• Which the release of FS2020 we see an explosition of activity on the forun and of course we are very happy to see this. But having all questions about FS2020 in one forum becomes a bit messy. So therefore we would like to ask you all to use the following guidelines when posting your questions:

    • Tag FS2020 specific questions with the MSFS2020 tag.
    • Questions about making 3D assets can be posted in the 3D asset design forum. Either post them in the subforum of the modelling tool you use or in the general forum if they are general.
    • Questions about aircraft design can be posted in the Aircraft design forum
    • Questions about airport design can be posted in the FS2020 airport design forum. Once airport development tools have been updated for FS2020 you can post tool speciifc questions in the subforums of those tools as well of course.
    • Questions about terrain design can be posted in the FS2020 terrain design forum.
    • Questions about SimConnect can be posted in the SimConnect forum.

    Any other question that is not specific to an aspect of development or tool can be posted in the General chat forum.

    By following these guidelines we make sure that the forums remain easy to read for everybody and also that the right people can find your post to answer it.

Crj-200

Messages
55
Country
dominicanrepublic
Hey Everyone. I just started moddeling a few months back and im creating this CRJ. Have been creating it for the past 4 weeks and was stuck in the window area until finally today I kind of did a breakthrough into the cockpit windows.

I have to thank many developers here who helped me create this plane unknowingly of course but when ever I got stuck I came here to find for answers and unfortunately for you I will continue.

I have been a texture artist for a while and when I got tired of texturing other peoples aircraft I said to my self " What if I make my own aircraft?" And certainly I am having tons of fun with this project.

I wanted to show you guys how it looks as I am open to different ideas and different techniques. Also I am looking critics on the model especially the window areas.



To the model

I created it with a cylinder 36 sides and then started Move Shift and Uniform Scale to model the shape of the cylinder.

I tried spline moddeling but I am afraid I still am too dumb to do that correctly.

The windows I did and redid about 20 times.

The first way i did it was a boolean cut. But as some other user doing a 737 had disorted edges around the cut so did I and i decided to start over/
Then I did Vertice pushing but It seemed to un-uniform so I messed up started over.

Then I did a Cut of the cylinder and add a symmetry editor and then did Cuts with edges and Vertices finally creating the shape of the windows and the frames and adding materials.


It seems like it got the job done. But I am not completely sure that was the way That it was soppoused to be done. So I come to you today for your advice and humbly for your opinions on how should I change or proceed with the next step.


Untitled-2.jpg

Untitled-1.jpg

CRJLEFT.jpg

CRJLEFTP.jpg

Render.jpg




P.S I plan to continue with the Wings.
 
Hi,

While there may be "better" methods, as long as you got the result you wanted you did nothing "wrong". :)
 
Unregistered Version of 3ds Max

You've been working on this for four weeks? Better get Max registered before it says trial period over!. You get thirty days free, so you have two days left...
 
Unregistered Version of 3ds Max
Thanks for the heads up. But I actually have had 3ds Max in my system for a long long time. About 2 years its always said that. :) Cant really explain why. Might be cause it asked me to register it and I did nt do it. who knows.
 
I paid $3000 for the 2005 version some years back, now I don't use it anymore because it looks exactly like gmax. All I really have is the license for it and I can't re-download it because Discreet is now dead and Autodesk took over and they no longer support it.

I see the new one is nearly $5,000!!! Not sure if I want to shell out that much for it right now. My local community college is also offering a course on 3D studio for $6,000 .. i'm pretty sure I can learn a lot whoo I don't know...

Anyway, your CRJ is looking nice, can't wait to see the wings. That's actually the first aircraft I modeled and the first project I finished and didn't know how to texture, lol ... lost the files ages ago.
 
Wow. Actually comforting to know that. Thank you very much for your feedback looks like we have a lot in common.
 
I paid $3000 for the 2005 version some years back, now I don't use it anymore because it looks exactly like gmax...

That'll be Max 7. Appearances can be deceptive - I have it and it's way better than gmax. Just got to finish the current project and I'll move over from gmax for good! :D
 
That'll be Max 7. Appearances can be deceptive - I have it and it's way better than gmax. Just got to finish the current project and I'll move over from gmax for good! :D

Ah your lucky, I believe with my license I may be able to get an upgrade or something and pay less.

igyidj.png


It's actually just $1000 more than what I had paid last time and the last time I bought it, I used a TAX REFUND check.

I would have to save money for about 5 months to be able to purchase that given my financial situation, school payments,
car payments, insurance payments, rent payments ... you get the idea.

Oh yeah, just to add, I noticed you have two slices in close proximity in your windows, try to get rid of one or it will cause a shading issue,
you can sort of see it on your render picture too. Make sure your slices are evenly spaced out too many here and there will usually cause
a shading problem.
 
Last edited:
Okay, I have almost gone crazy been working on the wing for two days and im getting nowhere even close making the winglet. I have actually taught of making a winglet-less CRJ lol.


I tried doing a move bend rotate of the caps.

Then I tried doing a FFD and while it seemed better I still cant get the damn thing to work.

What Am i doing wronge.

Should I do a Polygon select and select the edge then do FFD or is it in Vertice mode.


Please help

Wing3.jpg


Wing2.jpg


Wing1.jpg
 
FFD is used on existing geometry to shape it as you want. Perhaps this video will explain it better.

Extruding from the end poly might be one way of starting the winglet, then shaping to suit. There are lots of ways of doing the job.
 
To model the wing tips, just extrude the polygon at the edge but before you do that look at your front views, create line guides that curve upwards then slow shape the extruded polygon into.

I however, would have used splines. Wish I still had the files of my crj :/

Oh yeah, let me know how many hairs you lost when you create the T tail portion, you're in for a real treat, lol. The hardest parts of this aircraft are the tail and the wing tips if you can get through that, you pretty much have your model made.
 
HairySpin thanks for the Video Il look at it calmly later on.

I made the wing out of a spline .Should I have continued the winglet in the same spline?
 
Last edited:
HairySpin thanks for the Video Il look at it calmly later on.

I made the wing out of a spline .Should I have continued the winglet in the same spline?

Watch the polygon count on the wing, you don't want too much, remember that you can add your own lines with the aid of cross-section.

You can make the wing tip the same way, just model the wing tip using all splines, splines just really let you draft your work first before you skin it.

If you get stuck, take a notebook and draw what it would look like if you were using only splines, then sit down and do it in gmax, then skin it slowly, this is what I do when I get stuck.
 
Faos, I finally got my wingtip on so I can move on. The only thing Is that I want to convert it to and editable poly so i can add an FFD modifier to make some more adjustments. To my surprise its easier said than done. The reason is that when I convert it I have a crap load of vertices making it almost impossible to edit it. Is there any way I can convert it keeping the vertice count low?

P.S Im going to have to switch to spline moddeling its so much easier and I even think its fun.
WingWire1.jpg

WingWire2.jpg

WingWire3.jpg
 
Just wanted to do a quick render with the wing and the fuselage. if only planes could fly like this
1894216.jpg
 
Great looking wing!

When I make a wing from Splines, and I have too many Vertices on the start, I weld some Vertices together to lower the number, 'then' Extrude' the Spline outward.

Dont be afraid to make several wings. Your third or fourth may be far far better then you ever imagined. I sometimes will do 5 fuselages before I have one that I really like.
 
Great looking wing!
Extrude' the Spline outward.
.

Thanks , When I extrude the splne outward do i have to first convert the initial spline to and editable Poly, Thats what I started doing right after you gave me that tip.

Just want to make sure im doing it correctly
 
The spline work for the wing is perfect! Don't even touch it, find a way to skin with out having too many polys keep at it. And congrats on the wing tip, you are making great progress!!
Also do an export to FS once in a while, don't let surprises surprise you in the end or you'll be in for a world of hurt.
 
Back
Top