• Which the release of FS2020 we see an explosition of activity on the forun and of course we are very happy to see this. But having all questions about FS2020 in one forum becomes a bit messy. So therefore we would like to ask you all to use the following guidelines when posting your questions:

    • Tag FS2020 specific questions with the MSFS2020 tag.
    • Questions about making 3D assets can be posted in the 3D asset design forum. Either post them in the subforum of the modelling tool you use or in the general forum if they are general.
    • Questions about aircraft design can be posted in the Aircraft design forum
    • Questions about airport design can be posted in the FS2020 airport design forum. Once airport development tools have been updated for FS2020 you can post tool speciifc questions in the subforums of those tools as well of course.
    • Questions about terrain design can be posted in the FS2020 terrain design forum.
    • Questions about SimConnect can be posted in the SimConnect forum.

    Any other question that is not specific to an aspect of development or tool can be posted in the General chat forum.

    By following these guidelines we make sure that the forums remain easy to read for everybody and also that the right people can find your post to answer it.

P3D v4 Autogen not showing

B

bar_rodoy

Messages
269
Hey.
I created vegetation autogen in scenproc. The autogen polygons are shown in the annotator but nothing is shown in P3D. All agn files are inside "texture" folder.

This is the Scenproc script
Code: 
ImportOGR|C:\Users\barro\Downloads\New folder\trees1.shp|*|*|+proj=tmerc +lat_0=31.73439361111111 +lon_0=35.20451694444445 +k=1.0000067 +x_0=219529.584 +y_0=626907.39 +ellps=GRS80 +towgs84=-48,55,52,0,0,0,0 +units=m +no_defs  <>
ImportOGR|C:\Users\barro\Downloads\New folder\trees2.shp|*|*|+proj=tmerc +lat_0=31.73439361111111 +lon_0=35.20451694444445 +k=1.0000067 +x_0=219529.584 +y_0=626907.39 +ellps=GRS80 +towgs84=-48,55,52,0,0,0,0 +units=m +no_defs  <>
ImportOGR|C:\Users\barro\Downloads\New folder\trees3.shp|*|*|+proj=tmerc +lat_0=31.73439361111111 +lon_0=35.20451694444445 +k=1.0000067 +x_0=219529.584 +y_0=626907.39 +ellps=GRS80 +towgs84=-48,55,52,0,0,0,0 +units=m +no_defs  <>
ImportOGR|C:\Users\barro\Downloads\New folder\trees4.shp|*|*|+proj=tmerc +lat_0=31.73439361111111 +lon_0=35.20451694444445 +k=1.0000067 +x_0=219529.584 +y_0=626907.39 +ellps=GRS80 +towgs84=-48,55,52,0,0,0,0 +units=m +no_defs  <>
ImportOGR|C:\Users\barro\Downloads\New folder\trees6.shp|*|*|+proj=tmerc +lat_0=31.73439361111111 +lon_0=35.20451694444445 +k=1.0000067 +x_0=219529.584 +y_0=626907.39 +ellps=GRS80 +towgs84=-48,55,52,0,0,0,0 +units=m +no_defs  <>
ImportOGR|C:\Users\barro\Downloads\New folder\trees8.shp|*|*|+proj=tmerc +lat_0=31.73439361111111 +lon_0=35.20451694444445 +k=1.0000067 +x_0=219529.584 +y_0=626907.39 +ellps=GRS80 +towgs84=-48,55,52,0,0,0,0 +units=m +no_defs  <>
ImportOGR|C:\Users\barro\Downloads\New folder\trees9.shp|*|*|+proj=tmerc +lat_0=31.73439361111111 +lon_0=35.20451694444445 +k=1.0000067 +x_0=219529.584 +y_0=626907.39 +ellps=GRS80 +towgs84=-48,55,52,0,0,0,0 +units=m +no_defs  <>
ImportOGR|C:\Users\barro\Downloads\New folder\trees10.shp|*|*|+proj=tmerc +lat_0=31.73439361111111 +lon_0=35.20451694444445 +k=1.0000067 +x_0=219529.584 +y_0=626907.39 +ellps=GRS80 +towgs84=-48,55,52,0,0,0,0 +units=m +no_defs  <>
ImportOGR|C:\Users\barro\Downloads\New folder\7-4.shp|*|*|+proj=tmerc +lat_0=31.73439361111111 +lon_0=35.20451694444445 +k=1.0000067 +x_0=219529.584 +y_0=626907.39 +ellps=GRS80 +towgs84=-48,55,52,0,0,0,0 +units=m +no_defs  <>
ImportOGR|C:\Users\barro\Downloads\New folder\5-3.shp|*|*|+proj=tmerc +lat_0=31.73439361111111 +lon_0=35.20451694444445 +k=1.0000067 +x_0=219529.584 +y_0=626907.39 +ellps=GRS80 +towgs84=-48,55,52,0,0,0,0 +units=m +no_defs  <>

SplitGrid|AGN|*|*
PointToPolygon|palm=1|10;10|*|polygon|palm
PointToPolygon|*|10;10|*|polygon|tree


CreateAGNPolyVeg|polygon=palm|{BCBE51DF-A7E3-45C4-8388-418623EE0481};{4E67E187-5D51-420C-83DC-F2DBDE9E0518}
CreateAGNPolyVeg|polygon=tree|{d5cab77f-340d-459e-b8e4-a12693bd34f8}

ExportAGN|P3D v2|C:\Program Files\Lockheed Martin\Addon Scenery\Israel\LLER Photo\Texture


Thats how it looks in the annontator:


Any ideas?
 
How big are the polygons? Small polygons might not show trees.

And you selected a valid guid of a vegetation type?

Are you close to an airport? Runways do exclude autogen.
 
arno said:
How big are the polygons? Small polygons might not show trees.

And you selected a valid guid of a vegetation type?

Are you close to an airport? Runways do exclude autogen.
Click to expand...

Polygons are 15x15. Guid is valid (selected throguh scenproc's menus)

It is indeed close the an airport. How far from the runway autogen is excluded?
 
It's normally a few hundred meter from the runway that they germt excluded.

15 x 15 meter should be big enough I think for trees to show. But do you mean the polygons are all rectangular?
 
arno said:
It's normally a few hundred meter from the runway that they germt excluded.

15 x 15 meter should be big enough I think for trees to show. But do you mean the polygons are all rectangular?
Click to expand...
Yes, they are all rectangular.
 
In that case you might want to try CreateAGNRectVeg instead of CreateAGNPolyVeg. I think that will work better.
 
You must log in or register to reply here.
Back
Top