• Which the release of FS2020 we see an explosition of activity on the forun and of course we are very happy to see this. But having all questions about FS2020 in one forum becomes a bit messy. So therefore we would like to ask you all to use the following guidelines when posting your questions:

    • Tag FS2020 specific questions with the MSFS2020 tag.
    • Questions about making 3D assets can be posted in the 3D asset design forum. Either post them in the subforum of the modelling tool you use or in the general forum if they are general.
    • Questions about aircraft design can be posted in the Aircraft design forum
    • Questions about airport design can be posted in the FS2020 airport design forum. Once airport development tools have been updated for FS2020 you can post tool speciifc questions in the subforums of those tools as well of course.
    • Questions about terrain design can be posted in the FS2020 terrain design forum.
    • Questions about SimConnect can be posted in the SimConnect forum.

    Any other question that is not specific to an aspect of development or tool can be posted in the General chat forum.

    By following these guidelines we make sure that the forums remain easy to read for everybody and also that the right people can find your post to answer it.

FSXA Spinning

F

flotocki

Messages
351
Country
ca-ontario
When I prepare FSX for a flight I check to see if every thing is working like it should. Recently I clicked on the Y key to move around and the aircraft goes into a temper and spinds drastically. Every thing else is okay, I can get a beutifull fijght with no problems after I click on the Y key.
Does anyone know how I might fix this? Frank!
 
Hi,

I too had this problem.

Open FSX and go to Settings→Controls→Control Axis. For the flight Mode, select "Slew". Then select 'Slew (rotate Axis)' from the list, and delete the key/Joystick assignment.

attachment.php


Then click OK.
 

Attachments

  • Controls.PNG
    Controls.PNG
    52.8 KB · Views: 1,950
Hi,

Well my joystick has gone out of control as well.
At first I had this slew problem that when slewing at first all is normal but suddenly the plane starts slewing to the right. I disabled this rotate axis in the settings and that helped.
But now I have several other problems in that during the flight the throttle sticks to about 40% and never goes to idle and the balance is completely gone (center is off).
I have to unplug the joystick and plug it in again, go to settings, properties, calibrate again and then all is well for a short time.
No other programmes are running.I tried the latest driver for my Saitek Cyborg EVO but no joy.
Anyone a clue or should I complain to Saitek?
(I do not fly much because I am mostly making scenery but still, you like to fly once in a while and land decently.)
 
robystar said:
Hi,

Well my joystick has gone out of control as well.
At first I had this slew problem that when slewing at first all is normal but suddenly the plane starts slewing to the right. I disabled this rotate axis in the settings and that helped.
But now I have several other problems in that during the flight the throttle sticks to about 40% and never goes to idle and the balance is completely gone (center is off).
I have to unplug the joystick and plug it in again, go to settings, properties, calibrate again and then all is well for a short time.
No other programmes are running.I tried the latest driver for my Saitek Cyborg EVO but no joy.
Anyone a clue or should I complain to Saitek?
(I do not fly much because I am mostly making scenery but still, you like to fly once in a while and land decently.)
Click to expand...

what kind of stick you have?
nm, i missed it initially.

I had this style issue with my x52 set when i first got it. I had to install the drivers from saitek's website, as the disk software was corrupted. I had to use the 64 bit for win 7 (when i was on 64 vista).
I also had a Cyborg that went haywire is this fashion. I took it apart and discovered it was weakening in based connections that became weak over time. I was unable to fix it without ordering new parts for it, so I kept it as a parts stick and got the x52, well worth the upgrade.
Now your issue may be different rooted, but this may help you figure it out.
 
Last edited:
Hi,

I still owe you a reply as I solved my problem.
I deleted all driver updates and let windows come up with what was in it (in Windows Vista) and Windows did come up with a driver dated 2006, but now everything works fine. Go figure!

Mmm, Merry Xmas, I am going to prepare my spaghetti robystargnese:).
 
Hi Kevin,

The second picture looks more like it except that I only use sketchup for making models:). Instead mine would be with passata di pommodoro, lots of garlic, basil, onions, olive oil, black pepper and parmigiano cheese (no salt necessary) and the spaghetti of course al dente. That is how the nonna made it.
So that you all may know how to make your own tasty dish when your wife or (girl)friend has once more blown the fuse because of your constantly sitting at your computer:D.
 
You must log in or register to reply here.
Back
Top