- Messages
- 235
- Country

I need to confirm that I got my information straight in regards to reference datum and Flight Simulator center point.
Assumption 1; since I am working on a boat, my “Flight Simulator Center” should be located at the center of gravity of the boat.
Assumption 2; Aircrafts (in my case boat) reference datum is the location of the 0,0,0 point that was used in Gmax while creating the model.
If the above assumptions are correct, since I am building my model with the 0,0,0 in Gmax located at the center of gravity of the boat and at the waterline , this is what I should have in my sim.cfg :
reference_datum_position = 0.0, 0.0, 0.0
empty_weight_CG_position = 0.0, 0.0, 0.0
Presently I have the following;
reference_datum_position = 28.20, 0, 0.0
empty_weight_CG_position = -28.20, 0, 0.0
Although I may need to reassess the empty weight CG as I will need to reexamine my boat plans as to vertical position of the center of gravity, if it is given.
Reading documentation for the aircraft.cfg, they make reference to “defined reference datum” in one location and “aircraft datum reference point” in other placed. Are these the same or is the first one the FS center point and the second the model 0,0,0?
In my case, these might be the same, but I like to be clear that I am interpreting the wording correctly.
Michel E Paquette
Assumption 1; since I am working on a boat, my “Flight Simulator Center” should be located at the center of gravity of the boat.
Assumption 2; Aircrafts (in my case boat) reference datum is the location of the 0,0,0 point that was used in Gmax while creating the model.
If the above assumptions are correct, since I am building my model with the 0,0,0 in Gmax located at the center of gravity of the boat and at the waterline , this is what I should have in my sim.cfg :
reference_datum_position = 0.0, 0.0, 0.0
empty_weight_CG_position = 0.0, 0.0, 0.0
Presently I have the following;
reference_datum_position = 28.20, 0, 0.0
empty_weight_CG_position = -28.20, 0, 0.0
Although I may need to reassess the empty weight CG as I will need to reexamine my boat plans as to vertical position of the center of gravity, if it is given.
Reading documentation for the aircraft.cfg, they make reference to “defined reference datum” in one location and “aircraft datum reference point” in other placed. Are these the same or is the first one the FS center point and the second the model 0,0,0?
In my case, these might be the same, but I like to be clear that I am interpreting the wording correctly.
Michel E Paquette



