• Which the release of FS2020 we see an explosition of activity on the forun and of course we are very happy to see this. But having all questions about FS2020 in one forum becomes a bit messy. So therefore we would like to ask you all to use the following guidelines when posting your questions:

    • Tag FS2020 specific questions with the MSFS2020 tag.
    • Questions about making 3D assets can be posted in the 3D asset design forum. Either post them in the subforum of the modelling tool you use or in the general forum if they are general.
    • Questions about aircraft design can be posted in the Aircraft design forum
    • Questions about airport design can be posted in the FS2020 airport design forum. Once airport development tools have been updated for FS2020 you can post tool speciifc questions in the subforums of those tools as well of course.
    • Questions about terrain design can be posted in the FS2020 terrain design forum.
    • Questions about SimConnect can be posted in the SimConnect forum.

    Any other question that is not specific to an aspect of development or tool can be posted in the General chat forum.

    By following these guidelines we make sure that the forums remain easy to read for everybody and also that the right people can find your post to answer it.

VMO offset?

Messages
5
Country
argentina
As far as i know, the visual model origin of an aircraft in FS9/FSX/P3D is not only the reference point for the camera in the sim, it is also the center of all movements of it (pitch, roll, yaw...). According to Yves Guillaume's flight dynamics document, it must be set at the center of lift of the plane (25% MAC in most cases). The problem is, some good looking aircraft i know of (ex: TDS 737 and Libardo Guzman Concorde) have their VMO way off this point.
Is there any way i can change the VMO longitudinally using any MDL viewer or tweaker (i use Model Converter X), or it is entirelly coded into the MDL file and thus unable to edit?
 
As far as i know, the visual model origin of an aircraft in FS9/FSX/P3D is not only the reference point for the camera in the sim, it is also the center of all movements of it (pitch, roll, yaw...)

This is not the case. The visual model is only that, a visual reference and those polygons have no interaction with C.E. or C.G., those attributes and all flight dynamics are defined by the AIR file and the aircraft.cfg. Regardless, your question is answered in it's entirety, in the first paragraph of the VMO section of the document you refer.

"The starting point for all [visual] offsets is the visual model origin specified by the designer of the visual model. It is the visual rotation point and designers should set it close to a typical CG position and ahead of the main gear. The location of the visual model origin is coded in the .mdl-File and cannot be changed without having the source files for the visual model."
https://library.avsim.net/esearch.php?CatID=fsxmisc&DLID=170811

According to this and other sources, the center of all movements is the CG position and designers should set the VMO close to the CG, for visual accuracy. Conversely, if the VMO offset from the mathematical CG is consistently carried to all transformations (animations), then the visual offsets will exactly mimic the flight dynamics and this is how the models you describe above are able to function normally.
 
Thanks for the answer. I remember downloading a Huey helicopter for fs2002 once, and its VMO was placed like 5 meters aft of the main rotor head. It may not affect aerodynamics, but seeing the whole thing yaw around that point from the external view and not from the main rotor made it look very unrealistic. The TDS 737 also is by default very nose heavy, to the point that rotation is almost impossible without large trim imputs. It made me mad, trying to adjust CG, weight, until i thought for a moment and opened the .air file and looked for the wing center of lift offset (R1534). It was zero. I changed it to 8.6 (the distance between the vmo and the 25%mac position). It flies perfectly fine now. Its a pity that so many people complained about this problem while a very simple solution was there, so i might upload the modified .air file to the main fs forums.
 
Sorry, it seems like you still don't get it. To me, it looks like you are confusing a visual offset, with a physical offset. Imagine, please, that the airplane, Huey, or whatever, exists as a purely mathematical concept. Within the invisible core of the sim, the vehicle is a perfect as can be. Now, imagine a piece of mud was thrown at the computer monitor. That piece of mud is the visual model and it has the visual model offset somewhere. It has absolutely no bearing on how the perfect virtual Huey flies, in fact, the reverse is true.
If the modeler designed his blob of mud to exactly mimic the action of the Huey, as it banks for a turn, for example, then the mud will bank appropriately. If not, then the model will just sit there, innocently. The visual model is a ghost, a sham, it is the wispy Bat Signal for the very real and invisible Batman and it is only there to make our eyes happy.

Your statement about the AIR file is incongruous. The AIR file dynamics has no direct relation to the visual model. If there is a variable for the VMO, then that is the coordinate location that the blob of mud should be placed. If the "actual" VMO has been placed five meters to the left of the model, then the model will render, fly and perform with a five meter shift to the right of the camera view. The adjustment you made, was almost certainly in relation to the virtual aircraft's center of effort, or center of gravity.

Finally please, try to remember that every single model is someones Mona Lisa. She may be a little nose heavy, but she's mine - or someones. If the solution is so simple, you can avoid infringement by instructing people how to perform the modification within their own system.
 
Back
Top