• Which the release of FS2020 we see an explosition of activity on the forun and of course we are very happy to see this. But having all questions about FS2020 in one forum becomes a bit messy. So therefore we would like to ask you all to use the following guidelines when posting your questions:

    • Tag FS2020 specific questions with the MSFS2020 tag.
    • Questions about making 3D assets can be posted in the 3D asset design forum. Either post them in the subforum of the modelling tool you use or in the general forum if they are general.
    • Questions about aircraft design can be posted in the Aircraft design forum
    • Questions about airport design can be posted in the FS2020 airport design forum. Once airport development tools have been updated for FS2020 you can post tool speciifc questions in the subforums of those tools as well of course.
    • Questions about terrain design can be posted in the FS2020 terrain design forum.
    • Questions about SimConnect can be posted in the SimConnect forum.

    Any other question that is not specific to an aspect of development or tool can be posted in the General chat forum.

    By following these guidelines we make sure that the forums remain easy to read for everybody and also that the right people can find your post to answer it.

Error Compiling EDDM bgl from T2G

W

WinstonWolf

Messages
9
Country
germany
Hello ,
I want to compile to BGL File and become this Error :


Compiler Errors Found. These were not identified by the Issue Manager. Please let us know
what the compiler error is so that we can improve the Issue Manager.

The compiler message is shown below

ScruffyDuck Scenery Design Engine Compiling
Using BglComp....


Parsing document: D:\ADE\!AdeTempWorkOnly\EDDM_ADEP5_ADE.xml

INTERNAL COMPILER ERROR: #C2033: XML Parse Error (line, column, error)

ERROR: 7947, 26, '-1075' verstößt gegen minInclusive-Einschränkung von '0'.

Analyse des Attributs 'number' mit dem Wert '-1075' fehlgeschlagen.

INTERNAL COMPILER ERROR: #C2425: Negative numbers are not allowed!
INTERNAL COMPILER ERROR: #C2031: Failed element parse <TaxiwayParking>
INTERNAL COMPILER ERROR: #C2032: XML Parse Error! Element tree follows:

ERROR: <FSData
ERROR: version = 9.0
ERROR: >
ERROR: <Airport
ERROR: country = Germany
ERROR: city = Munich
ERROR: name = Munich
ERROR: lat = 48.3537835255265
ERROR: lon = 11.7860859632492
ERROR: alt = 453.236M
ERROR: magvar = -1
ERROR: trafficScalar = 0.7
ERROR: airportTestRadius = 5000.0M
ERROR: sloped = FALSE
ERROR: ident = EDDM
ERROR: >
ERROR: <TaxiwayParking
ERROR: index = 35
ERROR: lat = 48.3563571050763
ERROR: lon = 11.7997714877129
ERROR: heading = 263.474487304688
ERROR: radius = 16.0M
ERROR: type = GATE_SMALL
ERROR: name = GATE
ERROR: number = -1075
ERROR: airlineCodes = DLH, CLH
ERROR: teeOffset1 = 7.9248
ERROR: pushBack = BOTH
ERROR: >
ERROR:
INTERNAL COMPILER ERROR: #C2033: XML Parse Error (line, column, error)

ERROR: 8097, 26, '-1074' verstößt gegen minInclusive-Einschränkung von '0'.

Analyse des Attributs 'number' mit dem Wert '-1074' fehlgeschlagen.

INTERNAL COMPILER ERROR: #C2425: Negative numbers are not allowed!
INTERNAL COMPILER ERROR: #C2031: Failed element parse <TaxiwayParking>
INTERNAL COMPILER ERROR: #C2032: XML Parse Error! Element tree follows:

ERROR: <FSData
ERROR: version = 9.0
ERROR: >
ERROR: <Airport
ERROR: country = Germany
ERROR: city = Munich
ERROR: name = Munich
ERROR: lat = 48.3537835255265
ERROR: lon = 11.7860859632492
ERROR: alt = 453.236M
ERROR: magvar = -1
ERROR: trafficScalar = 0.7
ERROR: airportTestRadius = 5000.0M
ERROR: sloped = FALSE
ERROR: ident = EDDM
ERROR: >
ERROR: <TaxiwayParking
ERROR: index = 48
ERROR: lat = 48.3466904237866
ERROR: lon = 11.7651173472404
ERROR: heading = 263.5
ERROR: radius = 16.0M
ERROR: type = RAMP_GA_LARGE
ERROR: name = GATE
ERROR: number = -1074
ERROR: airlineCodes = BMR
ERROR: teeOffset1 = 7.9248
ERROR: pushBack = BOTH
ERROR: >
ERROR:
INTERNAL COMPILER ERROR: #C2033: XML Parse Error (line, column, error)

ERROR: 8109, 26, '-1072' verstößt gegen minInclusive-Einschränkung von '0'.

Analyse des Attributs 'number' mit dem Wert '-1072' fehlgeschlagen.

INTERNAL COMPILER ERROR: #C2425: Negative numbers are not allowed!
INTERNAL COMPILER ERROR: #C2031: Failed element parse <TaxiwayParking>
INTERNAL COMPILER ERROR: #C2032: XML Parse Error! Element tree follows:

ERROR: <FSData
ERROR: version = 9.0
ERROR: >
ERROR: <Airport
ERROR: country = Germany
ERROR: city = Munich
ERROR: name = Munich
ERROR: lat = 48.3537835255265
ERROR: lon = 11.7860859632492
ERROR: alt = 453.236M
ERROR: magvar = -1
ERROR: trafficScalar = 0.7
ERROR: airportTestRadius = 5000.0M
ERROR: sloped = FALSE
ERROR: ident = EDDM
ERROR: >
ERROR: <TaxiwayParking
ERROR: index = 49
ERROR: lat = 48.3462411537766
ERROR: lon = 11.7640243470669
ERROR: heading = 263.5
ERROR: radius = 16.0M
ERROR: type = RAMP_GA_LARGE
ERROR: name = GATE
ERROR: number = -1072
ERROR: airlineCodes = BMR
ERROR: teeOffset1 = 7.9248
ERROR: pushBack = BOTH
ERROR: >
ERROR:
INTERNAL COMPILER ERROR: #C2033: XML Parse Error (line, column, error)

ERROR: 8121, 26, '-1073' verstößt gegen minInclusive-Einschränkung von '0'.

Analyse des Attributs 'number' mit dem Wert '-1073' fehlgeschlagen.

INTERNAL COMPILER ERROR: #C2425: Negative numbers are not allowed!
INTERNAL COMPILER ERROR: #C2031: Failed element parse <TaxiwayParking>
INTERNAL COMPILER ERROR: #C2032: XML Parse Error! Element tree follows:

ERROR: <FSData
ERROR: version = 9.0
ERROR: >
ERROR: <Airport
ERROR: country = Germany
ERROR: city = Munich
ERROR: name = Munich
ERROR: lat = 48.3537835255265
ERROR: lon = 11.7860859632492
ERROR: alt = 453.236M
ERROR: magvar = -1
ERROR: trafficScalar = 0.7
ERROR: airportTestRadius = 5000.0M
ERROR: sloped = FALSE
ERROR: ident = EDDM
ERROR: >
ERROR: <TaxiwayParking
ERROR: index = 50
ERROR: lat = 48.3463283255696
ERROR: lon = 11.7652103304863
ERROR: heading = 263.5
ERROR: radius = 16.0M
ERROR: type = RAMP_GA_LARGE
ERROR: name = GATE
ERROR: number = -1073
ERROR: airlineCodes = BMR
ERROR: teeOffset1 = 7.9248
ERROR: pushBack = BOTH
ERROR: >
ERROR:
INTERNAL COMPILER ERROR: #C2033: XML Parse Error (line, column, error)

ERROR: 8133, 26, '-1071' verstößt gegen minInclusive-Einschränkung von '0'.

Analyse des Attributs 'number' mit dem Wert '-1071' fehlgeschlagen.

INTERNAL COMPILER ERROR: #C2425: Negative numbers are not allowed!
INTERNAL COMPILER ERROR: #C2031: Failed element parse <TaxiwayParking>
INTERNAL COMPILER ERROR: #C2032: XML Parse Error! Element tree follows:

ERROR: <FSData
ERROR: version = 9.0
ERROR: >
ERROR: <Airport
ERROR: country = Germany
ERROR: city = Munich
ERROR: name = Munich
ERROR: lat = 48.3537835255265
ERROR: lon = 11.7860859632492
ERROR: alt = 453.236M
ERROR: magvar = -1
ERROR: trafficScalar = 0.7
ERROR: airportTestRadius = 5000.0M
ERROR: sloped = FALSE
ERROR: ident = EDDM
ERROR: >
ERROR: <TaxiwayParking
ERROR: index = 51
ERROR: lat = 48.3466012403369
ERROR: lon = 11.7639626562595
ERROR: heading = 263.5
ERROR: radius = 16.0M
ERROR: type = RAMP_GA_LARGE
ERROR: name = GATE
ERROR: number = -1071
ERROR: airlineCodes = BMR
ERROR: teeOffset1 = 7.9248
ERROR: pushBack = BOTH
ERROR: >
ERROR:
INTERNAL COMPILER ERROR: #C2033: XML Parse Error (line, column, error)

ERROR: 8346, 26, '-1085' verstößt gegen minInclusive-Einschränkung von '0'.

Analyse des Attributs 'number' mit dem Wert '-1085' fehlgeschlagen.

INTERNAL COMPILER ERROR: #C2425: Negative numbers are not allowed!
INTERNAL COMPILER ERROR: #C2031: Failed element parse <TaxiwayParking>
INTERNAL COMPILER ERROR: #C2032: XML Parse Error! Element tree follows:

ERROR: <FSData
ERROR: version = 9.0
ERROR: >
ERROR: <Airport
ERROR: country = Germany
ERROR: city = Munich
ERROR: name = Munich
ERROR: lat = 48.3537835255265
ERROR: lon = 11.7860859632492
ERROR: alt = 453.236M
ERROR: magvar = -1
ERROR: trafficScalar = 0.7
ERROR: airportTestRadius = 5000.0M
ERROR: sloped = FALSE
ERROR: ident = EDDM
ERROR: >
ERROR: <TaxiwayParking
ERROR: index = 69
ERROR: lat = 48.3570913597941
ERROR: lon = 11.7996244132519
ERROR: heading = 263.574462890625
ERROR: radius = 19.1M
ERROR: type = GATE_SMALL
ERROR: name = GATE
ERROR: number = -1085
ERROR: airlineCodes = SWR, DLA, DLH
ERROR: teeOffset1 = 7.9248
ERROR: pushBack = BOTH
ERROR: >
ERROR:
INTERNAL COMPILER ERROR: #C2589: Did not find end Parking Spot #69 needed for Taxi path #766 at airport EDDM.
INTERNAL COMPILER ERROR: #C2589: Did not find end Parking Spot #35 needed for Taxi path #772 at airport EDDM.
INTERNAL COMPILER ERROR: #C2589: Did not find end Parking Spot #48 needed for Taxi path #830 at airport EDDM.
INTERNAL COMPILER ERROR: #C2589: Did not find end Parking Spot #48 needed for Taxi path #831 at airport EDDM.
INTERNAL COMPILER ERROR: #C2589: Did not find end Parking Spot #50 needed for Taxi path #833 at airport EDDM.
INTERNAL COMPILER ERROR: #C2589: Did not find end Parking Spot #50 needed for Taxi path #834 at airport EDDM.
INTERNAL COMPILER ERROR: #C2589: Did not find end Parking Spot #49 needed for Taxi path #836 at airport EDDM.
INTERNAL COMPILER ERROR: #C2589: Did not find end Parking Spot #51 needed for Taxi path #837 at airport EDDM.
INTERNAL COMPILER ERROR: #C2589: Did not find end Parking Spot #49 needed for Taxi path #838 at airport EDDM.
INTERNAL COMPILER ERROR: #C2589: Did not find end Parking Spot #51 needed for Taxi path #841 at airport EDDM.
INTERNAL COMPILER ERROR: #C2607: Compilation errors detected, compilation failed!
INTERNAL COMPILER ERROR: #C2034: XML Parse Fatal Error (line, column, error)

ERROR: 26065, 0, Fehler bei der Überprüfung.

INTERNAL COMPILER ERROR: #C2430: Unrecoverable error parsing XML!
INTERNAL COMPILER ERROR: #C2006: Parse failed (0x80004005)
INTERNAL COMPILER ERROR: #C2003: Failed to process file: D:\ADE\!AdeTempWorkOnly\EDDM_ADEP5_ADE.xml



Whats wrong with this File ?

Thanks

Michael
 
Quite a lot seems wrong. Please attach the ADE project file (.ad4 extension) to a post here. Is this based on a stock file or a third party bgl file?
 
This appears to have been created by AFX. However it seems that there is a bug in the way ADE decompiles the parking number. The interesting thing is that this bug has been present since ADE was created in 2006 and this appears to be the first time it has been triggered :( I am working on a fix
 
I have fixed this bug. The fix will be available in the next update to ADE 1.79. In the meantime here is a project file which has the correct parking spot numbers. If you work from this you should be able to make changes. Do not load the original bgl file again because the errors will come back. The problem is the way that ADE reads large parking spot numbers - it makes some negative which causes the compile error
 

Attachments

Hello ,
Can u help me onesmore ?
I try to put Airline Codes in the Cargo Parking Positions in MUC.
But after an certain Number of Code Entrys in the Parking Positions , the compiling brings this error .
Can it be that the number of Airline Codes is limited ?


Thanks
Michael

ScruffyDuck Scenery Design Engine Compiling
Using BglComp....


Parsing document: D:\ADE-V5\!AdeTempWorkOnly\EDDM_ADEX_ADE_Fixed.xml

INTERNAL COMPILER ERROR: #C2621: Couldn't convert WChar string!
INTERNAL COMPILER ERROR: #C2029: Failed to convert attribute value from UNICODE!
INTERNAL COMPILER ERROR: #C2432: Invalid attribute!

ERROR: airlineCodes
ERROR: BCS, TAY, PAC, UPS, ACX, CCC, GTI, CWC, NAC, MSX, ICL, CAO, CKS, BOX, ABD, MGC, ADB, FAH, ABR, TPA, BBD, CLX, VDA, SWN, NPT, UAE, GEC, YZR, FPO, VAS, AZQ, EVA, ABW, SRR, GCL, CLU, FDX, MPH, RUN, SWT, CCC, ATG, RUN, FRH, SOO, BBD, CGF, MAS, XRC, MNB, ACP, DHL
INTERNAL COMPILER ERROR: #C2032: XML Parse Error! Element tree follows:

ERROR: <FSData
ERROR: version = 9.0
ERROR: >
ERROR: <Airport
ERROR: country = Germany
ERROR: city = Munich
ERROR: name = Munich
ERROR: lat = 48.3537835255265
ERROR: lon = 11.7860859632492
ERROR: alt = 453.236M
ERROR: magvar = -1
ERROR: trafficScalar = 0.7
ERROR: airportTestRadius = 5000.0M
ERROR: sloped = FALSE
ERROR: ident = EDDM
ERROR: >
ERROR: <TaxiwayParking
ERROR: index = 149
ERROR: lat = 48.3483235538006
ERROR: lon = 11.7663507163525
ERROR: heading = 353.600006103516
ERROR: radius = 36.1M
ERROR: type = RAMP_CARGO
ERROR: name = PARKING
ERROR: number = 907
ERROR: >
ERROR:


Parse complete!
 
Yes there is a limit and as I recall after the first 10 or so there is little chance of them being used. Someone will correct me on that. Your error may be too many airlines codes - it looks a like a lot. Try removing some of them from the end until the error goes. This has come up before - so please read this thread: https://www.fsdeveloper.com/forum/threads/max-number-of-parking-codes.16419/

and another one: https://www.fsdeveloper.com/forum/threads/max-number-of-parking-codes-per-spot.436663/
 
Last edited:
You must log in or register to reply here.
Back
Top