• Which the release of FS2020 we see an explosition of activity on the forun and of course we are very happy to see this. But having all questions about FS2020 in one forum becomes a bit messy. So therefore we would like to ask you all to use the following guidelines when posting your questions:

    • Tag FS2020 specific questions with the MSFS2020 tag.
    • Questions about making 3D assets can be posted in the 3D asset design forum. Either post them in the subforum of the modelling tool you use or in the general forum if they are general.
    • Questions about aircraft design can be posted in the Aircraft design forum
    • Questions about airport design can be posted in the FS2020 airport design forum. Once airport development tools have been updated for FS2020 you can post tool speciifc questions in the subforums of those tools as well of course.
    • Questions about terrain design can be posted in the FS2020 terrain design forum.
    • Questions about SimConnect can be posted in the SimConnect forum.

    Any other question that is not specific to an aspect of development or tool can be posted in the General chat forum.

    By following these guidelines we make sure that the forums remain easy to read for everybody and also that the right people can find your post to answer it.

Another basic Gmax question

Melo965

Resource contributor
Messages
118
Country
us-washington
So I am working on the front and rear canopy on my model.

I want to select vertices in one view ex: Top and then toggle to Left view to move or rescale the already selected points. Everytime I click onto another viewport, I loose the selection on the vertices.

Is the only solution to change the working viewport from Top to Left or Back, etc?

So if that is the case, the 4 viewport arrangement in Gmax is not very useful, except to look at the work from multiple angles.

Please advise.

Thanks!
 
You could hit the spacebar to toggle selection lock.

Another option is that if you're using the quad layout and want to change the active viewport you can right-click in another viewport to make it active, which should not be resetting the selection
 
I second that of @bdf369, context mouse button (right) in new window. You can also use a short cut key in the current view, T=top, L=left, etc. without losing selections. I usually work in one expanded view and just use the shortcut keys to change view.
 
Avoid simply clicking into the new viewport. Instead, hold the mouse over the name of the viewport at the upper left (Left, Top, etc.) until the cursor changes shape and then click. You will select the new viewport and your vertex selection will be retained.
 
Thanks a lot everyone, makes sense. I knew there had to be a way.

And using the spacebar to lock the selections is great! My frustration level just went waaaay down. :-)

Thanks!
 
I just click using a view tool, or click in the viewport and undo the unselection, or use the keyboard shortcuts.
 
Hello,

I am running into another issue lately. When I am working in one of the four viewports, without changing any settings everything turns to bracketed view around every part and just shows the bounding box, or wireframe view. Is this some kind of resource problem where Gmax can't draw everything on screen at the same time. When I stop moving the mouse getting a different angle view, the parts and background planes go back to smoothed view. My project is not very complex yet, so I hope this is not a continuing problem.

Thanks!
 
Click "degradation override," bottom of the window, just below the transfrom type-in. You probably hit the keyboard shortcut ( o ) by accident.
 
It's a relic of less capable hardware days, but today's gear can more than cope with Gmax. Another nuisance I usually turn off is the rectangular brackets around a selected object - toggle these with J.
 
Well, looks like it's a part of the good old "it's a feature, not a bug" play.
 
A Reading from the gMax Bible:

And lo, the Space Bar lock was added to gMax for it is the solver of many frustrations…especially after selecting vertices in one view, to resize in another view.

But Beware!!! Least thou forgets the Space Bar lock is activated, for then thou shall spend many wasted minutes in fruitless attempts to select something else. And it shall all be in vain.

That last bit isn't in the gMax Bible…but it should be … if I had a nickel for each time I did that…


Sent from my iPad using Tapatalk
 
Thanks Erick, that was it. Now I know and will be more careful.

And I am going on vacation in the morning, and bringing the gMax Bible on the plane to do some studying in flight.

I love the space bar lock now, really glad that is a feature. :-)

Thanks to everyone for the help and advice.
 
What I do is setup custom shortcut keys and save them : since I have some trouble with my mouse (middle button not working on Win7), I've set :
- "H" for panning (the hand to move the screen; that doesn't change selection and you can click on any viewport to make it active)
- "V" for view rotation (same as above, but mostly used on Perspective view)
- "S" for select and move (the quad arrows) which works whatever sublevel you're in (Poly/Mesh, vertices, edges, polygons, element)
- "Alt+V" for vertices selection (see next shortcut)
- "C" for Polygon creation in Poly Mode (which is the mode I use most). It's very useful to switch between vertex selection (Alt+V) and Poly creation (C). To quickly switch to polygon selection, I press "C" then "Escape", which cancels polygon creation but remain in Polygon selection mode.
- "P" for Object properties, where you can quicly turn an object into bounding boxes, make transparent, etc.
- "Shift+S" for scaling (works whatever sublevel you are at)
- "Z" for zooming. Mouse drag zoom is much more precise than mouse wheel, while you can use mouse wheel for rapid zooming and drag for fine tuning.
- "R" for selection rotation (this cancel shortcut for Right view and I'm Ok with that since I dislike the Left/Top/Bottom/etc shortcuts I happened to hit at moment I don't need the most)
- "W" for switch between single viewport (the active one, being perspective or left/top/back/etc.) and the 4 views. To change view, let's say from Perspective to Top, I press "W" (got the 4 views in sight), then "H" (pan mode), then click on the Top viewport, then press "W", then eventually press "S" to go in select and move mode.

I've set some other shortcuts of actions I use most (hide selection, unhide all, etc.) and delete some that I found very annoying (don't remember them). The shortcuts above are the musthave on my point of view, and anyone can get quicly used. Unlike the spacebar, those are actions that has quite obvious UI hints.

However, think twice before changing habbits. How often you do one action defines wether you'd better use a shortcut or go the usual way. Since I spend 95% of my time refining shapes in perspective view, I don't care much about switching between views. On the other hand, if you're used to create shapes by moving vertices in 2D views (Left/Top/Back/etc), you'd better get used to the default "Left/Top/Right/Bottom/Back/Front/Perspective" shortcuts (or define them if some unset)

PS : I have a french keyboard. What matters is the shortcuts you define have meaning for you.
 
Thanks Karl, Good tips about which keyboard shortcuts to use. I currently don't use any and I can see the benefits for speeding up workflow. I will definitely take your suggestions to heart as I figure out my list to make the work go faster.

I am also getting back to basics a bit and reading the Gmax Bible cover to cover. Now that I have more experience using the program, the sections of the book are clearer and more understandable. Currently on page 206 - about 600 to go.

And Hangar32, the Selection lock toggle or spacebar is discussed on page 44 and 143. (When the Selection lock is on, the lock icon at the bottom of the screen has a yellow background), I will keep an eye on that to remember which mode I am in.

Thanks to everyone for the good advice!
 
Back
Top