• Which the release of FS2020 we see an explosition of activity on the forun and of course we are very happy to see this. But having all questions about FS2020 in one forum becomes a bit messy. So therefore we would like to ask you all to use the following guidelines when posting your questions:

    • Tag FS2020 specific questions with the MSFS2020 tag.
    • Questions about making 3D assets can be posted in the 3D asset design forum. Either post them in the subforum of the modelling tool you use or in the general forum if they are general.
    • Questions about aircraft design can be posted in the Aircraft design forum
    • Questions about airport design can be posted in the FS2020 airport design forum. Once airport development tools have been updated for FS2020 you can post tool speciifc questions in the subforums of those tools as well of course.
    • Questions about terrain design can be posted in the FS2020 terrain design forum.
    • Questions about SimConnect can be posted in the SimConnect forum.

    Any other question that is not specific to an aspect of development or tool can be posted in the General chat forum.

    By following these guidelines we make sure that the forums remain easy to read for everybody and also that the right people can find your post to answer it.

prepar3d

  1. kevinmdavis2010

    P3D v4 Addon Scenery Error

    Good morning, For the past week or so, P3d4 isn't accepting any of my addon scenery. It has never done this before in all the time I've been using the Simulator. Whenever I try to "point" the folder with all of the addon scenery (BGL's) I have into P3d's Scenery Library, I get errors that...
  2. G

    P3D v4 Help with first gauge development

    Hi Everyone, I am a software developer and needed a checklist window to show up in VR in PMDG. After reading a bit about gauges and panels, I created my first gauge! Everything went fine until I ran Prepar3d, clicked on Test Panel -> No Content. No errors when loading the PMDG either. PMDG...
  3. R

    Jet Provost T.4

    Exterior model progress. Rotorhub
  4. Albi

    P3D dynamic light problem

    I have been playing with dynamic light for P3D 4. Added a spot light, set the orientation to face down to the ground. Added the created .fx to P3D's effects folder but when I test it in P3D, its always in the default sideways angle. Also it doesn't follow my light intensity parameters...
    • Albi
    • Thread
    • dynamic lighting mcx prepar3d
    • Replies: 1
    • Forum: Prepar3D
  5. Vitus

    Blender -> FSX/P3D

    Hey guys, I was wondering if any of you aircraft modellers successfully switched over to Blender 2.80 and if so - how? I would really like to dive into Blender, since no other 3d software can beat its price tag. But it seems as if most users here use it for scenery creation and I find the...
  6. MANOCHVARMA RAMAN

    How to get the path of installed P3D version via code from registry?

    Hi, I would like to get some info based on the code below. I wanted when running this script via .cmd, it will look for the registry of P3D installed on our pc and will copy the path and paste it to the red fonts in the codes below. @echo off REM Batch Script for Prepar3D V4 REM Add the...
  7. C

    P3D v4 Making runway textures

    Hello everyone! How are you making runway textures? I tried one tiling texture for all runway. I am doing small airport, and there are a lot of cracks, potholes and etc. So if I made base tiling texture, now I have to make lots of planes with crack textures and etc. This method is really...
  8. Vitus

    P3D v4 Throttle/Mixture overwrite using simConnect. Problem: FSUIPC

    Hi folks, It's been a while. I've been super busy getting the update for my Vega out of the way. Since the update, some of my customers experienced some issues in combination with FSUIPC and I was wondering if someone here has an idea how to resolve this. I am overwriting the sims throttle and...
    • Vitus
    • Thread
    • fsuipc fsx prepar3d throttle overwrite
    • Replies: 10
    • Forum: Gauges
  9. Alpha2Echo

    QMID 11 Cell Exclusion

    Hi there, I really like the idea of TSP. I'm trying it out at the moment for my actual project, I decided to do so because I need a tool for simple flatten hole creation. Pretty nice so far. Here's my question: When exporting the bgl for P3D I am asked if I want to exclude everything within...
  10. A

    P3D v4 Help me with understanding of Material Alpha Test and transparency

    Hello everyone! Guys, firstly, please watch this video Then look at the screenshots, and you will clearly see 2 problems here. And if you know how i can get rid of them, please, help me. I'm fully confident it's something about material propreties, something about transparency and material...
    • Armas212236
    • Thread
    • alpha channel alpha test material material alpha test prepar3d test transparency
    • Replies: 0
    • Forum: 3D Objects General
  11. T

    Good Scenery performance

    Hello everybody, I would like to know how e.g. Jo Erlend Sund can achieve such a good performance with his complex and very detailed sceneries. Thank you very much
    • Tester
    • Thread
    • fsx performance prepar3d scenery scenery design
    • Replies: 0
    • Forum: General chat
  12. Pablo R.

    FSX Help with airport elevations

    Hello, I have a problem with elevations in the airport I'm developing. It's an airfield that is not included by default, so I have to make it from scratch. As it's in the middle of the countryside, there are little elevation variations and when I try to place the runway with Instant Scenery it...
  13. seippg

    ILS values in .cfg file

    I'm trying to fix both the ILS intercept and hold on an aircraft. On the intercept, the airplane waits until the GS passes below and then tries to catch it. It also overshoots the localizer a bit. As far as I know, these are the vars that control how the aircraft manages itself on the ILS...
  14. T

    P3D v3 night texture issue

    hi,guys!this is tyxxxi from china,There are some questions I would like to ask.I am making night texture,But I do not know where the problem is,When I dragged the DayNight_Variations.inf file to resample.exe, nothing happened,can you show me your inf file?or tell me how to calculate Xdim and...
    • tyxxxi
    • Thread
    • compile error prepar3d texture
    • Replies: 4
    • Forum: Prepar3D
  15. rcunningham12

    Modeling position available at Viewpoint Technologies (Paid Job)

    Hello all, We are looking to recruit modelers for a aircraft project that will be very unique. Our company is looking to expand from the 3 members we have in scenery development to a few in aircraft development. This project is very important to us as it has been very much considered for and...
  16. Max_Kaptelkin

    P3D v3 RDS - UUML Severka Airfield (Released)

    UUML Severka Airfield RDS - Russian Digital Simulations Severka - private airfield, sports airfield and airfield GA. Located in the Kolomna district of Moscow region,73 km from Moscow or 53 km from UUDD Domodedovo Airport. The airfield is used for deployment and execution of flights by...
    • Max_Kaptelkin
    • Thread
    • fsx prepar prepar3d rds russiandigitalsimulations serevka steam
    • Replies: 16
    • Forum: Showroom
  17. Scarebus10101

    P3D v3 How to make a Photo real Town?

    Hey Guys! Once again im am starting with new scenery after finshing my first one which can downlaoded here if you wish to ;) : http://www.avsimrus.com/f/fsx-scenarii-83/scenariy-aeroporta-gomel-umgg-fsx-p3dv3-60020.html Anyways to get into the point Im trying to make a small town in Belarus...
  18. A

    Exporting placement file error P3D SDK 3D's Max 2015

    Hello everyone here! Guys, can someone help me? I'm working in 3D Max 2015 with Modeling SDK Plugin for it (64bit - win 10 64bit). Trying to build some objects, when exporting .x file and .mdl, all works just fine. Only problem i've encountered, is that when i'm trying to export placement file i...
    • Armas212236
    • Thread
    • 3ds max 2015 error export file placement prepar 3d sdk prepar3d
    • Replies: 0
    • Forum: Prepar3D
  19. TheAri

    Bombardier CS300

    Hello, I've been wanning to start my first Plane Model and make the CS300. I have two questions to you. 1. Are you interested to fly this plane in Flight Sim? :) 2. Do you all experienced creators have some tips for an starter like me? Greetings :)
    • TheAri
    • Thread
    • bombardier cs300 fsx prepar3d
    • Replies: 15
    • Forum: Showroom
  20. Fern

    Prepar3D: Timed objects

    Is there a way to "tweak" objects so that we can time their showing in Prepar3D? Thanks Fern
    • Fern
    • Thread
    • p3d prepar3d timed tweak
    • Replies: 2
    • Forum: MDL Tweaker
Back
Top