• Which the release of FS2020 we see an explosition of activity on the forun and of course we are very happy to see this. But having all questions about FS2020 in one forum becomes a bit messy. So therefore we would like to ask you all to use the following guidelines when posting your questions:

    • Tag FS2020 specific questions with the MSFS2020 tag.
    • Questions about making 3D assets can be posted in the 3D asset design forum. Either post them in the subforum of the modelling tool you use or in the general forum if they are general.
    • Questions about aircraft design can be posted in the Aircraft design forum
    • Questions about airport design can be posted in the FS2020 airport design forum. Once airport development tools have been updated for FS2020 you can post tool speciifc questions in the subforums of those tools as well of course.
    • Questions about terrain design can be posted in the FS2020 terrain design forum.
    • Questions about SimConnect can be posted in the SimConnect forum.

    Any other question that is not specific to an aspect of development or tool can be posted in the General chat forum.

    By following these guidelines we make sure that the forums remain easy to read for everybody and also that the right people can find your post to answer it.

How to compile

F

FlyingLargo

Messages
5
Country
belgium
Hello,

I know that the problem have been certainly submit but here is what I have when I try to compile my scenery :


Parsing document: Brussels South EBCI.xml

INTERNAL COMPILER ERROR: #C2589: Did not find end Parking Spot #0 needed for Taxi path #1 at airport EBCI.
INTERNAL COMPILER ERROR: #C2589: Did not find end Parking Spot #0 needed for Taxi path #10 at airport EBCI.
INTERNAL COMPILER ERROR: #C2589: Did not find end Parking Spot #0 needed for Taxi path #14 at airport EBCI.
INTERNAL COMPILER ERROR: #C2588: Did not find start point #0 needed for Taxi Path #15 at airport EBCI.
INTERNAL COMPILER ERROR: #C2591: Taxi path #38 references a non-existent Runway #7 at airport EBCI.
INTERNAL COMPILER ERROR: #C2591: Taxi path #39 references a non-existent Runway #7 at airport EBCI.
INTERNAL COMPILER ERROR: #C2591: Taxi path #40 references a non-existent Runway #7 at airport EBCI.
INTERNAL COMPILER ERROR: #C2591: Taxi path #41 references a non-existent Runway #7 at airport EBCI.
INTERNAL COMPILER ERROR: #C2591: Taxi path #42 references a non-existent Runway #7 at airport EBCI.
INTERNAL COMPILER ERROR: #C2591: Taxi path #43 references a non-existent Runway #7 at airport EBCI.


The problem is how to find those taxi path or Parking Spot.

Thanks for your Help.

Christophe
 
Negative. I run the clean utility and the check error option but no change. Still have those errors.

Christophe
 
I have try but on the Compile repport there is no possibility to doubleclick on the different errors. It's only the case on the Chrck Error report and there I have no errors reported.

Christophe
 
can you attach the file Brussels South EBCI.xml to a post here so that we can look at it also?
 
Try this one. You had an error in your ATIS comms frequency - I changed it to 134.625. I had to remove links that referred to taxipoint 0 as that point does not exist. You will need to check the taxiway network to see if any paths are now missing that you expected to be there.

Be aware also that there are a lot of potential faults with the taxi network including open links (links not connected to the network) - these may be deliberate but it looks in some places like you intended a connection but it was not made. The following parking spots do not appear connected to the taxi network so aircraft could not use them (17, 18, 20, 21, 23, 56, 57, 58, 59, 60, 61, 62, 63, 65, 66, 67) This may be intended of course. The runway 7/25 appears to be closed to take off and landing. This means no aircraft will use it. As this is the only runway it seems the airport would be out of use?
 

Attachments

Last edited:
You must log in or register to reply here.
Back
Top