Hi,
You may know that José and I have a close relationship

, so I know why he asks this question.
As a matter of fact I sent him some screenshots of a ferry (which he so graciiously provided the Gmax rotating radars for) but he was a bit disappointed in the water aspect.
I guess he has not seen my new pics yet because there I have changed the aspect of the water with FSWC (and something more

).
Moreover, and that is in fact the reason for my interfering here, I was not pleased yet with the wave action of FSWC because the waves were still flat and a pilotable or sim object boat would glide through it as if there were no waves at all.
And then I wondered if I could put in some altitude differences in the seas so as to have at least some bobbing and pitching and rolling.
Well, I have a solution but that brings on other problems.
I found that by putting in an extra fictitious airport in the vessel's sailing area and adding(only) some water apron paths at the altitude of this extra airport, the vessels (both the sim objects as well as the pilotable ones) have a heck of a time to plough into the waves and redress themselves pitching up and rolling and pitching down and almost sink.
And that in fact is what I am trying to get right: the exaggerated pitching and rolling of the vessels when they encounter these altitude differences.
For that I think I would need somebody more experienced in handling contact points and .air files to remedy this although I am working on it and have come to the point that they no longer sink or disappear or make somersaults.
But their reaction to the waves is still exaggerated by much.
I humbly think it worthwhile to experiment further in this respect but with the help of knowledge people.
See my screenshot so that you have an inkling of what I am talking about.
Roby
PS I had to change the mesh complexity to 78m to get a good rendition of the 3m high waves.