• Which the release of FS2020 we see an explosition of activity on the forun and of course we are very happy to see this. But having all questions about FS2020 in one forum becomes a bit messy. So therefore we would like to ask you all to use the following guidelines when posting your questions:

    • Tag FS2020 specific questions with the MSFS2020 tag.
    • Questions about making 3D assets can be posted in the 3D asset design forum. Either post them in the subforum of the modelling tool you use or in the general forum if they are general.
    • Questions about aircraft design can be posted in the Aircraft design forum
    • Questions about airport design can be posted in the FS2020 airport design forum. Once airport development tools have been updated for FS2020 you can post tool speciifc questions in the subforums of those tools as well of course.
    • Questions about terrain design can be posted in the FS2020 terrain design forum.
    • Questions about SimConnect can be posted in the SimConnect forum.

    Any other question that is not specific to an aspect of development or tool can be posted in the General chat forum.

    By following these guidelines we make sure that the forums remain easy to read for everybody and also that the right people can find your post to answer it.

Error compiling airport

JohnG

JohnG

Messages
402
Country
australia
Using 1.37.5, while compiling my own YMML redux (with XWind runway settings, I managed to get the following error messages:

ScruffyDuck Scenery Design Engine Compiling
Using UNKNOWN BglComp....


Parsing document: D:\Program Files\Microsoft Games\Microsoft Flight Simulator X\Addon Scenery\scenery\YMML_ADE_JRG.xml

WARNING: #C1102 YMML 13632755 RUNWAY 5000 Airport (YMML) has object (RUNWAY) that is 13632755 meters from the ARP with a test threshold of 5000 meters! XML line: 3736.
WARNING: #C1102 YMML 13632755 RUNWAY 5000 Airport (YMML) has object (RUNWAY) that is 13632755 meters from the ARP with a test threshold of 5000 meters! XML line: 3754.
INTERNAL COMPILER ERROR: #C2505:
***** Duplicate Runway *****
INTERNAL COMPILER ERROR: #C2031: Failed element parse <Runway>
INTERNAL COMPILER ERROR: #C2032: XML Parse Error! Element tree follows:

ERROR: <FSData
ERROR: version = 9.0
ERROR: >
ERROR: <Airport
ERROR: country = Australia
ERROR: state = Victoria
ERROR: city = Melbourne
ERROR: name = Melbourne Intl
ERROR: lat = -37.6733331754804
ERROR: lon = 144.843333363533
ERROR: alt = 132.283M
ERROR: magvar = -11
ERROR: trafficScalar = 0.7
ERROR: airportTestRadius = 5000.0M
ERROR: ident = YMML
ERROR: >
ERROR: <Runway
ERROR: lat = 85
ERROR: lon = 144.843333363533
ERROR: alt = 0.0M
ERROR: surface = ICE
ERROR: heading = 117
ERROR: length = 3.0M
ERROR: width = 3.0M
ERROR: number = 11
ERROR: designator = NONE
ERROR: patternAltitude = 0.0M
ERROR: primaryTakeoff = NO
ERROR: primaryLanding = NO
ERROR: primaryPattern = LEFT
ERROR: secondaryTakeoff = NO
ERROR: secondaryLanding = NO
ERROR: secondaryPattern = LEFT
ERROR: >
ERROR:
WARNING: #C1102 YMML 13632755 RUNWAY 5000 Airport (YMML) has object (RUNWAY) that is 13632755 meters from the ARP with a test threshold of 5000 meters! XML line: 3790.
WARNING: #C1102 YMML 13632755 RUNWAY 5000 Airport (YMML) has object (RUNWAY) that is 13632755 meters from the ARP with a test threshold of 5000 meters! XML line: 3808.
WARNING: #C1102 YMML 13632755 RUNWAY 5000 Airport (YMML) has object (RUNWAY) that is 13632755 meters from the ARP with a test threshold of 5000 meters! XML line: 3826.
WARNING: #C1102 YMML 13632755 RUNWAY 5000 Airport (YMML) has object (RUNWAY) that is 13632755 meters from the ARP with a test threshold of 5000 meters! XML line: 3844.
INTERNAL COMPILER ERROR: #C2505:
***** Duplicate Runway *****
INTERNAL COMPILER ERROR: #C2031: Failed element parse <Runway>
INTERNAL COMPILER ERROR: #C2032: XML Parse Error! Element tree follows:

ERROR: <FSData
ERROR: version = 9.0
ERROR: >
ERROR: <Airport
ERROR: country = Australia
ERROR: state = Victoria
ERROR: city = Melbourne
ERROR: name = Melbourne Intl
ERROR: lat = -37.6733331754804
ERROR: lon = 144.843333363533
ERROR: alt = 132.283M
ERROR: magvar = -11
ERROR: trafficScalar = 0.7
ERROR: airportTestRadius = 5000.0M
ERROR: ident = YMML
ERROR: >
ERROR: <Runway
ERROR: lat = 85
ERROR: lon = 144.843333363533
ERROR: alt = 0.0M
ERROR: surface = ICE
ERROR: heading = 157.4
ERROR: length = 3.0M
ERROR: width = 3.0M
ERROR: number = 15
ERROR: designator = NONE
ERROR: patternAltitude = 0.0M
ERROR: primaryTakeoff = NO
ERROR: primaryLanding = NO
ERROR: primaryPattern = LEFT
ERROR: secondaryTakeoff = NO
ERROR: secondaryLanding = NO
ERROR: secondaryPattern = LEFT
ERROR: >
ERROR:
INTERNAL COMPILER ERROR: #C2505:
***** Duplicate Runway *****
INTERNAL COMPILER ERROR: #C2031: Failed element parse <Runway>
INTERNAL COMPILER ERROR: #C2032: XML Parse Error! Element tree follows:

ERROR: <FSData
ERROR: version = 9.0
ERROR: >
ERROR: <Airport
ERROR: country = Australia
ERROR: state = Victoria
ERROR: city = Melbourne
ERROR: name = Melbourne Intl
ERROR: lat = -37.6733331754804
ERROR: lon = 144.843333363533
ERROR: alt = 132.283M
ERROR: magvar = -11
ERROR: trafficScalar = 0.7
ERROR: airportTestRadius = 5000.0M
ERROR: ident = YMML
ERROR: >
ERROR: <Runway
ERROR: lat = 85
ERROR: lon = 144.843333363533
ERROR: alt = 0.0M
ERROR: surface = ICE
ERROR: heading = 165.3
ERROR: length = 3.0M
ERROR: width = 3.0M
ERROR: number = 15
ERROR: designator = NONE
ERROR: patternAltitude = 0.0M
ERROR: primaryTakeoff = NO
ERROR: primaryLanding = NO
ERROR: primaryPattern = LEFT
ERROR: secondaryTakeoff = NO
ERROR: secondaryLanding = NO
ERROR: secondaryPattern = LEFT
ERROR: >
ERROR:
INTERNAL COMPILER ERROR: #C2607: Compilation errors detected, compilation failed!


Parse complete!

The above obviously means something to someone.

Unknown BGLCOMP: I have no idea about this one, the BGLCOMP will be the same one I've always used, unless some third party app added something without me knowing it.

The source file is too big to attach here, otherwise I would do so.

I have exported and attached the runway data - I hope this helps.
 
Last edited:
Well for starters you have two runway 15's so you need to go to the runway list and change one of them. Also looks like you might have more than one runway 11. If needs be you can email me the project file but try that first
 
Did you use the fault-finder John? I'm not sure whether it picks up duplicate runways.

George

Edit. No it doesn't ;)
 
Last edited:
The fault finder reported no errors.

How, if the xwind runways have to be 7.9 degrees apart, can you avoid having multiple runways with the same name? Do you just use random numbers? Or what?

Answering my own question - yes, it appears that the name of the runway doesn't need to have anything to do with the actual heading - they just have to be "unique". I suspect that I won't be the only person to run afoul of this, so perhaps when that section of the Help is being written ...
 
Last edited:
We will automate this part of the process in a later version :)
 
You must log in or register to reply here.
Back
Top