• Which the release of FS2020 we see an explosition of activity on the forun and of course we are very happy to see this. But having all questions about FS2020 in one forum becomes a bit messy. So therefore we would like to ask you all to use the following guidelines when posting your questions:

    • Tag FS2020 specific questions with the MSFS2020 tag.
    • Questions about making 3D assets can be posted in the 3D asset design forum. Either post them in the subforum of the modelling tool you use or in the general forum if they are general.
    • Questions about aircraft design can be posted in the Aircraft design forum
    • Questions about airport design can be posted in the FS2020 airport design forum. Once airport development tools have been updated for FS2020 you can post tool speciifc questions in the subforums of those tools as well of course.
    • Questions about terrain design can be posted in the FS2020 terrain design forum.
    • Questions about SimConnect can be posted in the SimConnect forum.

    Any other question that is not specific to an aspect of development or tool can be posted in the General chat forum.

    By following these guidelines we make sure that the forums remain easy to read for everybody and also that the right people can find your post to answer it.

FSX Window Transparency Problem (FSDS)

Messages
4
Country
us-virginia
Greetings all,

I'm currently working on updating the HC Bell 412 in FSDS. When the model is compiled into FSX, items inside the cabin, including the interior doors disappear when looking at them through the exterior windows. I had this same problem when working with the Jordan Moore Blackhawk and I was able to over come it, I just can't remember how I did it. If this topic has already been discussed, I apologize. I have reviewed almost every post on this site and have not found an answer.
NYPDBell4121.jpg

I have tried copying the doors, deleting them, and then pasting them back onto the model in different orders with no success. Any help would be much appreciated.


I'm also having trouble with the rotorblur transparencies, they are showing when they shouldn't be.
NYPDBell4122.jpg
 
Make sure that the part has at least a little transparency in the Material. It can't be totally opaque and rely only on the alpha channel. Even 1% transparent is fine.
 
Hi Hill Viking!



I have had that problem before. I fixed it by selecting all the interior faces that were giving me the problems and then recalculating all the normals for interior. (I am using Blender 2.70) if you are using Gmax or 3DS Max just flip the normals.

After I flipped the normals I did not have that problem any more.

I know that when I used Gmax to make models, I ran into that problem, if I created an object by creating verts to copy a shape then creating the faces, and finally extrude the object. The only way I found to fix the problem was to remake the object using a primitive.

I hope this helps.

Krispy1001
 
Hi
you need to re-order your draw order in fsds....damn if I cant remember the correct order its been sooo long :) but make sure all the parent parts the glass is attached to are I think first with all glass parts last...
From dark recesses of my memory (so expect red herrings ;) )..you goto part tab create part file merge list...save as somethingorother.txt(names unimportant just something you will remember) into a temp folder.....then open the text file in notepad and move the glass parts to the bottom of the list..
then back in fsds delete all the parts in the project so you have a clean work space, then file merg project then select the text fie you edited then ok....the model will be rebuilt with the new order....try a compile and see if that works...Im pretty sure you dont have to do this if using fsdstweak for compiling....as I said its been a long time :)
 
Thanks for advice, I tried doing as you said and thus far I've had no luck. I knew I remembered that it had to do with the order of objects but I can't remember the right order. I've tried placing the objects in several different orders and I've seen no changes in the windows. All of the interior transparencies are still missing when looking through the cabin doors. The closest I came was the interior of the Cabin Sliding doors finally appeared when looking through the windshield, but I changed the order and they disappeared again.
 
I've spent most of the day changing the order of the door and window transparencies in as many different patterns as I can think of and not one of them managed to make the interior cabin doors appear when looking at them through the exterior windows. I've made sure that there are no items using the interior doors as a parent part. I've checked to make sure they are using a transparent material and that I have checked off that the part is using transparent textures. I'm almost out of ideas.
Here is the way the current parts list appears. If anyone has any other ideas or can suggest a different way to order the parts in order to make this work it would be much appreciated. Unfortunately, this problem is holding up several projects I want to work on.

412_offshore_NYPD_414.mat
FuseMain.fsp
VerticalStab.fsp
FuseTailRotorShaft.fsp
NacelleLower.fsp
FuseMain.fsp
VerticalStab.fsp
FuseTailRotorShaft.fsp
NacelleLower.fsp
NacelleTop.fsp
HorizStab.fsp
NacelleTopTOP.fsp
CabinFrontWallTop.fsp
CabinFloor.fsp
CabinFrontWallBottom.fsp
CabinWallBack.fsp
CabinCeiling.fsp
TransmissionHousing.fsp
Seat.1.fsp
OilCoolerRight.fsp
OilCoolerLeft.fsp
OilCoolerRear.fsp
IntakeBottom.fsp
NacelleIntake.1.fsp
ExhaustRight.fsp
ExhaustLeft.fsp
RollBraceRight.fsp
RollBraceLeft.fsp
SkidStrutFrontRight.fsp
SkidStrutFrontLeft.fsp
SkidStrutBackRight.fsp
SkidStrutBackLeft.fsp
Stinger.fsp
BeaconNacelle.fsp
BeaconNacelleLight.fsp
AntennaTopNacellRearRight.fsp
AntennaTopNacellRearLeft.fsp
RearSideAntRight.fsp
RearSideAntLeft.fsp
SkidRight.fsp
FloatsLeft.fsp
SkidLeft.fsp
FloatsRight.fsp
MainRotorShaft.fsp
MainRotorHeadTop.fsp
prop0_still.MainRotorHead.fsp
prop0_slow.MainRotorHead.fsp
prop0_blurred.MainRotorHead.fsp
lever_collective.MainRotorBlades.fsp
prop0_still.MainRotorBladesParent.fsp
lever_collective.MainRotorBlades.1.fsp
lever_collective.MainRotorBlades.2.fsp
lever_collective.MainRotorBlades.3.fsp
lever_pedals_l_r.TailRotorBlade.fsp
prop0_still.TailRotorHubParent.fsp
lever_pedals_l_r.TailRotorBlade.1.fsp
TailRotorAxel.fsp
TailRotorTransmission.fsp
TailRotorVertDriveShaft.fsp
door_passenger.SkidStepRight.fsp
door_passenger.SkidStepBraceFowardRight.fsp
door_passenger.SkidStepBraceRearRight.fsp
SkidStepPlatformRight.fsp
door_passenger.SkidStepRightLiftBrace.fsp
door_passenger.SkidStepLeft.fsp
door_passenger.SkidStepBraceFowardLeft.fsp
door_passenger.SkidStepBraceRearLeft.fsp
SkidStepPlatformLeft.fsp
door_passenger.SkidStepLeftLiftBrace.fsp
SkidStrutWireRing.fsp
SkidStrutWireRing.1.fsp
SkidStrutWireRing.2.fsp
SkidStrutWireRing.3.fsp
FloatLine.fsp
FloatLine.1.fsp
SkidStrutWireRing.5.fsp
SkidStrutWireRing.4.fsp
FloatLine.2.fsp
FloatLine.3.fsp
FloatAluminumAirLines.fsp
tailhook.FloatRightRear.fsp
tailhook.FloatRightRear.1.fsp
tailhook.FloatRightRear.2.fsp
tailhook.FloatRightRear.3.fsp
tailhook.FloatLeftRear.fsp
tailhook.FloatLeftRear.1.fsp
tailhook.FloatLeftRear.2.fsp
tailhook.FloatLeftRear.3.fsp
tailhook.FloatRightFront.fsp
tailhook.FloatRightFront.1.fsp
tailhook.FloatRightFront.2.fsp
tailhook.FloatRightFront.3.fsp
tailhook.FloatLeftMiddle.fsp
tailhook.FloatLeftMiddle.1.fsp
tailhook.FloatLeftMiddle.2.fsp
tailhook.FloatLeftMiddle.3.fsp
tailhook.FloatLeftFront.fsp
tailhook.FloatLeftFront.1.fsp
tailhook.FloatLeftFront.2.fsp
tailhook.FloatLeftFront.3.fsp
tailhook.FloatRightMiddle.fsp
tailhook.FloatRightMiddle.1.fsp
tailhook.FloatRightMiddle.2.fsp
tailhook.FloatRightMiddle.3.fsp
LightSlidingDoorRightUpper_GreenBulb.fsp
LightSlidingDoorRightUpper.fsp
LightSlidingDoorLeftUpper_RedBulb.fsp
LightSlidingDoorLeftUpper.fsp
LightPilotDoorRightUpper_GreenBulb.fsp
LightPilotDoorRight.fsp
LightPilotDoorLeft_RedBulb.fsp
LightPilotDoorLeft.fsp
LightAftPosition.fsp
LightAftPosition.1.fsp
LightLowerAntiCollision.fsp
LightLowerAntiCollisionBulb.fsp
WinshieldWiperHright.fsp
WinshieldWiperHright.1.fsp
PilotSeatRight.fsp
FireExtRight.fsp
FireExtLeft.fsp
PilotSeatLeft.fsp
PanelMain.fsp
PanelShade.fsp
Box.fsp
PanelCoolingHoseRight.fsp
lever_stick_l_r.CyclicRight.fsp
PilotFootRests.fsp
PedalPushRelease.fsp
lever_pedals_l_r.PedalsRight.fsp
lever_pedals_l_r.PedalsLeft.fsp
CyclicBasePlates.fsp
lever_stick_l_r.CyclicLeft.fsp
PanelOverhead.fsp
RotorBrake.fsp
Tube.146.fsp
Tube.1.1.fsp
boot.fsp
Tube.1.1.1.fsp
boot.1.fsp
arm.fsp
arm.1.fsp
head.fsp
righthand.fsp
left_hand.fsp
Tube.150.fsp
Tube.92.fsp
Tube.1.2.fsp
boot.2.fsp
Tube.1.1.2.fsp
boot.3.fsp
arm.2.fsp
arm.3.fsp
lever_pedals_l_r.pilothead.fsp
righthand.1.fsp
left_hand.1.fsp
copilot_helmet.fsp
lever_collective.fsp
Polygon.2.fsp
Polygon.1.fsp
VentPilotUpperLeft.fsp
VentPilotUpperRight.fsp
lever_stick_fore_aft.CyclicRight.fsp
lever_stick_fore_aft.CyclicLeft.fsp
PedalBracket.fsp
PedalBracket.1.fsp
PedalBracket.2.fsp
PedalBracket.3.fsp
PilotFootRestsBottom.fsp
CenterConsoleLeftRadio1.fsp
CenterConsoleLeftRadio1.1.fsp
CenterConsoleLeftRadio1.2.fsp
WindshieldInnerHideRightVert.fsp
WindshieldInnerHideLeftVert.fsp
WindshieldBlindRight.fsp
WindshieldBlindRight.1.fsp
Box.9.fsp
Box.10.fsp
Box.11.fsp
Box.13.fsp
Box.14.fsp
PanelLightOne.fsp
PanelLightOne.1.fsp
PanelLightOne.2.fsp
PanelLightOne.3.fsp
PanelLightOne.4.fsp
NoseBlock.fsp
BookStack1.fsp
BookStack1.1.fsp
BookStack1.2.fsp
Tube.fsp
HC412OH.fsp
PanelCoolingHoseLeft.fsp
NoseBlackBox1.fsp
NoseBlackBox1.1.fsp
NoseBlackBox1.2.fsp
NoseBlackBox1.3.fsp
MapBoardRight.fsp
MapBoardLeft.fsp
MapBoardLeftMapSheet.fsp
SunVisorRodRight.fsp
SunVisorMountRight.fsp
SunVisorRodRight.1.fsp
SunVisorMountRight.1.fsp
lever_collective.MainRotorBlades.4.fsp
prop0_slow.MainRotorBladesParent.fsp
lever_collective.MainRotorBlades.5.fsp
lever_collective.MainRotorBlades.6.fsp
lever_collective.MainRotorBlades.7.fsp
lever_pedals_l_r.TailRotorBlade.2.fsp
prop0_slow.TailRotorHubParent.fsp
lever_pedals_l_r.TailRotorBlade.3.fsp
LandingLight.fsp
LandingLightBase.fsp
light_taxi.fsp
EmergFloatHandleBase.fsp
EmergFloatHandleBall.fsp
EmergFloatHandleBar.fsp
NoseConeOuterArtLayer.fsp
prop0_blurred.TrotorDisk.fsp
PitotRight.fsp
PitotLeft.fsp
NoseRadome.fsp
NightSunMount.fsp
lever_prop_pitch1.NightSunArm.fsp
lever_prop_pitch2.NightSunCan.fsp
light_land.NightSunBeam.fsp
prop0_blurred.MainRotor.fsp
AntBottomRear.fsp
AntBottomRear.1.fsp
Hoist.fsp
Hoist.1.fsp
Hoist.2.fsp
WirecutterSupport.fsp
WirecutterSupport.1.fsp
WireCutter.5.fsp
WirecutterSupport.2.fsp
WirecutterSupport.3.fsp
WireCutter.1.fsp
Seat.fsp
Seat.2.fsp
Seat.3.fsp
WinshieldUpperInner.fsp
WindshieldInner.fsp
NoseConeInner.fsp
WinshieldUpperOuter.fsp
WindshieldOuter.fsp
NoseConeOuter.fsp
door_passenger.DoorsSlidingRightInner.fsp
door_passenger.DoorsSlidingLeftInner.fsp
door_passenger.DoorsSlidingRightOuter.fsp
door_passenger.DoorsSlidingLeftOuter.fsp
door_cargo.DoorsFrontLeftInner.fsp
door_cargo.DoorsFrontRightInner.fsp
door_cargo.DoorsSwingingInnerLeft.fsp
door_cargo.DoorsSwingingInnerRight.fsp
door_cargo.DoorsFrontOuterLeft.fsp
door_cargo.DoorsFrontOuterRight.fsp
door_cargo.DoorsSwingingOuterLeft.fsp
door_cargo.DoorsSwingingOuterRight.fsp
 
Hi
Without knowing the project naming its hard to help...I always prefix my glass with well the name glass :) so glass_doorinner, glass_doorouter ect and they all get moved to the bottom of the list...what you have to watch out for is that all the parts that the glass is chained to are after all the internal parts but before the glass...if the sim sees say a door knob that is child to door which is up the top of the list the sim will draw the knob then I think all the other parts in the hierarchy will then be processed...you can use the view hierarchy under the model tab to view what parts are what in each individual hierarchy...
So to recap every single glass/transperent parts go to the end of the list, next up will be all the parts that are in the same hierarchy, then the rest of the model above those....you could try the flatten part hierarchy in the model tab, but form memory I think that brakes all the child parent relationships
 
Back
Top