitch_EX1=0
CarbHeat/DeiceSwitch=False
EngineMasterSwitch=True
GlowPlugTemperaturePct=1
IgnitionSwitch=1
On my present project with a turboprop engine, I suddenly cannot get the plane to start. It started fine before, last week, but now, for some reason, it just will not ignite during the spoolup.
I usually have 50% on condition lever, about 10% throttle, battery on, ignition swith on either 'on' or 'auto' (I try both), fuel selector to 'all',
Nothing in Behaviors / Systems shows an issue. Things that should turn green turn green. I wonder what it could be?
This is my Apron flt file engine section;
[Engine Parameters.1.0]
ThrottleLeverPct=0
PropellerLeverPct=0
MixtureLeverPct=0
Pct Engine RPM=0
MaxReachedEngineRPM=2454.7394303494743326
LeftMagneto=False
RightMagneto=False
GeneratorSwitch=False
FuelValveOpen=True
CowlFlapPct=0
FuelPumpSwitch=False
FuelPumpSwitch_EX1=0
CarbHeat/DeiceSwitch=False
EngineMasterSwitch=True
GlowPlugTemperaturePct=1
IgnitionSwitch=1